Lenco PIR-510 Portable Internet DAB+ FM Radio with Rechargeable Battery User Manual

: June 5, 2024
: Lenco

Table of Contents

Model: PIR-510
- PRECAUTIONS BEFORE USE
KEEP THESE INSTRUCTIONS IN MIND:
INSTALLATION
Network Configuration
- Standard network configuration
INTERNET RADIO
CONFIGURATION
13. Technical Specifications
References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

Model: PIR-510

USER MANUAL Portable Internet, DAB+, FM radio with rechargeable battery

Version : 1.0

PIR-510

CAUTION:

Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2″) free space around the whole device.
Install in accordance with the supplied user manual.
Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-generating products or naked flame. The device can only be used in moderate climates. Extremely cold or warm environments should be avoided. Working temperature between 0° and 35°C.
Avoid using the device near strong magnetic fields.
Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static-free environment.
Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product.
Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.
The device shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.
Do not use this device when condensation may occur. When the unit is used in a warm wet room with damp, water droplets or condensation may occur inside the unit and the unit may not function properly; let the unit stand in power OFF for 1 or 2 hours before turning on the power: the unit should be dry before getting any power.
Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.
This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.
Keep away from animals. Some animals enjoy biting on power cords.
To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To remove severe stains, you may use a damp cloth with dilute detergent.
The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.
Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be corrupted or lost.
If the unit has USB playback function, the USB memory stick should be plugged into the unit directly. Don’t use an USB extension cable because it can cause interference resulting in failing of data.
The rating label has been marked on the bottom or back panel of the device.
This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or a lack of experience and knowledge, unless they’re under supervision or have received instructions about the correct use of the device by the person who is responsible for their safety.
This product is intended for non professional use only and not for commercial or industrial use.
Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position vibrations or shocks or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.
Never remove the casing of this device.
Never place this device on other electrical equipment.
Do not allow children access to plastic bags.
Only use attachments/accessories specified by the manufacturer.
Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as the power supply cord or the plug, when liquid has been spilled or objects have fallen into the device, when the device has been exposed to rain or moisture, does not operate normally, or has been dropped.
Long exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.
If the product is delivered with power cable or AC power adaptor:
- If any trouble occur, disconnect the AC power cord and refer servicing to qualified personnel.
- Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point. Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out of children’s reach! When playing with the power cable, they can seriously injure themselves.
- Unplug this device during lightning storms or when unused for a long period.
- The socket outlet must be installed near the equipment and must be easily accessible.
- Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
- Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.
- Devices with class 2 construction do not require an earthed connection.
- Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can cause a short circuit.
- Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock.
If the product contains or is delivered with a remote control containing coin/cell batteries:
Warning:
- “Do not ingest battery, Chemical Burn Hazard” or equivalent working.
- Keep new and used batteries away from children.
- If the battery compartment does not close securely, stop using the product and keep it away from children.
- If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
Caution about the use of Batteries:
- Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
- Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
- Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery that can result in an explosion.
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or that leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
- Attention should be drawn to the environmental aspects of battery disposal.

INSTALLATION

Unpack all parts and remove protective material.
Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.

1. Accessories

USB charging cable

User manual

2. Product Overview

PIR-510 - Product Overview 1

PIR-510 - Product Overview 2

2.4″ TFT colour screen
Left button
Standby/Menu button
Vol/Nav/OK dial knob (turning=Volume up/down / scrolling; pressing=Select)
FAV button
Alarm button
Sleep button
Right button
Headphone socket
DC IN
USB port
On/Off switch button

Note:

WiFi allows data transfer over short distances within 20 meters without the need of cabling between the devices. Walls/cellings may reduce the strength of the WiFi csignal.

Therefore try to locate the Lenco PIR-510 and/or the access point within the distance mentioned above, and avoid obstacles between the devices.

Make sure you are connecting to a 2.4Ghz Wifi network (this device is not compatible with 5 Ghz Wifi networks)

Initial use

The PIR-510 doesn’t come with a supplied power adaptor. To charge the device, please connect it with the supplied micro USB cable to a 5V usb adaptor (example: smartphone charger) or connect it to the usb port of a computer to charge.

While charging you can switch the device on with the main power switch (12) on the side.

At the initial start of the PIR-510, it will ask you to set Language and Network Configuration. Follow the instructions in this manual, how to configure.

Longpress the Standby button will switch to standby mode. Short press this button to turn the unit on again.

If you won’t be using the PIR-510 for a longer period, it is better to use the main switch on the side

Wifi setup wizard

1. When it is first time running the device, it will ask you to set Language and Network Configurations.

2. Do you want to check the WIFI network availability when powering on the device? Use the Navigation wheel to select the desired option and press the Navigation wheel to confirm.

3.1. Select YES if you want to continue and connect to your WIFI network using the standard method. Press the Navigation wheel to confirm. Continue reading ‘network configuration’ option 1.

3.2. Select YES (WPS) if you would like to set up with the WPS (WIFI PROTECTED SETUP) function of your router (please verify with your router’s manual if it’s available). Press the Navigation wheel to confirm. Continue reading ‘network configuration’ option 2.

3.3 Select NO and Press the Navigation wheel to confirm if you want to skip the Wireless network setup. You can configure it later in the configuration menu.

Network Configuration

Standard network configuration

When selecting this option the PIR-510 will scan for available WIFI networks.

The display will show the WiFi networks it found.

Select your WIFI network by turning the Navigation/OK wheel and confirm by pressing the Navigation/OK wheel.
If your selected WIFI network requires a password, you can enter it in the next screen.

If you want to enter the password, turn the Navigation wheel to select the first character and then press the button to move forward to the next character. To make a correction, press the button to go back and delete the last character at the same time. When the password is completed, press the Navigation/ok button to confirm

Note: following characters can be used:

Numbers (from 0-9)
Latin characters (from A to Z and from a to z)
Characters (@,Blank,!,”,#,$,%,&,*,’,+ and (,)

It may take a few seconds to establish the connection to the network.

INTERNET RADIO

From the main menu use the Navigation wheel/ok to select INTERNET RADIO and press the Navigation wheel/ok to start.
Now you can use the Navigation wheel/ok again to scroll through the different menu options and select the desired option by pressing the Navigation wheel

Press to return to the previous menu.

After successfully connecting to a radio station, the station information will be shown. This information can be changed by pressing the or button.

Below you find the explanation of the various Internet Radio menu options:

My Favorite

These are your favorite preset stations. It can hold up to 250 entries.
To add a favorite internet radio station, press and hold the “FAV” button to save the station as a favorite.

You can add favorites when playing the station you want to add as favorite or add them directly from the ‘Radio Station/Music’ list. Press and hold the “FAV” button to save it.

You can replace already saved favorites with a new favorite station.

Favorite radio stations cannot be stored twice The saved stations are showed by selecting this menu. You may also press the “FAV” button to bring up the saved station list.

Selecting a radio station from the favorites list.

Press the “FAV” button to show the favorites list. Rotate the navigation wheel to move through the favorites list. Press the navigation wheel to listen to the selected favorite.

Enter a submenu with button, Delete, Shift Up/Down along the list, Rename, Play, or Use as Alarm (if you chose internet as alarm sound in the alarm configuration).

Radio Station/Music

Radio Stations are categorized into sub categories Global Top 20, Genre, Country/Location (Africa, Asia, Europe, Middle East, North America, Oceania/Pacific and South America) and Highlight. Press the navigation wheel, to select the subcategories and choose a station to listen to. For each station, press the navigation wheel on the unit to play directly.

Press to enter its submenu. When you choose Auto Scan, it plays each station in this subcategory for 30 seconds until all stations have been played. You can cancel the auto scan function by pressing “OK”. Press the button to view information about the active radio station.

Sleep Radio:

You can choose Birds, Lullaby, Piano, Rain, Spa, Space, Wave and White Noise as sleep radio.

History:

List of the ten recently listened stations.

Service:

Search Radio Station: Enter a stations name/keyword to search through the list of all radio stations.

Add New Radio Station: by using an IP address/web address, the added station will be stored in the ‘My Favorite’ list.

App: scan the QR code to download the AirMusic Control App

Note that the maximum character of the station name is 250

Media Center

With Media center you can play music from USB or UPnP.
Use the Navigation wheel to select one of the following functions:

USB: Play music from an external USB-Device.

Press button on the device or button on the remote control to start play.

Press button on the device or button on the remote control to Pause.

Press button on the device or on the remote control to stop play.

Press and hold the <” and “>” to skip backward or forward to the desired track.

Press the button on the remote control to skip backward or forward to the desired track.

Press the < button to show the USB list.

UPnP: The UPnP service provides a system independent connection to any device for the data transfer. You can stream music from your computer to your speakers as long as the computer has an UPnP software installed as well and is connected with the same Wi-Fi network as your PIR-510
My Playlist: Here you can access your playlist.
Clear My Playlist: Here you can delete your playlist

My media U

Display and playback your own mediaU station list on the mediaU server. Set your account first. To activate your own station list, follow the steps below:

Access http://www.mediayou.net/. Join my mediaU membership. Login to the website;

Enter the wireless MAC address of Radio to the mediaU website. This information can be obtained in the menu -> information Center > System information > Wireless Info;

When successfully configured, you are able to save and view your own mediaU station playlist(s). User name and password is not required to enter to the Radio.

If there are different devices stored in your MediaU account, you can choose the one you currently use under Configuration menu. On the website, you may save stations to Favorite Station, set Favorite Location/Genre and My Local City, or add stations manually. The stations can be viewed from My Media mode on the Radio.

My Favorite: List of saved favorites. You can call or edit them, e.g. move or delete. To save a station, press and hold the [FAV] button while a station is being received. The same station can only be saved once.
Radio Station/Music: List of all radio stations. Search for the desired country and radio stations yourself. Categories of channels are Global Top 20, Genre, Country/Region and Highlight.
Local Radio: Automatically accesses the radio station in your area. This has the advantage that you only need to search for the radio station you want to hear (the radio station to be tuned can be changed under the settings).
History: Lists the recently listened radio stations.
Service: Search for radio stations or add new ones.

Air Music APP

You can use the Air Music control App to control your PIR-510 with your smartphone or tablet like you would do with the remote control.

You can download the Air Music App. From Android or Apple store like below.

Android: Apple iOS:

My MediaU
For using My mediaU, you have to register at the following webpage: www.mediayou.net.
After this is done, you have to register your device at this website. This can be done by clicking “my mediaU” >> “Radio”. Enter the devices name (free to choose, its just a name that you can remember), and the serial number, not free to choose. You can find the serial number under:
Informations-Center >> System Information >> Wireless Info >> MAC Address: You have to input this MAC Address at the website under serial number. Please note that this serial number is case sensitive.

Now you can add new radio stations under my mediaU (2 left of “Radio”).

PIR-510 - My MediaU

After you have added the radio stations the next steps will be done at the device.
Search for Configuration >> Manage my mediaU and ensure, that this setting is set to: “Enabled”

Now select my mediaU at the selection menu. Here you can see your previously added radio stations

Information Center

Weather Information: Here you can see the weather. You can add weather information to the Standby screen mode as well.
Financial Information: Here you can see the financial information (financial Index).
System Information: Here you can see the software version as well as WiFi information.

CONFIGURATION

Here you can configure various parts of your Lenco PIR-510 press ‘Enter’ to select the configuration menu.

Time Display	Analog/Digital
Manage my mediaU	When it is enabled, my mediaU will show on the main

menu. If various mediaU accounts exist in the Radio, Select the default login account in here.
Network| Wireless Network Configuration: Enable/disable WiFi network. When you enable the WiFi network, the system will automatically select the required AP. Enter WEP or WPA code to connect the WiFi.
Wireless Network (WPS PBC): If you are using a router with WPS/QSS button, you can set up the network connection easily via WPS function. Enter it and go to press the WPS/QSS button on your router within 120 seconds. The connection between the router and device will then be configured automatically.
Manual Configuration: You can choose DHCP (which assignes the ip address automatically) or manually input the IP address for wireless network connection. The following information has to be entered: SSID (name of access point), IP Address, subnet mask, default gateway, preferred DNS server, alternate DNS server.
Check Network When Power On: Enable/disable WiFi network. When you enable the WiFi network, the system will automatically search for available AP. Select the required AP.
Date & Time | Set Date and Time
Set Time Format: 12 Hour or 24 Hour
Set Date Format: YYYY/MM/DD, DD/MM/YYYY, MM/DD/YYYY
Daylight Saving Time (DST): On or Off

Tips: When “ON” is selected, the time will be one hour later than the current time.

Tips: When “OFF” is selected, the time will be same as the current time. If it was already in “Daylight Saving Time(DST)” and you choose ”OFF”, the time will be deducted by one hour, that’s to say, the time will be same as the actual time.

Alarm| There are 3 independent Alarms which can be set. 2 different Alarms (Alarm 1, Alarm 2) and one NAP alarm which is a countdown alarm which can be used when doing a quick sleep.
Press the Alarm button to enter the alarm settings menu directly and follow the following steps.
Setting the alarm
– Press the ‘Alarm’ button
– Select Alarm 1
– Select Turn On
– Press the navigation wheel on the unit.
– Press the ‘ok’ on the “Repeat:” option and select the how the alarm should work. (Everyday, once or select the required days)
– Press the left arrow key to return to the previous alarm menu then select “Time:” and press ‘ok’
– You now can use the up down buttons to change the highlighted Hours then press the right arrow button once to switch to the Minutes and use the up/down buttons to change the minutes. Press the ‘ok’ button to confirm.
– Select the “Sound:” and press the ‘ok’ button. Now you can choose between Beep, Melody, Internet Radio, FM, DAB/DAB+, USB, Spotify connect. If you have an account and already connected the PIR-510 to Spotify before: When internet radio is selected as wake up sound, you can use one of your favorite radio stations (which have to be stored as favorite on the PIR-510).

Note: when no internet connection is available within 1 minute after the alarm is activated the PIR-510 will automatically switch to Melody.

When selecting USB as wake up sound, you can select one of the music files stored on the inserted usb memory device.

Repeat the above steps to setup the alarm 2

Important notice: when using the PIR-510 in Battery mode, you may set the alarm, but the alarm symbols will not appear on the display meaning the alarm will not trigger as long as the unit is NOT connected to the mains power. If you connect the mains power, the symbols will show and the configured alarm will trigger.

Setting the NAP alarm

– Press ‘Alarm’ button
– Select NAP alarm
– Use the up/down buttons to choose the desired minutes You can choose 5/10/20/30/60/90 or 120 minutes and then press the ‘ok’ button to select
– Press the left arrow button to return to the main screen

When the NAP alarm is activated you see a clock icon on the lower right corner with the remaining time.

Timer| Countdown timer (max. 100min)
Scheduled Playing| Allow you to set a time for when the device switches on

Turn On

Select Repeat: Everyday, Once or Mon to Sun
Select Time: HH to HH
Select Sound: Internet Radio,FM,DAB/DAB+

Turn Off

Language| English/Deutsch/Espanol/Francais/Portugese/Nederlands/Italiano/Pyccknn/ Svenska/Norsk bokmal/Dansk/magyar/Cesky/Slovensky/Polski/Turkce/Suomi
Dimmer| Power Saving/Turn On
Display| Color/Monochrome
Power Management| This option configures when the PIR-510 should go into standby mode. You can select Turn off/5 minutes/15 minutes/30 minutes.
When configured, the PIR-510 will switch to standby when no music is played for the configured time.
Use the Turn off setting to ignore the standby function.
Sleep Timer| Turn off or set the sleep timer of 15/30/60/90/120/150/180 minutes. Once the time is set, there will be a bed icon with the remaining minutes at the top right corner of the display and the device will turn to standby after the configured time.
Internet Radio|

Buffer: configure the buffer time of the music playback 2/4/8 Seconds
Sound Quality: High or Low

Weather| Activate/deactivate the weather forecast on the standby display. Choose your preferred temperature unit (°F or °C) and then proceed by entering your location. When activated, the weather forecast is shown in turns with the clock display on the standby screen (it changes every 10 secs).
DAB/FM Setup|

FM Mode: Set Mono or Set Stereo
FM Threshold
Seek Threshold: Strong, Default or Weak
Stereo Threshold: Strong, Default or Weak
DAB Threshold: Strong, Default or Weak
Service following(FM-IR): Enable or Disable
Service following(DAB-IR): Enable or Disable

Local Radio Setup| There is a shortcut Local Radio from the Internet Radio menu so that you can easily go to the station list of your location. You can setup your location manually or let the system detect your current location. If you choose to automatically detect your location, the system will detect the location according to the IP address of your connected network. Press Local Station to enter the local radio station list directly.
Playback Setup| Select the play mode of the media center. You can select: Off (no repeat or shuffle), Repeat all, Repeat one, or Shuffle.
Device| The PIR-510 default device name for DLNA is “AirMusic”. You may rename it for DLNA setup on the PC or mobile. Use the QR code for download and install the “AirMusic” control App.
Menu| You can select “Local Radio, my mediaU, Internet Radio, Sleep Radio, USB, UPnP, Media Center, FM, DAB/DAB+, Spotify Connect, Information Center, Timer, Alarm” playing mode.
Equalizer| The default equalizer setting is “normal”, but you may change it to “Flat, Jazz, Rock, Soundtracks, Classical, Pop, News or my EQ”.
Resume When Power On| The system default setting is to resume the internet radio playback if you were listening to internet radio or media center before switching off the unit. If you turn this option off, the system will return to the main menu when switching on the unit again.
Software Update| If there is a software update on the server, the system will notify you. Before starting a software upgrade, ensure that the unit is plugged into a stable mains power connection.
Disconnecting the power during a software update may permanently damage the unit.
Reset to Default| Restore to default settings. After the device is reset, the system will show the language menu. Choose the desired language and press the navigate wheel

DLNA/UPnP

You may change the default DLNA name as you like.The information below is the introduction of how to setup media streaming from PC or other media server.Study the own instruction of the software or apps you use to enjoy music streaming if necessary. Make sure the music files are in the format of MP3, WMA, WAV or AAC for music streaming to the radio.

UPnP

Connect the PC to the network.

Ensure the Radio is powered on and connected to the same network.

Open the UPnP platform Windows Media Player (11 or later). Alternatively, other platforms or server such as Windows Media Connection may be used.

Allow to share your media to Radio.

Add the audio files and folders you want to share with radio to the media library.

You may also enjoy the streaming music from other music server, such as smart phone (Android platform)

Connect the mobile to the network

Search and install media sharing apps from Google Play.

Add the audio files from your mobile you want to share.

After setup the shared server, choose the music and control playback on the Radio.

DLNA

Besides UPnP, Radio supports DLNA function, you share the music files from PC or Android mobile, and you use your PC, Android mobile or iPhone/iPad to control music playback on the Radio. (It is not required to control each playback on the Radio.)

The PC system requirement for DLNA is Windows 7 and Windows Media Player 12.Setup as below: First, share the media on your PC to Radio.

Control Panel > Network and Internet >Network and Sharing Center >Change Advanced Sharing>Media streaming options

Open Windows Media Player to enable Allow remote control of my Player.

Right click any music in the library and choose Play to Radio.

There will be a window for controlling music playback on Radio.

You may search and install any free or commercial DLNA apps from Google Play or Apple Store if you are using Android mobile, tablet or iPhone/iPad. It is suggested to use bubble UPnP, Twonky Beam on Android mobile, tablet or Twonky Beam on iPhone/iPad. Some apps may not support streaming music from iPhone/iPod but iPhone/iPod could still be used to control streaming music from other servers.

Procedures for playing shared music on the app are as follows:

Select Radio as the player. Some apps may allow to play the music to multi players at the same time.

Select music server and choose the music.Some app can create a playlist if you choose several music.

Please note: When using DLNA music streaming function on the Internet Radio, you can only control the volume and standby via the unit.It is restricted to control the other functions. Stop DLNA on PC, mobile or tablet before you resume Internet radio’s own control.

Spotify Connect

Press the Menu button and scroll to the Spotify Connect function.

Listen with Spotify Connect

Connect your PIR-510 to your Wi-Fi network
Open up the Spotify app on your phone, tablet or laptop using the same wifi network
Play a song and select Devices available.
Select your PIR-510 and start listening.

Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how.

The Spotify software is subject to third party licenses found here:

www.Spotify.com/connect/third-party-licenses.

Note: The PIR-510 can be in standby state to use Spotify connect. When the PIR-510 is selected from within the spotify app, it will wake up automatically. But you have to be sure it is connected to the same wifi network as your smartphone/tablet or laptop.

FM Radio

Select ‘FM mode’ from the main menu by using the navigation wheel or press the navigation wheel to enter the FM radio mode. The FM mode will start on 87.5MHz.

To save all stations with strong signal, press the navigation wheel, it will show “auto scan?” choose YES. Then it will start auto scan. Once the auto-scan is complete, stations will be saved in your favorites.

You will then be able to browse through these saved stations by holding down the ‘<’ or ‘>’ buttons to skip between saved stations.

To manually scroll through FM frequency, simply press the ‘<’ or ‘>’ buttons to go backwards or forwards through the frequency wave.

Pre-setting your favourite FM stations

To save presets manually, select and listen to the station frequency number for the station you wish to save.

