Wireless Earbuds Bluetooth Headphones 48hrs Play Back Sport Earphones-Complete Features/User Manual

June 5, 2024
bmanl

 bmanl

Wireless Earbuds Bluetooth Headphones 48hrs Play Back Sport Earphones

Wireless-Earbuds-Bluetooth-Headphones-48hrs-Play-Back-Sport-Earphones-
img

Specifications

  • BLUETOOTH VERSION: BT5.0+EDR
  • SUPPORTS: HSP/HFP/A2DP/AVRCP
  • CHARGING INTERFACE: Point-Contact
  • CHARGING PORT: Type-C
  • BATTERY CAPACITY: (Li-ion battery inside)
  • EARBUD: 50mAh
  • CHARGING CASE: 600mAh
  • BATTERY LIFE: Twin Earbuds will last 8 hours on single full charge (Actual battery life changes with the song types and volume requirements)
  • STANDBY TIME: Up to 100 hours
  • CHARGING TIME: 1-1.5 Hrs for earbuds / 2Hrs for charging case
  • TRANSMISSION RANGE: 33 feet (with no obstacle)
  • EARBUD WEIGHT/SIZE: 0.28 oz/PC
  • CHARGING CASE WEIGHT/SIZE: 2.19 oz/PC

Introduction

Wireless earphones with an LED display make it easy to see the case and earbuds’ battery life. To the left of the Bluetooth headphones, a percentage of the remaining power is displayed on the screen. The right side is devoted to the charging process of each bud; there are four different power consumption gauges, each representing 25% of the bud’s power. The LED indicator light will blink when charging. Bluetooth earbuds use Bluetooth chip technology to provide a crisp and seamless connection, allowing you to hear crystal clear calls as if you were speaking face to face. Don’t be concerned about interruptions while listening to music or making phone calls.

When compared to touch control, button control is simple, allowing you to avoid any processes and not having to recall the instructions. When you take the wireless earphones out of the charging case, they’ll connect to the previously paired device automatically. The range can extend up to 33 feet. When you replace it, the Bluetooth earphones turn off and begin charging. Sport headphones with a snug fit that won’t shift or fall out during long hours of exercise and no cables to stifle your progress. Three pairs of ear caps and flexible ear hooks are included, allowing them to stay on your ears and provide a secure fit. So that you do not become fatigued or in pain after wearing it for an extended period of time.

PRODUCT OVERVIEW

WHAT’S IN THE BOX

HOW TO PAIR TWO HEADPHONES WITH MY PHONE

STEP 1

Take both headphones out of the charging case, the twin Earbuds will power on and pair with each other automatically. [If the earbuds are not connected to your device over 3 minutes, the earbuds will power off automatically. Turn on the headphones manually by pressing down the MFB for about 3 seconds at the prompt “Power on” and one beep sound.] “R” earbuds alternate flash red-blue light and “L” earbuds flash blue light means TWS pairing is done.

STEP 2
Activate Bluetooth setting on your phone, search and choose “VEATOOL T16″ to connect. [There should be voice prompt “connected” if you wear the earbuds.] Earbuds’ indicator lights off means already connect with mobile.

Wireless-Earbuds-Bluetooth-Headphones-48hrs-Play-Back-Sport-Earphones-
fig-4

Tips

  1. if there is any issue with pairing both earbuds to your phone, please put the earbuds back into the charging case and repeat the above steps.
  2. These earbuds not only can be used together but also can be used individually. If you want to use single-mode, just take one earbud Out Of the case and connect to your phone, it will be OK. Or when you are using Dual mode. turn off one earbud manually or put one earbud back into the charging case, you will be able to hang on to the other one by single mode.

**HOW TO WEAR THE EARBUDS CORRECTLY?**

  •   Take out “R earbud” to wear on the right ear.

HOW TO PLACE HEADPHONE

FUNCTIONS

For call

For music

CHARGING

EARBUDS CHARGING

Earbuds start to charge only when you put the earbuds into the charging slot the right way. (You can charge the charging case and earbuds at the same time, or you can charge charging case first and then to charge the earbuds.

  • When being charged, the Earbuds’ LED light will illuminate red.
  • When fully charged, the charging case will automatically stop charging and the earbuds’ LED Red light will go off.

CHARGING CASE CHARGING

There is a Type-C USB charging cable in the package, please use it to charge the case directly. During Charing, the digital display will be flashing and display the battery in real-time. After a full charge, the number is displayed as 100.

CHARGING WARNING

  1. After using a period of time, the earbuds don’t charge or even can’t turn on because of the oxidized magnet connector. You can handle this problem by using an alcohol rag to clean the magnet connector on the earbuds and charging case.
  2. Earbuds can automatically turn off immediately, meanwhile, start charging when you put them back into the charging case. Also, will automatically turn on and pair when picking it up.

STORAGE AND MAINTENANCE

  1. If the earbuds have been unused for more than 3 months, we recommend that you charge them.
  2. Please use chargers that are FCC (Federal Communications Commission) approved.
  3. Do not disassemble Earbuds.
  4. adult supervision is required for children aged 6 and under.
  5. DO not expose the earbuds to high or low temperatures, do not use the earbuds in a thunderstorm storm Avoid falling or violent impact of the device. Keep the device away from fire, do not put the device in water.
  6. Do not use Oil or any volatile liquid to clean this product.

Frequently Asked Questions

  • Why these earbuds cannot pair with my mobile phones?
    Please make sure the earbuds are fully charged and powered on.
    Please make sure the Bluetooth of your phone is turned on.
    If the above 2 points have no problem, please put earbuds into the case again and close the case, hold on for 1 min, then open the charging case and reconnect the earbuds with your phone.

  • Why does the music cut in or cut out?
    First, please do not let the distance between these earbuds and your phone more than 33 feet (without Obstacle).
    If the distance is less than 33 feet, please take steps as follows:
    Put earbuds back into the case and close the case, forget “VEATOOL T16” on your phone
    After 10s later, open the case and reconnect these earbuds with your phone

  • When on a phone call, can I hear a voice in both Earbuds?
    Yes. you can hear the voice in both earbuds when both earbuds are paired and connected to the same mobile phone.

  • Are these earbuds sweatproof and waterproof?
    These earbuds are IPX5, it is sweatproof, and slightly waterproof. As for the electronic products, we do not suggest soaking the earbuds in the water.

  • When my wireless earphones are fully charged, how do I know?
    When your earbuds are plugged in and charging, the charging case will blink red. The LED will stop flashing and become solid red once fully charged.

  • My Bluetooth headphones aren’t connecting to my phone.
    If your Bluetooth devices won’t pair, it’s probably because they’re out of range or not in pairing mode. Try rebooting your devices or having your phone or tablet “forget” the connection if you’re encountering persistent Bluetooth connection issues.

  • What is the best way to see if my Bluetooth headphones are charging?
    When the battery is charging, the indicator light will turn on. The light may take up to one minute to turn on. 3. The indicator light will turn off when the headset’s battery is fully charged (approximately 2-3 hours).

  • What does the blue light on earbuds indicate?
    A healthy connection can be shown by a constant blinking blue light. The headphones may be in pairing mode if they have a slow pulsing blue light. Blinking red and blue is the most popular light pattern for pairing mode.

  • How long do earbuds take to charge?
    Bluetooth headphones typically take 2-3 hours to completely charge and have 22-hour battery life. The average Bluetooth earphones take 1.5-2 hours to fully charge and have a battery life of 5 hours for the earbuds and 24 hours for the charging case.

  • Why are my wireless earbuds only working on one side?
    Depending on your audio settings, headphones may only play in one ear. Check your audio properties to make sure the mono option is disabled. Also, make sure that the voice levels on both earphones are equal.

file:///C:/Users/Desk%20Zone/Desktop/uswah%2028%20may/Bmanl/a2b9fa6179f5985a90ad93c720b3f02100a52aebc4098a3a82a3275782ed4a84.pdf

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals