Robi SP3 Smart Jump Rope User Manual

**Robi SP3 Smart Jump Rope User Manual

**

Product Feature

1. LCD display
2. Power on/Power off/Reset/Mode Button
3. Type C USB charging port
4. PU steel rope

Product LCD Display

1. BT icon indicates Connected
2. Battery indicator, it will flash when low power to remind you to charge
3. Free jumping mode. jam without time repetition remit.
4. Time countdown mode: jump with n time limit. You am choose from 30 seconds, I minute, 5 minutes, 10 minutes, and customized time on the Skipyjoy App. Without the app , the device will record the last selected period of lime
5. Jump countdown mode : set a limit of jump rope& You can choose from 50.100, 500.1000. and customized lump ropes on the skipyjoy App Without the App, the rope will record the last completed set of reps.
6. Number of jumps
7. Jumping time

Display in Different Modes

1. Countdown timer mode

2. Countdown number Mode

3. From slopping mode

Installation of the jump Rope

The jump handle and the rope are packed separately in the box, please follow the below steps to install the rope and adjust the length accordingly.

Important Note : To avoid Inaccurate, please make sure the longer rope is installed in the inside part of the handle.

Operation

1. Before starting using the jump rope, please download the App: Skipjoy from App store or google play, Or you can scan below QR code to  download the app
   

2. When you install the App, please accept the permission requirement on Bluetooth, GPS and location. If your phone is operated under Android system
   Note: It is required by google that all the smart phones operated with android Ver . 6.0  or above must ask for the permission of location . If any BLE device could be scanned and linked through Bluetooth . Any private information would not be collected by the app. You can also refer to the official document of google for more information: https://source.android.com/devices/bluetooth/ble

Allow Bluetooth for iOS

Allow Bluetooth for Android

3. Open Skipjoy App, fill in your personal info, and start the App
   

4. Skipjoy will automatically pair the jump rope, you can check the main interface on the App to check the status of connection.

   • “Connected” shown on the main interface means successful pairing
   • “Disconnected” shown on the main interface means unsuccessful pairing. In this condition, please press ” mine”…”Device”..>”+” to  add the device manually.

5. Click the mode you need on the main interface on the App to start your  jumping.

Jumping Modes

Free jumping/ Time countdown Jumping/Numbers countdown Jumping

1. Keep pressing the button for about 3 seconds to shift the mode you need.
2. You can also choose the mode from app

Free Jumping

Jump the rope freely and there is no limit on time and number of jumps

Time countdown Jumping

• Set the total jumping time.
• Options for time can be set on App 30 sec, 1 min, 5 min. 10 min, and customized time.
• Without the app, the rope will use the last countdown setting of time from the app.

Number countdown Jumping:

• Set the total jumps
• Options for number of jumps can be set on App: 50, 100, 500, 1000 and customized number of jumps.
  

Offline storage function

Without the running of App. the data of your jumping will be recorded temporarily by the rope and synchronized with the App after re connection.

Reset the rope

Press the button on the beck of the LCD display 1 or 8 seconds. the rope will be reset The LCD will show all the signals for 2 seconds and then shut down. Press the button again to enter the normal use

Caution and Maintenance

• Do not put the rope in very wet or ht environment
• Avoid hating or dropping the rope violently. otherwise damage may occur.
• Treat the rope with cafe as it is an electronic instrument
• Do not immerse the handle into water or use it whilr raining, because it is not waterproof and damage mau occur to the built- in electronic device
• The rope is only used for the purpose of physical exercise. Do not use it for other purposes.
• Be careful when using the rope to avoid any injuries, and children under 10 are suggested to use the rope under the watch of parents.

Battery and recharge

Battery: The rope has a built in Lithium-ion battery which could sustain normal use of about 25 days calculated based co a daily use of 15 minutes, actual using time varies according to the environment and time of use. The typical stand-by time is 33 days (experimental data of the manufacturer under the temperature 25C and humidity 65%RH.

Recharge: If the signal shows on the screen, please recharge the rope using a normal mobile phone charger with a standard Type-C USB plug. During the changing process, the batten, sire, of the LCD will flash unto we battery its full.

Tips For Battery

• For the  better life of span of the battery, do not leave the rope with no battery for a long time. It is suggested to charge the rope when the battery is low. when you do not use the rope for a long time, it is suggested to charge the rope once a month
• Do not open the handle lest any damage would happen to the rope
• Do not burn the handle with batteries to avoid explosion of the battery.
• The rope should not be disposed  of with household waste. Please check with your  local authority for battery recycling.

FCC Statement

This device Complies with Part 15 of the FCC Rules. Operation is subject to the following two condition

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

Dispose of the device in an environmentally friendly manner
Dispose of it at a recycling center for used electrical and electronics devices.
You can obtain more information  from your local authorities.

The packaging material is recyclable ,please dispose of it in an environmentally friendly manner and take it to a recycling centre.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>