Press and hold the “FAV” button on the front panel for 1-2 secs and the number ’01′ will display on the screen. Use the navigation knob to browse through preset numbers (up to 99) and select the chosen preset number you wish to save it as by pressing the navigation wheel.

Recalling preset FM stations

View your favourite FM stations when you are on FM mode by simply short press the ‘FAV’ button on the front panel and begin scrolling through the saved stations.

Use the “<” and “>” keys for searching radio stations. Use the right rotation knob or the “<” and “>” keys for searching radio stations manually. One keypress is equal to 0,05MHz.
Press the scan button, the radio will now begin to scan for all of the available digital radio stations. Once the scanning process has completed the radio will tune to the first available radio station.

Remark about bad reception in FM

If you experience a bad reception in FM mode and your PIR-510 is connected to the Wifi and you have set up the LOCAL RADIO to your city, you can push 5 seconds on OK and the device will switch automatically your selected FM station to the same station through the internet radio.

DAB+ operation

Select ‘DAB/DAB+’ on the main display screen by turning the knob and pressing the navigation knob.

On first use of the DAB on your radio, your radio will begin scanning for DAB stations and will show’ Scanning’ on the display screen. It will display how many stations have been found as the search continues.

Once all of the available stations have been found, the screen will display the choice of available stations. Scroll through using the navigation knob to select the station you wish to listen to.

When you have selected a station, the screen will display the station and press navigation knob to play. To choose previous or next station, use the navigation knob to scroll accordingly.

To go back to the list to scroll through manually, select the ‘<‘ button to go back. To rescan your stations, go on the main list page for the DAB stations and there will be reminder ‘Delete station list?’. Choose ‘YES’ to do rescan.

When on your chosen station, select the ‘>’ button to show information on the station. The screen will automatically scroll through information and display genre, MHz, song playing, KHz and Kbps.

Pre-setting your favourite DAB/DAB+ stations

When you have found your desired station, hold down ‘Fav’ for a few seconds to go to the ‘Add to my Favorites’ screen. Turn the select dial to choose the preset number (up to 99) and select your option.

Alternatively, when you are on the list screen of DAB stations you are able to highlight the chose station and hold down ‘Fav’ to go to the ‘Add to my Favorites’ screen.

Recalling preset DAB/DAB+ stations

View your favourite DAB/DAB+ stations when you are on DAB mode by simply selecting the ‘Fav’ button and begin scrolling through saved stations.

Remark about bad reception in DAB mode

If you experience a bad reception in DAB mode and your PIR-510 is connected to the Wifi and you have set up the LOCAL RADIO to your city, you can push 5 seconds on the OK button and the device will switch automatically your selected DAB station to the same station through the internet radio.

Advise about use of Lenco PIR-510 battery:

When not connected to an external power adaptor, the internal battery will always use energy, even in standby mode. We advise to use the Standby-by position only when connected to an external power supply. When not connected, better power off the product with the power off selector at the side.

If you want to use the wake up/alarm function, we advise to do this only when the product is connected to the external power supply, otherwise the risk is that the battery goes empty at night and there will be no wake up in the morning.

13. Technical Specifications

Wifi Network (2.4Ghz only) 802.11b/g/n (WLAN) Encryption: WEP, WPA, WPA 2(PSK), WPS UPnP, DLNA Streaming
Supported filetypes WMA,MP3,
Connections DC, 3.5mm headphone out, USB port
Power consumption 5W (max)
Power consumption (standby) <1W
Operating Temperature 0°C-35°C
Operating position Horizontal
Battery: Lithium Ion 3.7V, 2200mAh
FM Radio: 87.5-108 MHz
DAB+ Radio: 174-239 MHz

Guarantee

Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.

Disclaimer

Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction, specifications and pictures in this documentation may differ slightly from your particular situation. All items described in this guide for illustration purposes only and may not apply to particular situation. No legal right or entitlements may be obtained from the description made in this manual.

Disposal of the Old Device

This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).

CE Marking

Hereby, Lenco Benelux B.V., Thermiekstraat 1a, 6361 HB Nuth, The Netherlands, declares that this product is in compliance with the essential EU directive requirements.
The declaration of conformity may be consulted via techdoc@commaxxgroup.com

Service

For more information and helpdesk support, please visit www.lenco.com

Lenco Benelux BV, Thermiekstraat 1a, 6361 HB Nuth, The Netherlands.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format) >>

Download This Manual (PDF format)

Download this manual >>