JOYO JF-33 Analog Delay Guitar Effect Pedal User Manual
- June 5, 2024
- JOYO
Table of Contents
JOYO JF-33 Analog Delay Guitar Effect Pedal
Warning
- Do not disassemble or repair this unit by yourself.
- Do not use or store this unit in the following circumstances: high temperature, high humidity, dirty or strong shock places.
- Do not drop off this unit or bump this unit off hard surface.
- Do not use cleaning liquid or alcohol to clean this unit in case of damage.
- Remove batteries if not using the unit for a long period of time.
- Please dispose the used battery properly.
Batter replacement
The unit is without battery
- With a screwdriver to open the back cover
- Put on the battery by placing the negative (-) pole of battery facing inside, Replace the back cover.
How to use
- Connect the input jack with the guitar lightly, the effect pedal will start working automatically.
- TIME–adjust delay time, which increases with the clockwise rotation of the TIME knob. Please set TIME to actual needs.
- REPEAT–adjust delay repeat times, when the REPEAT knob is rotated in clockwise, the times of the delay repeat would be more, and the least frequency is one time. Please set the REPEAT to actual needs.
- MIX–adjust the contrast proportion, under clockwise rotation of the MIX knob, the proportion between the original signal and delay signal would become larger, and comes to 1: 1 when rotates to the most.. Please set the MIX to actual needs.
- When the effect pedal is powered with battery, it works only when the jack is connected with IN end; when the effect pedal is powered with adapter, it would cut the battery and imply adapter for power supply.
- If the pedal rests for a long time, please take out the battery in case of battery leakage or interior destroy of the pedals.
specifications
- Input Impedance: 1 M Q
- Output Impedance: 1 KQ
- Running Current: 40mA
- Power: 6F22 9V Battery/ DC 9V adapter
- Dimension:118(L)X68(W)X50(H) mm
- Weight:200g
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>