JOYO JF-15 California Sound Guitar Effect Pedal Amp Simulator User Manual

JOYO JF-15 California Sound Guitar Effect Pedal Amp Simulator

Warning

1. Do not disassemble or repair this unit by yourself.
2. Do not use or store this unit in the following circumstances: high temperature, high humidity, dirty or strong shock places.
3. Do not drop off this unit or bump this unit off hard surface.
4. Do not use cleaning liquid or alcohol to clean this unit in case of damage.
5. Remove batteries if not using the unit for a long period of time.
6. Please dispose the used battery properly.

Battery replacement

1. Press the front of the battery cover and then slide back to remove the cover. Take out the flat batteries.
2. Put the battery into the battery compartment by placing the negative(-) pole of battery facing inside. Insert the front of cover and then press down and push to close.

HOW to use

1. Connect the input jack with the guitar tightly, the effects pedal will start working then.
2. LOW Adjust the low frequency.
3. Adjust tne middle Trequence.
4. HIGH Adjust the high frequency.
5. VOICE Adjust the Frequency response and the distortion, together with the adjustment of DRIVE, it can simulate many kinds of Amplifier.
6. DRIVE–Gain control
7. LEVEL-Adjust the output level.
8. LED Will be in red light when the effect pedal is in use. if no light or in the dim light. please change new battery.
9. Power adapter When using the power adapter, the battery supply will be cut off automatically.

Specifications

1. Input Impedance: 1M
2. Output Impedance: 1K Running
3. Current: 6mA
4. Power: 6F22 9V Battery/ DC 9V adapter
5. Dimension:120(L) X97(W)X55(H) mm
6. Weight:390g

JOY TECHNOLOGY CO., LTD Address: 2/F, Lushi Industry Building, 28th District, Bao’an, Shenzhen, 518133 China. www.joyoaudio.com Email:info@joyoaudio.com Tel: 0086-755-29765381

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>