Litheli 40V 2.5AH Lithium Ion Battery Pack Instruction Manual

: June 5, 2024
: Litheli

Table of Contents

CHARACTERISTICS
BATTERY-SAFETY RULES
RULES OF USE FOR YOUR BATTERY
SYMBOLS
USE OF YOUR BATTERY
RECYCLE THE BATTERY
CONFORMITY
TECHNICAL SPECIFICATIONS
Warranty
Customer Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Litheli 40V 2.5AH Lithium Ion Battery Pack Instruction Manual

CHARACTERISTICS

Battery	U1BY2O11O
Voltage	4OV
Amperage	2.5AH
Type	LITHIUM -ION
Charger Output Rating	36VDC / 4.2A 3.OA 2.OA 2.4A

Product overview

BATTERY-SAFETY RULES

Battery-powered devices do not need to be connected to the mains, so they are always in working order. Be aware of the risks associated with the device, even when it is not in use.

Remove the battery before adjusting, cleaning or removing any foreign matter from the unit.
A battery pack can only be recharged with the charger recommended by the manufacturer. Using a charger with an incompatible battery pack may result in a fire hazard.
Use the battery only with the specified charger
Use only the battery pack specifically designed for the machine
Using any other battery pack may cause fire, electric shock or serious injury
When the battery pack is not in use, keep it away from other metal objects such as paper clips, coins, keys, nails, screws, or other small objects that may short circuit the charger terminals. Short-circuiting the charging port terminals could cause sparks, burns or fire.
Do not place battery-powered devices or their batteries near fire or heat sources. This will reduce the risk of explosion and injury.
Do not open or attempt to disassemble the battery.
Electrolyte leaks are corrosive and can cause damage to the eyes or skin. The electrolyte is very toxic and is very dangerous if ingested. If electrolyte comes into contact with your skin or eyes, wash them immediately with plenty of water and contact your doctor as soon as possible
Do not short-circuit the battery pack. There would be a risk of explosion
Protect the battery pack from moisture and water; do not charge this battery in a wet or humid environment. This will reduce the risk of electric shock.
If the battery is damaged or used improperly, vapors may be emitted. Ventilate the area immediately and contact a doctor in case of respiratory problems. Vapours are very irritating.
Do not leave the battery in the rain or in the sun, in a car during the summer for example.
Do not place the battery in regular household waste
Do not incinerate the battery
Dispose of the battery in an approved waste facility or recycling centre.

RULES OF USE FOR YOUR BATTERY

To ensure that the life of your battery is as long as possible, here are our tips:

Remove the battery from the charger when it is fully charged and ready for use.

For the storage of battery packs longer than 30 days:

Store the battery where the temperature is below 26°C and away from moisture.
Store the battery at 30% – 50% of its charge.
Every two months, recharge the battery to 30% – 50% of its capacity.

Recharge the battery when the device is running too slowly or stops. The battery can be charged at any time without shortening its life. The interruption of charging does not damage the battery.

SYMBOLS

Battery

The symbols below are aNixed to your product. Please study and learn their meaning. A better interpretation of these symbols will allow you to operate the product in the safest way

| WARNING marking concerning Risk of Explosion.

Do not puncture, short, or open battery packs and do not charge damaged battery packs.

---|---
| WARNING marking concerning Risk of Fire. Do not cover Charger ventilation ducts.
Charge on fireproof surface only.
| Never throw the rechargeable battery into water.
| Risk of explosion! Never throw batteries onto a fire.

| Rechargeable battery contains lithium! Do not dispose of in trash bin!

Discharge the rechargeable battery by operating the tool at idle until the motor stops.
Take the rechargeable battery out of the tool.

| Do not expose batteries to temperatures above 45°C.
| Dispose of the batteries at a collection point for old batteries, from where they are taken to environmentally friendly recycling.

| If you do not adhere to the instructions and safety measures described in the Operating Instructions severe injuries may occur. Read the Operating Instructions before you start and operate this device.
---|---

| Items should be moisture proof preserved.

| WARNING SYMBOL

Indicates danger, safety notes or causes for particular caution. This symbol may occur in combination with other symbols or pictograms.

| Charge level indication.

USE OF YOUR BATTERY

BATTERY LI-ION
Lithium-ion batteries deliver uninterrupted power throughout their operating life. The power of your 40V devices will not decrease during use, while the battery charge will decrease. However, the battery will stop supplying power to your device when the battery is discharged. It will then be necessary to recharge the battery. It is not necessary to completely discharge the battery before charging it, this is the advantage of Li-Ion batteries.

BATTERY PROTECTION Our 40V batteries are designed to maximize their lifespan and protect their cells. If the unit stops during use, release the start trigger and attempt to operate the unit again. If it still doesn’t work, then you have to recharge the battery.

