Hot Pepper Ghost Smartphone User Guide
- June 5, 2024
- Hot Pepper
Table of Contents
Hot Pepper Ghost Smartphone
Knowing Your Phone
Home Screen
The Basic Applications
- Phone Calls: Tap to open the dial pad to make a call.
- Messages: Tap to send and receive text messages.
- Internet: tap to surf the internet on Google Chrome.
- Connect to Wi-Fi: Enter Settings > Network & Internet > Wi-Fi.
- Settings: Tap to configure various phone features and setting
- My Phone Number: Tap and then tap on System > About phone to find your phone number.
FCC Regulations
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment. The
antenna(s) used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: 1) Reorient or relocate
the receiving antenna. 2) Increase the separation between the equipment and
receiver. 3) Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. 4) Consult the dealer or an
experienced radio/TV technician for help.
Radio Frequency (RF) Energy
This phone is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the United States. During SAR(Specific Absorption Rate)
testing, this device was set to transmit at its highest certified power level
in all tested frequency bands, and placed in positions that simulate RF
exposure in usage against the head with no separation, and near the body with
the separation of 10 mm. Although the SAR is determined at the highest
certified power level, the actual SAR level of the device while operating can
be well below the maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power required to reach
the network. In general, the closer you are to a wireless base station
antenna, the lower the power output. The exposure standard for wireless
devices employing a unit of measurement is known as the Specific Absorption
Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are
conducted using standard operating positions accepted by the FCC with the
device transmitting at its highest certified power level in all tested
frequency bands. The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance with the FCC RF
exposure guidelines. SAR information on this model phone is on filewith the
FCC and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC ID: 2APD4-A81C. For this
device, the highest reported SAR value for usage against the head is
0.686W/kg, for usage near the body is 0.869W/kg, and for simultaneous
transmission is 1.034W/kg.
While there may be differences between the SAR levels of various phones and at
various positions, they all meet the government requirements. SAR compliance
for body-worn operation is based on a separation distance of 10 mm between the
unit and the human body. Carry this device at least 10 mm away from your body
to ensure RF exposure level compliant or lower to the reported level. To
support body-worn operation, choose the belt clips or holsters, which do not
contain metallic components, to maintain a separation of 10 mm between this
device and your body. RF exposure compliance with any body-worn accessory,
which contains metal, was not tested and certified, and using such body-worn
accessory should be avoided.
HAC Regulations
The EUT was tested and rated under the American National Standard Institute (ANSI) C63.19-2011 hearing aid compatibility（HAC） standards. The ANSI standard for hearing aid compatibility contains two types of ratings:
- M-Ratings: Rating for less radio frequency interference to enable acoustic coupling with hearing aids.
- T-Ratings: Rating for inductive coupling with hearing aids in telecoil mode. This device complies with the FCC HAC requirements has also been tested E-Field, H-Field and T-Coil, the worst test result of M rating is M4, the T rating is T3.
- M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than phones that are not rated. M4 is the better/higher of the two ratings. Your device is rated M4.
- T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing aid’s telecoil than phones that are not rated. T4 is the better/higher of the two ratings. Your device is rated T3.
More Information
- General support are available at www.hotpeppermobile.com or
- Call Hot Pepper hotline at 1 855-737-7377 (1-855-PEPPERS)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>