LIECTROUX T6S Robot Vacuum Cleaner Instruction Manual

LIECTROUX T6S Robot Vacuum Cleaner Instruction Manual

Welcome to use

Thank you for choosing the sweeping robots of Liectroux! Liectroux T6S is a smart robot integrating with sweeping, mopping and suctioning features. It can assist you to complete housekeeping work in a truly efficient and high-quality manner. It is featured with ultrahigh suction for dust collection, and is also equipped with multiple sensors and ultra-powerful obstacle navigation capability, and thus it can easily adapt to your distinct home environment. The robot can automatically recharge after cleaning without any human interference. You may use a remote controller to control different modes – automatic cleaning, scheduled cleaning, fixed-point cleaning and other cleaning modes, and set times and modes at any moment. Even if you are not home, it will clean your house without any difficulty and make your home healthy and clear.
Free yourself from trivial housework and enjoy your life from now on. Wish you be happy to use it!

Mobile APP Download

The product can be operated remotely via mobile APP, and please operate in accordance with the following instructions or by reference to the product guide described on the APP interface.

APP Download

Search “Tuya Smart” in Google Play Store or APP Store, or scan the following QR codes to download the Tuya Smart APP

Tips:

If the downloading fails, please try the following downloading approaches

1.  Log on www.tuya.com, and download the installation package .
2. Contact the customer-service personnel of the sweeping robot, and ask for the APP installation package
3.  Search the [Tuya Smart] in major mobile APP online stores, and directly download and install it.

• IOS APP
• Android APP
• Suggested distance: less than 4M
  

Mobile APP Network Interfacing Operation

1.  Ensure that the mobile is connected to an available WIFI network in your house, and the signal of the network shall
   be satisfactory.

2. Power on the product, hold the start key for 2S before a beeping sound and the voice of “Network Interfacing”, and then the network interfacing status is valid. Now please open your mobile APP for connection.

Tips:
If network interfacing fails, please restart the product and reinitiate the network interfacing procedure

1.  Log on and register your account of the mobile APP
   

2. Click “ensure the signal indicator is blinking”
   

3. The robot enters the network interfacing mode, and the signal indicator of network is blinking
   

4. Network interfacing success
   

5. Please operate through the APP
   

Safety Information

1. Please use the robot as described in the manual. Any inconsistent operation may lead to its damage.

2. Children below 8 years old or mentally handicapped persons are prohibited from using the product. If it is unavoidable, please make sure the operation is supervised and instructed by custodians. Please do not let your children ride on or play with the robot.

3. Please clear up any power cord or small object on the floor before using the robot in case they hinder the cleaning. Fold over the fringed hem of carpet and prevent curtain, tablecloth, etc. from touching the floor.

4. In case of elevated environment, e.g. stairs, please first test whether the product can detect the elevated area without falling off. Please provide protective fencing on the verge of the elevated area to prevent the product’s fall-off, and please also make sure that the fencing shall not cause personal injury due to stumble, etc.

5. Please ensure a supply voltage corresponding to the voltage marked on the charging base.

6. This product is an indoor household product, and please do not use it outdoors.

7. Only use the rechargeable battery and charging base that come with the robot. Do not use non-rechargeable batteries. For further specification, please refer to “Product Parameters”.

8. Do not rinse the product directly with water.

9. Do not wipe the product with any wetted cleaning cloth.

10. Do not use the product on any ground with ponding.

11. Do not use the robot with fire or fragile objects around.

12. Do not use the product in any environment of extreme temperatures (above 40℃ or below -5℃).

13. Keep the opening and running parts away from hair, clothes or finger.

14. Do not let the product be exposed to any flammable items, e.g. petroleum, toner of printer or copier, etc., and do not use the product to clean any area containing flammable materials.

15. Do not use the robot to pick up burning objects, including cigarette, match, ash or anything that is likely to cause fire.

16. Do not place any object at the suction port, and please clear the dust, cotton, hair and other foreign matters on the suction port in a timely manner to ensure unobstructed air flow.

17. Do not use a damaged charging base.

18. Do not pull or drag the product and the charging base by the power cord, use the power cord as handle, insert the power cord into door slots, pull the power cord from sharp corners or turnings, or allow the product running on the power cord. Simultaneously, make sure that the power cord is kept away from any heat source.

19. Do not use without dust box and filters in place.

20. If the power cord is damaged, it must be replaced by staff from manufacturer’s care service or any other professionals to avoid danger.

21. A proper connection between the charger and socket is necessary to avoid potential fire.

22. The power cord to the charger must be tightened to reduce the chance of electric shock, short circuit, smoking or fire.

23. Do not touch the power cord with a wet hand in case of electric shock.

24. Do not charge the product with any damaged power cord or power socket.
    Please do not use the product in the event where the product malfunctions due to fall-off, damage, outdoor operation or water penetration. In order to avoid damage, only the manufacturer or its after-sales service providers are authorized to repair the product.

25. Always remove the battery from your robot before long-term storage.

26. Always disconnect the robot from outlets and turn off power before cleaning and maintaining it.

27. Do not turn the robot to its side when mopping in case the PCPA plate is damaged due to an overflowing water tank.

28. Clean up in time the universal wheels and brush clogged with hair.

29. Always wipe up the water tank after filling it up. lease remove the waste in the dust box in a timely manner, in order to avoid vobstruction due to HEPA and vadverse effect on dust suction performance.

30. Before discarding the product, disconnect the robot from charging base, turn off power and remove the battery.
    Please remove and discard the battery in accordance with local laws and regulations.

31. Do not incinerate the product even with a severe damage since the battery might explode

Product Parameter

Robot

Power Adapter

Wireless Remote Controller

Product Introduction

Charging Base

Dust Box

Water Tank

Parts List

Charging base

Power adapter

Primary HEPA filter

Side brush

HEPA filter

Remote controller

Mop

Product Installation

Charging Base Installing

Place the charging base against the wall on the horizontal floor, and then connect it to the power source.

Tips:

1. Remove all barriers within 1m on its left and right and 2m at the front from the charging base.
2. The power cord on the floor may be dragged by the robot and lead to displacement or power failure of charging base.
3. The signal indicator on the charging base shall be on constantly.

Starting up and Charging

Press the start buttoon, and hold the start key. Then the robot will be automatically leaned on the charging base for power charging.

Tips:

1. If the robot is in low power and cannot be started on, please put the robot directly against the charging base.
2. When the adapter is charged, the robot doesn’t accept instructions from the remote controller and the key operations directed on the robot.

Installation of Side Brushes

Take out the side brushes from the packing box and press them into the mounting holes vigorously.

Charging Operation

Automatic Charging

Under the automatic cleaning mode, when the product is low in electric quantity, it will automatically search the charging base for power

Power Charging of Remote Controller

Press the recharge key on the remote controller in the selection mode, and the machine will automatically find the charging base for charging.

Tips:

1. When the key indicator is blinking in orange color, it indicates that power charging is ongoing; upon complete power charging, the key indicator lights up permanently in green color.
2. During daily use, please place the robot on the charging base and ensure that the charging base is connected to the power source.
3. If the product is not to be used for a long period, please fully charge the product, turn off the power switch, and store the product in a dry and well-ventilated place.
4. When setting the reservation mode, please do not activate the manual charging mode, while the automatic charging mode is recommended.

Manual Charging

Turn on the power switch on one side of the robot (1 indicates power-on, and 0 indicates power-off), the key indicator on the panel becomes blinking, then connect the power adapter to the power source, and plug the DC power output terminal to the product.

Product Operation

In order to adapt to different ground conditions and realize in-depth cleaning, the product is configured with multiple cleaning modes, which are optional from the remote controller

1. Use the remote controller to directly switch to any mode.
2. It is required to ensure that the robot’s start key is lighted permanently in green color, such that the robot is standby. If the robot is not awakened, quickly press the start key or start/pause key on the remote controller to awaken it.

Start Cleaning

The automatic cleaning mode can be started, by quickly pressing the robot’s start key or the start key on the remote controller.

Tips:
Before activating the modes, make sure that the start key on the robot is lighted permanently in green color, indicating that the robot is standby. If the robot is not awakened, quickly press the start key or start/pause key on the remote controller to awaken it.

Pause

Quickly press the start key on the robot or the start/pause key on the remote controller, and then the robot will pause.

Tips:
After standing by for 2 minutes, the robot enters the hibernation status, and then the signal indicator of start key will extinguish.

Cleaning Modes

Auto cleaning

On the remote controller, press the auto cleaning key, and the robot will perform automatic cleaning in the random cleaning mode by comprehensively analyzing the environment.

Max cleaning

If any area in the house is heavily accumulated with dust, please press the robust cleaning key on the remote controller, the robot will perform cleaning with intensified suction pressure.

Spot cleaning

If there is a “severe dusty area” in the house, which is in need of repeated cleaning, please press the spot cleaning key, and then the robot will perform intensified cleaning in a round trajectory.

Planned Cleaning

Press the cleaning key, and the robot will automatically enter a cleaning mode to perform cleaning in smart planned manner. After cleaning is finished, the robot will search the charging base for power charging or go back to the original point.

Scheduled Cleaning

Set the cleaning duration via the remote controller.
With successfully set reservation, the robot can perform automatic cleaning at the fixed time on a daily basis.

Edge cleaning

When encountering a wall, the robot will automatically enter the edge cleaning mode. Under the edge cleaning mode, the robot will operate along the side of the wall and will not ignore any corners.

Reservation Operation

In order for easy cleaning, the product is configured with the “Schedule” feature, and the user can send instructions to the robot via the remote controller. After the reservation, the robot will clean automatically every day according to the set time.

Operation:

1. Aim the remote controller at the robot to set reservation (make sure the power switch on the side is on).
2. Make sure the green light of the robot’s start key is on and the robot is now awakened. If the robot is not awakened, quickly press the start key or start/pause key on the remote controller to awaken it.

Fixed-time Reservation

1. Hold the reservation key for three seconds to set reservation.
2. Hold the reservation key for three seconds to cancel reservation.
3. Upon the reservation, the time after one hour is the scheduled cleaning time.

Tips:
If the power switch is off, the reservation will be cancelled. You need to reset the reservation.

Examples:
If you make the reservation at 8:00 a.m., the robot begins to enter the reservation mode and starts to work at 9:00 a.m. It will start working at 9:00 a.m. every day; if you power off, the reservation deems to be cancelled by default.

Operation of Remote Controller

1. Power button: press the key to make the machine enter the sleeping mode.
2. Home key: press the key to make the machine automatically return to the charging base for charging.
3. Edge cleaning key: press the key to enable the robot to perform cleaning around the surrounding of a fixed object. (e.g. a wall)
4. Spot cleaning key: press the key, and the robot will perform fixed-point cleaning in a “spiral” route.
5. Schedule key: press the reservation key for three seconds to enter the reservation mode.
6. Forward key: press the key to drive the machine forward in selection mode.
7. Backward key: press the key to drive the machine backward in selection mode.
8. Leftward key: press the key to drive the machine leftward in selection mode.
9. Rightward key: press the key to drive the machine rightward in selection mode.
10. Start/pause key: when the robot is in standby, press this key to activate cleaning; when the robot is operating, press this key to suspend cleaning; when the robot is hibernating, press this key to awaken the robot.
11. Waterflow control key: three levels of water volume can be optional by pressing the water volume adjustment key.
12. Suction adjustment key: three levels of cleaning suction can be optional by pressing the level adjustment key.
13. Auto cleaning key: press the key to make the machine enter random cleanig mode.
14. Planned cleaning key: press the key to make the machine enter smart planned cleaning mode.
    

Water Tank Operation

After cleaning, the dust box can be replaced with water tank assembly if mopping is required.

1. Paste the water seepage cloth
   Push through the two fixing corners of the water seepage cloth along the lower end of the duster cloth, paste the water seepage cloth securely, and mount the water seepage cloth bracket to the base of the robot in alignment.

2. Feed water
   Open the rubber plug of the water filling nozzle, slowly fill water into the water tank, and secure the rubber plug after the water tank is filled.

3. Install the tank assembly
   Open the middle cover of the robot, withdraw the dust box, and simply place the filled water tank into the empty slot.

4. Mop the floor
   Activate any cleaning mode on demand, and then the robot will perform the cleaning operation.

Tips:

1. During the robot’s mopping process, if the operation is suspended due to refill water or clean the duster cloth, the robot will replan the planned route upon restart, to re-clean the cleaned area. In order to achieve better cleaning performance, it is recommended to use the robot in a single room when mopping.
2. If a second room needs to be cleaned, it will be recommended to manually move the robot to the second room and refill the water tank or clean the duster cloth as appropriate.
3. If multiple rooms need to be cleaned, refer to the above Paragraph 2 before cleaning please.
4. Please do not use the water tank assembly on any blanket. Upon cleaning operation using the duster cloth feature, please fold the edge of the blanket to avoid that foreign matters on the duster cloth may pollute the blanket.
5. When cleaning, please pay attention to water filling or clearance timely, and open the tank plug during water filling.
6. When charging, please remove the water tank assembly.

Routine Maintenance

Dust Box Cleaning

1. Gently lift the finger position of the dust box cover.
2. The dust box cover will open. Hold the handle with hand and gently force it apart upwards.
3. Open the box cover.
4. Take out the filter screen.
5. Turn the dust box and pour out the garbage.

Tips:
Remove HEPA and relevant assemblies in the dust box, and use clear water to rinse the dust box.

Charging Base

Wipe the electrode slices of the charging base with the soft dry cloth.

Tips:
It suggests being cleaned every month.

Clean the Primary & HEPA Filters

1. The primary & HEPA filters may be cleaned with the electric blower or brush.
2. After cleaning the dust on the primary & HEPA filters, install the primary & HEPA filters into the dust box again.
3. Put the dust box back into the equipment.

Tips:
If the dust box is not installed or it is not installed in place, the garbage cannot enter the dust box.

Clean the Duster Cloth

Directly tear down the duster cloth from the duster cloth bracket, and clean it using daily detergents.

Tips:

1. It is recommended to replace the duster cloth every 3-6 months, in order to ensure sound cleaning performance.
2. If the duster cloth is not on the bracket, please do not mount the bracket onto the sweeper robot for cleaning, in order to avoid damaging the magic tape.

Routine Maintenance

1. Directly turn the machine up and pluck up the side brushes vigorously.
2. Remove and clean the side brushes.
3. Mount the side brushes back to the equipment after cleaning.
4. If the brush is deformed, please use hot water to restore it.

Tips:
The side brushes suggest being replaced every 3-6 months, to ensure the sweeping effect.

Battery Maintenance

The robot is internally installed with the high-performance lithium-ion charging battery pack. In order to maintain the battery performance, please maintain the robot in the charging state in daily use.

Tips:

1. If you do not use it for a long time, please shut it down and store it. Please charge it every three months at least, to prevent the battery from over discharge damage.
2. If any leakage of the battery occurs, please remove the battery and wipe the battery jar clean.
3. When the battery is in deep discharge or stays unused for a prolonged period, its capacity may be diminished, and it may need activation.

Activation approach:
Put the robot on the charging base manually, charge it for 3 minutes and remove it from the charging base, repeat this process three times, and then charge the robot for 3-5 hours as usual.

Cliff Sensor

Use a soft cleaning cloth to wipe the sensor to ensure sensitivity.

Cleaning of the nose wheel

1. Remove the nose wheels, clear any intertwined hairs around the nose wheel.
2. Put the nose wheel back to their original positions, and press them downwards in force to make them in place.

Tips:
It suggests being cleaned every month.