COLD WEATHER USE
Li-lon batteries can be used at temperatures down to -20°C. Switch on the battery in the tool, and use it during the day, with good lighting. After a good minute, the battery will have warmed up and will be operational.

RECHARGE THE BATTERY
Your battery is delivered charged to the minimum to avoid any problems during transport. First of all, it is imperative to fully recharge it once. If the battery does not charge, upon receipt, you should contact your Litheli service representative, and we will give you instructions for replacement if necessary. To recharge your battery, it is imperative to use a compatible charger, recommended by Litheli. If everything has been checked, you can connect the charger to the mains socket. Insert the battery into the charger and check that it is engaged. The battery may become hot to the touch during charging. This phenomenon is quite normal. Do not place the charger and battery in places that are too hot or too cold. They will work much better in a room with a suitable ambient temperature (at home). Once the battery is charged, remove the power plug and you can disconnect the battery.

RECHARGING A BATTERY WHEN IT IS HOT
When you use a tool continuously, the battery can become hot. You can place your battery on the charger, but it will not charge until the temperature has reached an optimal level. Once the temperature has reached its optimal level, the battery will start its charging cycle automatically.

RECHARGING A COLD BATTERY
A battery that is too cold can be inserted into the charger, but charging will not start until the battery reaches the optimal temperature. When the battery is warm, the charge will start automatically.

REMINDER OF THE RULES FOR USING YOUR BATTERY
To ensure that the life of your battery is as long as possible, here are our tips: Remove the battery from the charger when it is fully charged and ready for use. For the storage of battery packs longer than 30 days:

Store the battery where the temperature is below 26°C and away from moisture.
Store the battery at 30% – 50% of its charge.
Every two months, recharge the battery to 30%- 50% of its capacity.

BEHAVIOR OF THE LEDS ON THE BATTERY

LED status	Charging level
Charging level too low
Between 5% and 50%.
Between 50% and 80%.
More than 80%.

RECYCLE THE BATTERY

The battery components contain toxic and corrosive elements, and should not be disposed of in the wild or with your household waste. To avoid any risk to the environment, here is the procedure to follow when disposing of your battery.

Cover the battery terminals with adhesive tape.
Do not attempt to disassemble or access battery components
If a liquid leak is found, be aware that it is corrosive and toxic, so it is advisable to handle the battery with care (gloves).
Do not place the battery in regular household waste.
Do not incinerate the battery.
Dispose of batteries in an approved waste facility or recycling centre.

CONFORMITY

EC Declaration of Conformity
We hereby declare THAT THE DEVICE DESCRIBED BELOW, IN VIEW OF ITS DESIGN AND CONSTRUCTION, AS WELL AS IN THE CONFIGURATION WE HAVE PUT INTO SERVICE, COMPLIES WITH THE BASIC HEALTH AND SAFETY REQUIREMENTS OF THE RELEVANT DIRECTIVES. THIS DECLARATION IS INVALID IF THE DEVICE IS MODIFIED WITHOUT PRIOR AGREEMENT WITH US.

TECHNICAL SPECIFICATIONS

Battery reference U1BY20110
Voltage 40V Li-Ion
Capacity 2.5AH
Battery power 9OWh
Weight 0.76kg

Warranty

90- Day Money Back
You May Return Your Product for A Full Refund Within The First 90 Days of Your Purchase.

1+2 Year Battery and Charger Warranty
1 Year of standard warranty + 2 Years of extended warranty available with product registration. Against Defects in Workmanship and Materials. Battery and Charger Must Be Used and Maintained in Accordance with The Manual of The Operator’s Instructions and Regulations.

3+2 Year Tool Warranty
3 Years of standard warranty + 2 Years of extended warranty available with product registration. Against Defects in Materials, Parts or Workmanship.
Litheli at Its Own Discretion Will Repair or Replace Any and All Parts Found To Be Defective. All Units Must Be Used and Maintained in Accordance with The Directions and Regulations in The Operator’s Manual.

Returning The Product
Contact Us at www.IitheIi.com for The Return Address, We Will Issue Replace/Refund Upon Receiving Your Return.

Need An Extra Copy of The Operator’s Manual? Visit www.IitheIi.com to Download it.

LIST OF WARRANTY EXCLUSIONS

Damage, breakdowns, failures or defects due to external causes,
Failures resulting from changes in the construction and original characteristics of the device,
Breakdowns affecting parts that do not comply with those recommended by the manufacturer,
The settings accessible to the beneficiary without disassembling the device,
The costs of commissioning, adjustment, cleaning and tests not resulting from guaranteed damage,
Failure to comply with the manufacturer’s instructions,
Repairs and damages suffered by the device after a repair carried out by anyone other than a repairer of our workshops, or without our prior agreement,
Temporary repairs as well as the consequences of any aggravation of the resulting damage,
Damage due to corrosion, oxidation, improper connection,
The replacement of missing / damaged parts upon receipt, not indicated on the delivery note,
Replacement of worn parts.