Fringe sport V2 DOUBLE WALL BALL TARGET User Guide
- June 5, 2024
- Fringe sport
Table of Contents
WALL BALL TARGET V2 DOUBLE
TOOLS NEEDED: #17 Wrench 5/8” Hardware
V2 DOUBLE WALL BALL TARGET
-
SLIDE CARRIAGE BOLT THROUGH THE PLATE AND POST. SLIDE THE NUT THROUGH THE POST. LIGHTLY SCREW THE NUT ONTO THE CARRIAGE BOLT
-
TURN THE PLATE FLAT ON THE GROUND AND TIGHTEN THE LOWER CARRIAGE BOLT NUT FIRST.
-
TURN THE POT ON ITS SIDE, PRESS ON THE HEAD OF THE CARRIAGE BOLT, AND TIGHTEN THE NUT.
-
MATCH UP THE SQUARE HOLES, SLIDE THE CARRIAGE BOLTS THROUGH THE SQUARE HOLES AND TIGHTEN THE NUTS FROM BEHIND.
-
SLIDE THE BOLT THOUGH UPRIGHT THROUGH THE UPRIGHT AND THE NUTS THE POST AND TIGHTEN.
Read User Manual Online (PDF format)
Loading......