Abbott Cardiomems Patient Electronics System Instructions
- June 5, 2024
- Abbott
Table of Contents
Abbott Cardiomems Patient Electronics System
CARDIOMEMS™ PATIENT ELECTRONICS SYSTEM
Connectivity Methods (Wi-Fi™ and Telephone)
The electronics unit is equipped with a pre-installed USB cellular adapter. If
you do not have cellular coverage in your area, you can use Wi-Fi™ or landline
connectivity. Refer to the pages below for additional information.
Wi-Fi
-
While the electronics unit is powered off, insert the Wi-Fi™ adapter into either USB port on the rear of the unit.
Note: If your unit has a cellular adapter and Wi-Fi adapter plugged in, the unit attempts to connect to Wi-Fi first. -
Once powered on, the Wi-Fi setup screen will be displayed. Select the Configure button to start.
-
Select the Network button to find your home Wi-Fi network.
-
If your home Wi-Fi network is not at the top of the list, press the Next button until it moves to the top then press the Select button.
-
You will be prompted to enter your network password then select the Enter button.
-
The Wi-Fi connection screen will then display that it is connected to your home network. Select the Options button to continue.
LANDLINE TELEPHONE
Note: If your unit is connected to Wi-Fi, and you want to connect to a
landline telephone, remove the Wi-Fi adapter from the USB port.
- Lift up the pillow from the head rest to reveal the USB chamber.
- Disconnect the USB cable from the USB port. Leave the cellular adapter with the cable in the chamber.
- Return the pillow to its original position.
- If you have a Wi-Fi adapter connected in a USB port at the back, remove it and store it in a safe place.
- Insert one end of the telephone cord into the back of the electronics unit and insert the other end into a telephone jack in the wall. The provided phone splitter can be used if the telephone jack already has a phone line connected to it.
Abbott
One St. Jude Medical Dr., St. Paul, MN 55117 USA, Tel: 1 651 756 2000
Cardiovascular.Abbott/CardioMEMS
Rx Only
Brief Summary: Prior to using these devices, please review the
Instructions for Use for a complete listing of indications, contraindications,
warnings, precautions, potential adverse events and directions for use.
CardioMEMS™ HF System Indications and Usage: The CardioMEMS™ HF System is
indicated for wirelessly measuring and monitoring pulmonary artery (PA)
pressure and heart rate in New York Heart Association (NYHA) Class III heart
failure patients who have been hospitalized for heart failure in the previous
year. The hemodynamic data are used by physicians for heart failure management
and with the goal of reducing heart failure hospitalizations.
CardioMEMS™ HF System Contraindications: The CardioMEMS HF System is
contraindicated for patients with an inability to take dual antiplatelet or
anticoagulants for one-month post-implant.
CardioMEMS™ HF System Potential Adverse Events: Potential adverse events
associated with the implantation procedure include, but are not limited to,
the following: infection, arrhythmias, bleeding, hematoma, thrombus,
myocardial infarction, transient ischemic attack, stroke, death, and device
embolization. ™ Indicates a trademark of the Abbott group of companies. ‡
Indicates a third party trademark, which is the property of its respective
owner. © 2021 Abbott. All Rights Reserved. MAT-2100048 v1.0 | Item approved
for U.S. use only.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>