Alarm Prompt

the robot
2| Battery malfunction| Battery charging fault| Contact the manufacturer
3| Master, I am afraid of higher place. Please take or put me down gently| The robot is raised during operation| Put the robot back to the ground
4| Please check if the wheels are stuck| Wheel obstruction| Remove the foreign matters
5| Please check if the side brushes are stuck| Side brush obstruction| Remove the foreign matters
6| Blower malfunction| Foreign matters onto the fan| Contact the manufacturer
7| Please check if the front is stuck| Infrared bumper or nose wheel obstruction| Remove the foreign matters
8| Master, the floor is wet and please take me away| Wheel slip| Move the robot to another location and restartup

Frequently Asked Questions

the charging base before use; Ultralow (below 0℃) or ultrahigh (above 40℃) ambient temperature, Please use the product in the environment at 0-40℃.
2| Unable to charge| The charging base is not powered on. Please confirm whether both ends of the power cord of the charging base are well inserted or not; The connection is poor. Please clean the spring piece of the charging base and the charging wafer of the robot; Please confirm whether the signal indicator of the charging base is lit.
3| Unable to recharge| There are too many obstacles around the charging base. Please put  the charging base in the open area;

The robot is too far from the charging base. Please put it around the charging base.

4| Abnormal operation| Restart after it is powered off.
5| Noise when cleaning or robot trembling when traveling| The side brushes or universal wheels are intertwined with hair. Please clear it.
6| Abnormal dust suction performance| The suction port is blocked or the dust box is full.

Please check the suction port and clean the dust box garbage.

7| The fixed-time cleaning is inoperative| The battery is short of electricity. When the remaining electricity is more than20%, the fixed-time cleaning will be started.
8| Remote controller malfunction| The remote controller battery is short of electricity. Please replace the battery with correctly installed new battery; Ensure the robot’s power switch is on and the battery’s electric quantity is sufficient to complete the expected operation; Use a clean cotton cloth to wipe the infrared transmitter of the robot’s remote controller and IR receiver; Please avoid using the remote controller near other

infrared equipment.

9| The robot keeps reversing| The cliff sensor malfunctions. Please clean the surface of the cliff sensor.

Hazardous Substances

Component Category

| Hazardous Substances
---|---
Pb and its compounds| Hg and its compounds| Cd and its compounds| CrVi and its compounds| PBB| PBDE
Plastic Parts| o| o| o| o| o| o
Hardware(Alloy)| o| o| o| o| o| o
Main Equipment Circuit Module| o| o| o| o| o| o
Battery| o| o| o| o| o| o
Power Cord (Metal)| o| o| o| o| o| o
O: Indicates that the content of this hazardous substance in all the homogeneous materials of this component is below the limit prescribed in GB/T26572.

X: Indicates that the content of the hazardous substance in at least one of the homogeneous materials of the component exceeds the limit specified in GB/T26572, and there is no mature alternative in the industry, which meets the environmental protection requirements of the EU RoHs directive.

The numbers in this mark indicate that the product’s environmental use term under normal use is 10 years.

Implementation of Standards

GB4706.1-2005 GB4706.7-2014
GB4343.1-2009 GB-17625.1-2012

Product Warranty

Thank you for choosing the product. From the date of your purchase within one year, the product is covered by the warranty period.

Within the warranty period, free maintenance and repair services will be available in accordance with the provisions of the warranty policy if the product malfunctions due to defects arising from original components of the product or transportation, provided that the product is installed as per the manual and used in the normal environment and conditions. Please keep proper custody of this warranty card as the warranty certificate, which will not be reissued if it is lost.

Maintenance and repair services at a price can be offered in case of the following circumstances:

1. Product damage arising from product installation non-conforming to the requirements, standards and specifications in relation to the product.
2. Product damage arising from relevant components in the installation environment non-conforming to the requirements, standards and specifications in relation to the product.
3. Product damage arising from the user’s misuse, poor custody, arbitrary dismantling or repair of the product, etc.
4. Product damage arising from natural disasters (e.g. earthquake, flood and lightning) and external disasters (e.g. fire, house collapse), etc.
5. Failure or damage arising from installation location change, relocation, transportation, poor custody, etc.
6. Beyond the warranty period.

“CE” marking states that the product is compliant to European Directives 2006/95/CE Low Voltage Directive 2004/108/EC EMC Directive It is possible to request a full copy of Declaration of compliance to the Distributor: This product complies with the rules of RoHS Directive(2002/95/CE) This product complies with the rules of Eup Directive(2009/1255/CE)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>