OVSE OCULAR LTE Universal Charging Station User Guide

June 5, 2024
OVSE

OVSE-OCULAR-LTE-Universal-Charging-Station-LOGO

OVSE OCULAR LTE Universal Charging Station User Guide

OVSE-OCULAR-LTE-Universal-Charging-Station-PRODUCT

Ocular Home Overview

Accessories of Tethered ModelOVSE-OCULAR-LTE-Universal-Charging-Station-
FIG-1
Station OverviewOVSE-OCULAR-LTE-Universal-Charging-Station-
FIG-2

Technical Parameters

Level 2 EV Charging Station

  • Phase Mode: Single Phase Installation Method: Wall/Stand Certificate: CE, TUV, RCM
  • IP Rating: IP66
  • Rated Voltage: 230VAC +/- 10%Rated Current: 32A
  • Maximum Power: 7.4 kW
  • Ambient External Temp: -25°C ~ +55°C Enclosure Material: ABS+PC alloy
  • Phase Mode: Three Phase Installation Method: Wall/Stand Certificate: CE, TUV, RCM
  • IP Rating: IP66
  • Rated Voltage: 380VAC +/- 10%Rated Current: 32A
  • Maximum Power: 22 kW
  • Ambient External Temp: -25°C ~ +55°C Enclosure Material: ABS+PC alloy

Instruction for Use

OVSE-OCULAR-LTE-Universal-Charging-Station-
FIG-3

Installation Guide

OVSE-OCULAR-LTE-Universal-Charging-Station-
FIG-4OVSE-OCULAR-LTE-Universal-Charging-
Station-FIG-5

Wallbox Overview

**Accessories of Universal Model

OVSE-OCULAR-LTE-Universal-Charging-
Station-FIG-6
OverviewOVSE-OCULAR-LTE-Universal-Charging-Station-
FIG-7
**

Technical Parameters

Level 2 EV Charging Station

  • Phase Mode: Single Phase Installation Method: Wall/Stand Mode: Universal Socket
  • Certificate: CE, TUV, RCM
  • IP Rating: IP66
  • Rated Voltage: 230VAC+/-10%
  • Rated Current: 32A
  • Maximum Power: 7.4 kW
  • Ambient External Temp: -25°C ~ +55°C Enclosure Material: ABS+PC alloy Start Mode: Button (default)
  • Phase Mode: Three Phase Installation Method: Wall/Stand Mode: Universal Socket
  • Certificate: CE, TUV, RCM
  • IP Rating: IP66
  • Rated Voltage: 380VAC+/-10%
  • Rated Current: 32A
  • Maximum Power: 22 kW
    Ambient External Temp: -25°C ~ +55°C Enclosure Material: ABS+PC alloy Start Mode: Button (default)

**Instruction for Use

OVSE-OCULAR-LTE-Universal-Charging-Station-
FIG-8
**

Installation GuideOVSE-OCULAR-LTE-Universal-Charging-Station-
FIG-9OVSE-OCULAR-LTE-Universal-Charging-
Station-FIG-10

Illustration of Screen and LED

SINGLE PHASEOVSE-OCULAR-LTE-Universal-Charging-Station-
FIG-11


THREE-PHASEOVSE-OCULAR-LTE-Universal-Charging-Station-
FIG-12

For serious failures, the system cannot automatically recover. In order to remind user of this failure, the system will automatically countdown 10 seconds to restart.

Safety Warning

  • Regularly check whether the charging station has visible damage.
  • Make sure that all safety facilities are available at all times and are tested regularly to ensure they can operate normally. Visit ocularcharging.com.au for a yearly maintenance check according to
  • Australian standards.
  • If a ground fault occurs, it must be assumed that the cable carries voltage. Please confirm that there’s no high-voltage power in the system before inspecting the charging station.
  • Persons who install and use charging stations must obey the principles and regulations mentioned to ensure personal and equipment safety.
  • Before powering on the device, please confirm that the device is properly grounded to avoid unnecessary accidents.
  • All tools’ unnecessarily exposed metal parts should be insulated to prevent them from touching the metal frame to avoid short circuits.
  • Do not modify, retrofit, or change any part by yourself under any circumstances.
  • To ensure the service life and stable operation of the charging station, the operating environment should be kept clean as possible with a relatively stable temperature and humidity. The charging station must not be used in a flammable environment or environments with volatile gas.
  • Be sure to confirm that the input voltage, frequency, circuit breakers and other conditions of the device meet the specifications before the device is powered on

Maintenance

Ocular Home is only recommended for use in residential applications and use outside of this area (i.e. for commercial applications) is outside of warranty. In order to ensure the normal service life of the charging station and reduce risk, maintenance must be performed every 12 months. The maintenance and installation of the equipment must be completed by licensed electricians with. Visit ocularcharging.com.au to book your service. The product should be placed at an ambient temperature of -25C~+55C in relative humidity of no more than 95%. The air should not contain acids, alkalis, or other corrosive and explosive gases. Ocular Charging Stations are subject to stringent quality inspections. From the day of purchase, any problem quality can be reflected to the dealer within two years. Any direct damage or malfunction caused by neglect, incorrect use, installation, usage, repair by the users or natural damage are not covered by the warranty.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals