YGHSZ S30WIFI WiFi Intelligent Solar Energy Alert PTZ Camera User Manual
- June 5, 2024
- YGHSZ
Table of Contents
YGHSZ S30WIFI WiFi Intelligent Solar Energy Alert PTZ Camera
Packing list
Product Diagram
Quick Setup
- Insert the USB cable of the solar panel to the “USB” Silicon Flap on the bracket base for battery charging
- Press the Power switch to turn ON/OFF the camera,
- Wait for the voice prompt step by step for pairing the camera with the APP.
- Note:
- Before you turn on the camera, please close the silicon flap to avoid rain leakage.
- Make sure your phone is connecting to the 2.4Ghz wifi firstly before you pairing the camera.
INSTALLATION
- Integrated installation
- Separated installation
APP INSTALLATION
Scan the following QR codes or seach for UBox from the App Store for ios devices) or Google Play Store (for Android smartphones) to download and install the app.
APP REGISTRATION
- 0pen the app then input your E-mail address then press ‘Register Check and select to agree the agreement then your E-mail bOx will get an verification code.( For better user’s experience, please allow to open all permissions to avoid missing any notifications from the app.)
- Input the “Verification code and press ‘Next. (if you not found the mail you might find the code in your email spam box. )
- Set the login password and confrim the login password.Then press ‘Register to next step.(For your password safety, the password requires more than 8 characters plus a combination of letters)
- Enter your E-mail address, and input your login password. Then press Login.
WI-FI CONNECTION
- Press ‘Add Family’ then set the room or position as per reminders.
- Enter your family name and then press ‘Next.
- Input the necessary information just like Country, Province, then press ‘Done’
- Press Add a device’ to add a smart device
- Connect the device with power supply, and make sure your mobile phone isconnected to an available Wi-Fi. Then press ‘Setup device’
- After the power on the device, wait for the blue LED and voice prompt The device is waiting for pairing, Which means your device is in pairing mode.
- If you did not hear the voice prompt, please press the RESET button until the blue indiIcator to lighup and then release. Ihe device will reboot and enter the pairing state.
- The app will input the Wi-Fi name automatically. please input the correct Wi-Fi Password. Then you can choose the ‘QR code configuration’ or Sound wave configuration.
- Sound wave configuration:Make sure camera and mobile phone within 1M distance,you will hear the wave sound DI DI,follow the tips showed in the mobile to finish the configuration.
- QR code configuration: Select the QR code configuration then the mobile phone display a QR code. Use the device to scan to the QR code 10cm away from the mobile phone
- Select the family name or device location then press ‘Done.’
- The device will enter to the device list automatically. Setup success! The device is readv to use
SPECIAL NOTES
- The device is equipped with a rechargeable lithium battery. The battery life will be affected by the device wake-up time and the number of wake-ups. Therefore, the PlR sensor alarm detection function is used in an environment with a lot of people. It is recommended to turn off or set the device to low sensitivity to reduce device wake-up and call times extend battery life. when the battery is low, please charge the battery immediately
- Keep the device in range of your router.Make sure the device is placed close to the Wi-Fi router. f there has to be thick or insulated objects between the device and the Wi-Fi router, which may lead to weak W-Fi signal, please make sure the Wi-Fi signal is in good level before you start using the device.
- It is a delicated device with low power consumption design. Everytime the device is awakened and will work for few seconds.After that, the device will enter standy mode to save power. You can set the work time in the app settings.
- 5ecause the mainland China does not receive Google sS system push messages, you need to open the app’s self-starting function in your phone to receive push messages.
- This device provides one month of free cloud storage services. If you need to continue using value-added services after the trial period expires, you need to purchase them in the app.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>