BANG OLUFSEN Beosound Emerge Wireless Bookself Speaker Instructions
- June 5, 2024
- bang olufsen
Table of Contents
BANG OLUFSEN Beosound Emerge Wireless Bookself Speaker
Important safety instructions
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use these apparatus near water.
- Clean only with dry cloth .
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any h eat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use at tachments/a accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qua li ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- WARNING: To reduce the risk of re or electric shock, do not expose this appliance to rain or moisture.
- Do not expose this equipment to dripping or splashing and ensure that no objects FIlled with liquids, such as vases, are placed on the equipment
- To prevent electric shock hazards, do not connect to mains power supply while the grille is removed.
- Hereby, Bang & Olufsen A/S declares that the radio equipment type Beosound Emerge is in compliance with Directive 2014/53/EU. The full Declaration of Conformity can be found at the following web site: https://www.bang-olufsen.com/support/beosoundemerge
Important!
- Avoid placing the product in direct sunlight or direct light, such as a spotlight.
- Make sure that the product is set up, placed, and connected in accordance with the instructions.
- Place your product on a surface or stand where you want it placed permanently. Use Bang & Olufsen-approved stands and wall brackets only!
- Do not place any items on top of your product.
- Do not subject the product to high humidity, rain or sources of heat.
- The product is intended for indoor use in dry, domestic environments only. Use within a temperature range of 10– 40°C (50–105°F).
- Leave enough space around the product for adequate ventilation.
- Do not connect any of th e products i n your system to the mains until you have connected all the cables.
- Do not attempt to open the product. Leave such operations to service personnel.
- The product can only be switched completely by disconnecting it from the wall socket.
- The supplied plug and main cord are specially designed for the product. Do not change the plug and if the main cord is damaged,you must buy a new one from your Bang & Olufsen retailer.
- Using a very noisy AC supply may trigger false touch operations in very rare situations. The supplied USB-C PD adapter is specially designed for the product. Do not change the adapter, and if the adapter is damaged, you must buy a new one from your Bang & Olufsen retailer.
CAUTION
- To prevent electric shock hazards, do not connect to mains power supply while the grille is removed
- Compliance with 2014/53/EU Radio Equipment Directive (RED)
- In accordance with Articles 10.8(a) and 10.8(b) of the RED, the following table provides information on the frequency bands used and the maximum RF transmit power of the product for sale in the EU:The product firmware is
- available for download from the Bang & Olufsen App.
- The product to be sold in all European Union members and EFTA countries.
Fcc statement
This device complies wit h Part 15 of t he FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.• Changes or not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RADIATION EXPOSURE STATEMENT
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with a minimum distance 20cm between the radiator & your body. CAN ICES-3 (B)/NMB-3(B)
IC warning
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device
- This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment