JOYO JF-01 Classic Flanger Effect Pedal Achieve Metallic Flanger User Manual
- June 5, 2024
- JOYO
Table of Contents
JOYO JF-01 Classic Flanger Effect Pedal Achieve Metallic Flanger
Warning
- Do not disassemble or repair this unit by yourself.
- Do not use or store this unit in the following circumstances: high temperature, high humidity, dirty or strong shock places.
- Do not drop off this unit or bump this unit off hard surface.
- Do not use cleaning liquid or alcohol to clean this unit in case of damage.
- Remove batteries if not using the unit for a long period of time.
- Please dispose the used battery properly.
Battery replacement
- Press the front of the battery cover and then slide back to remove the cover. Take out the flat batteries.
- Put the battery into the battery compartment by placing the negative(-) pole of battery facing inside. Insert the front of cover and then press down and push to close.
How to use
- Connect the input jack with the guitar tightly, the effects pedal will start working then.
- REGEN –Adjust the effect strength.
- DELAY TIME–Adjust the effect frequency
- WIDTH–Adjustthe effect depth.
- SPEED–Adjust effect speed.
- LED will be in red light when the effect pedal in use. If no light or in the dim light, please change new battery.
- Power adapter—When use the power adapter, the battery supply will be cut off automatically.
Specifications
- Input Impedance: 500KO
- Output Impedance: 10KO
- Delay Time:0.9ms-6.4ms
- Speed Range:0.4HZ-8Hz
- Running Current: 20mA
- Power: 6F22 9V Battery/ DC 9V adapter
- Dimension:120(L)X97(W)X55(H) mm
- Weight:390g
JOYO TECHNOLOGY CO., LTD
Address: 2/F, Lushi Industry Building, 28th District, Bao’an, Shenzhen, 518133
China.
www.joyoaudio.com
Email: info@joyoaudio.com
Tel: 0086-755-29765381
Read User Manual Online (PDF format)
Loading......