VANANCE MH-WF-9W Smart Light Bulbs 4Pack with Remote User Manual
- June 5, 2024
- VANANCE
Table of Contents
Smart LED Bulb
User Manual
Download the APP
Scan the QR code below to download the “Magic Home Pro” APP in APP Store or Google Play.
http://app.magichue.net/download/mgchomepro/AppDown.aspx
Install your smart light
Remove the bulb from its packaging and screw it into your light fixture. Then, turn it on.
Connect your light
- Turn on Bluetooth.
- Run the newest App “Magic Home Pro” and Register/ Login your Magic Home account.
- Click the “+” button on the top right corner and choose the bulb to which you want to connect. (If can’t found, reset your bulb)
- Connect the device to a Wi-Fi network. (Choose your router and log in your password, ensure the router is 2.4GHZ)
Parameters
5 Channels : RGB+CCT
Light Luminous Flux : 600LM/800LM
Color Temperature : 2700k-6500K
Working Temperature : -20-45°C
Power : 7W/9W/10W
Voltage : AC 100-240V, 50/60HZ /AC 100-130V, 50/60HZ / AC 190-240V, 50/60HZ
Lamp Socket: E26/E27/B22
Restore the factory setting
- Power on the bulb.
- Wait 3-5 seconds and then power off the bulb.
- At the end of the 4th time when you turn on the bulb, it will emit a strobe for a few seconds, after that it will become fully bright at which point the reset is complete. Once you have reset the bulb, you should be able to see its wifi IP
“Linet**” again under your mobile device’s wifi settings. (If not, please restart your wifi, wait for a while and you will see it).
FAQ
Scan the QR code below to read the electronic manual. Or open the APP’s menu bar of the APP and click the FAQ to learn more.
http://faqsys.magichue.net:8089/wifi/bulbRGBCW
Smart 2.4G remote controller
A. Pair the remote control:
After the lamp is powered on, press the power button for 5 seconds immediately
(within 3 seconds). When the lamp flashes slowly 3 times, it means the pairing
is successful.
B. Remove the remote control:
After the bulb is powered on, press the power button for 5 seconds immediately
(within 3 seconds). When the bulb flashes 3 times, it means the removal is
successful.
-
One-to-many control
The remote control can be paired with multiple WiFi bulbs at the same time and multiple WIFI bulbs can be controlled with one key without limitation.
Note: Please refer to the steps of pairing or removing the remote control -
Many-to-one control
A single WIFI bulb can be paired with multiple remote controls, and each remote control can control the same WiFi bulb separately. ( a single bulb can support up to 16 remote controls)
Note: Please refer to the steps of pairing or removing the remote control
How do I connect to Google Assistant?
Step 1: Creating your Magic Home cloud account. In order to control your smart light with the Google Assistant or control them remotely, you need to create a Magic Home cloud account and sign in.
Step 2: Add your light and
modify the name. Make sure there’s at least one smart light in the device list
and enabled your lights for remote control. On the “Home” page, long press on
the light you wish to rename.
Step 3: Add Home Control Action. Add device in Home Control of the Home
app. Select “Magic Home WiFi”.
Step 4: Log in with your app
account. Enter your app account and password to finish the account linking.
(Using your Magic Home cloud account you used in step 1). Your device should
be listed in the Home Control device list now.
Step 5: Control your light.
At this point, you’re all set up. You can now control your lights by issuing
voice commands.
Supported Commands: Say “Ok Google ” or “Hey Google”, then..
- Turn on
- Dim
- Brighten
- Set
to [50%] - Dim/Brighteln
by[50%] - Turn
[color] - Turn on/off all the lights
- Is
on ?
Changing colors on your lights
Color Options for Google Home control of your smart device:
• Blue
• Fuchsia
• Lavender
• Orange
• Salmon
• Turquoise| • Crimson
• Gold
• Lime
• Purple
• Sky Blue
• Violet| • Cyan
• Green
• Magenta
• Red
• Teal
• Yellow
---|---|---
For Scenes You can activate scenes by following voice commands:
Hey Google activates {scene name}
Hey Google turn on {scene name}
How do I connect to Alexa?
Step 1: Creating your Magic Home cloud account. In order to control your smart light with the Amazon Echo or control them remotely, you need to create a Magic Home cloud account and sign in.
Step 2: Add your light and
modify the name.
Make sure there’s at least one smart light in the device list and enabled your
lights for remote control. On the “Home” page, long press on the light you
wish to rename.
Step 3: Enable Alexa Skill.
The next step is to download the Amazon Alexa app. Open the Amazon Alexa app
and under the skills section, search for the “Magic Home” skill.
Step 4: Login and Discover
Devices.
Enable the skill and sign in using your Magic Home cloud account you used in
step 1.
The next step is to discover your smart lights from the Alexa app. You can say
“Alexa, discover devices”. Once Alexa has completed discovering your smart
lights, they will appear in the Smart Home section of the Alexa app.
Step 5: Control your light.
At this point, you’re all set up. You can now control your lights by issuing
voice commands.
Supported Commands:
These are some of the currently supported Alexa voice commands for the smart
light.
- Alexa, set [light name] to [0-100]%
- Alexa, turn [light name] on/off
- Alexa, dim/brighten [light name]
- Alexa, increase/decrease [light name]
- Alexa, set the [light name] light to red
- Alexa, change the [light name] to the color blue
For RGBW Light (Change to Warm White)
Alexa, set the [light name] to warm white
For CCT or RGBCW Light
(Change to Color temperature)
- Alexa, make the [light name] warm white
- Alexa, change the [light name] to the cool white
- Alexa set the [light name] to daylight
Changing colors on your lights
Color Options for Alexa control of your smart device:
• Blue
• Crimson
• Fuchsia
• Gold
• Lavender
• Lime
• Orange| • Pink
• Red
• Salmon
• Teal
• Turquoise
• Cyan| • Green
• Magenta
• Purple
• Sky Blue
• Violet
• Yellow
---|---|---
• Green
You can activate scenes by following voice commands: Alexa start {scene name}
Alexa turn on {scene name}
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>