Puig YAMAHA MT-09 ’21 Pro Frame Sliders Installation Guide
- June 3, 2024
- Puig
Table of Contents
Puig YAMAHA MT-09 ’21 Pro Frame Sliders Installation Guide
INSTRUCTIONS TO ASSEMBLE
Remove the fasteners that subject the chassis to the engine. Mount the
protectors on each own side as the figure below shows. Tight the set, and
place the caps.
All the screws replaced, should be tightened to the torque specified in the
oem maintenance manual for your motorcycle. if no torque specifications are
provided in the oem maintenance manual, may be used 54Nm for all M10 screws.
Medium strength liquid thread-locker (i.e. “Loctite”) should be used to secure
all screws, bolts and nuts. All screws, bolts and nuts should be checked after
driving the first 50 km to ensure that all are tightened to the proper torque.
FOR TO ASSEMBLE THE CRASH PADS, IF YOU ARE NOT A TRAINED MECHANIC, PLEASE CONTACT A SPECIALIST. MOTOPLASTIC, S.A. TAKES NO RESPONSIBILITY FOR DAMAGES CAUSED BY IMPROPER INSTALLATION. THE USE OF CRASH PADS DO NOT GUARANTEE A FULL PROTECTION IN CASE OF ACCIDENT. MOTOPLASTIC-PUIG DECLINE ANY RESPONSIBILITY IN CASE OF MOTORCYCLE DAMAGE.
Accessory verified in the basic configuration of the motorcycle. For models with extra factory settings. We cannot assure its compatibility, except for prior consultation. We decline any eventual claim.
| ID. | DESCRIPTION | QTY. | REF.: |
|---|---|---|---|
| 1 | Covers set | 2 | TAPAPROPATIN— |
| 2 | M10/150x 80 DIN912 screw | 1 | M2TM10150080A9B |
| 3 | M10/150 x 120 DIN912 screw | 1 | TORNIAD912-0353 |
| 4 | M10 DIN125/A washer | 4 | M2AM10DIN125AZB |
| 5 | Nylon Protector | 2 | PROT.PRO |
| 6 | Right spacer (38mm) | 1 | CASPAT22 C/NEGRE |
| 7 | Left spacer (75mm) | 1 | CASPAT26 C/NEGRE |
| 8 | Right platen | 1 | PLATI399 C/NEGRE |
| 9 | Left platen | 1 | PLATI400 C/NEGRE |
| 10 | M10/125×80 DIN912 screw | 2 | TORNIAD912-0338 |
| 11 | M10/125×50 DIN912 screw | 1 | TORNIAD912-0335 |
| 12 | M10/125×30 DIN912 screw | 1 | M2TM10125030A9B |
| 13 | M10 cap | 4 | TAPA–CHC10800E |
| 14 | Ø24X18 right black spacer | 2 | CASQU271 C/NEGRE |
| 15 | Ø20X19 left black spacer | 1 | CASQU480 C/NEGRE |
| 16 | M10 DIN6923 nut | 2 | TUERCAD6923M10Z |
MOUNTING INSTRUCTIONS
QR code
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>