MOSWS ET24 Portable Speaker User Manual
- June 5, 2024
- MOSWS
Table of Contents
MOSWS ET24 Portable Speaker
Technical specifications
- Wireless version: 5.0
- Transmission distance: 10m
- Output power: 10W*2
- Frequency effect: 100Hz~10KHz
- Speaker: 52mm*2,40Q10W
- Input power: 5V-1A
- Maximum current consumption: 1A
- Audio signal input connector: Standard 3.5mm earphone
- jack (stereophonic)
**Button Instructions
**
- Mode key Short presS: switch function, long press: pair two speakers.
- Previous song
- Power button: press on/off, about 3 seconds/time.
- Play/Pause button Short press: play/pause; Double press: call-back(wireless mode) Short press: connect/hang up(call mode) Press 2 seconds: reject(call mode) Long press: exit wireless connection
- Next song
- AUX jack
- USB interface
- Type-C charging
- TF card jack
- Volume+
- Volume
Detailed Instructions for Use
Wireless Pairing
- Before using wireless pairing, please turn on the Bobtot-Sound Air3 speaker first.
- Turn on your device(Phone, Laptop Etc), search for Bobtot Sound Air3, and connect it.
Voice Prompts
- There is a voice prompt when turning on/off.
- Remind 3 times when it’s low battery, and turn off after 15s.
- Press the button to the maximum volume with a voice prompt. and the minimum volume without a voice prompt
Mode Switching
The wireless mode is entered by default after power-on. The the sequence of
mode switching is as follows: Wireless mode-TF card mode-USB mode-AUX mode.
LED lights
Wireless search status: white light flashes quickly, about 0.5 seconds/time;
wireless pairing status: white light is always on. Playing status: The white
light flashes slowly for about 1.5 seconds/time; Charging status: The red
light always on when is charging, and the red light will off when full charge.
Volume
The default volume of the speaker is 70% when it is turned on.
Charging Reminders
The machine has a built-in overcharge protection circuit, which can be
connected to a computer or charger for about four hours for fully charged. The
playing time of each battery will vary depending on the volume used.
No Working Mode
It will automatically shut down after 15 minutes when it’s not playing.
Troubleshooting
- Automatic shutdown: when the battery power is low, the battery protection will be turned on automatically, please charge for 4 hours Use later.
- Unable to play music: The music file storage path cannot be recognized by the player. Please store the music file in the root directory of the removable device.
- No sound when connected to the computer: the computer interface is connected incorrectly, please select the correct audio output port
- The key does not respond or the function is disordered: try again after shutting down.
- If the machine is stuck in an abnormal situation, press the reset button in the AUX jack
About the Warranty
- We provide one-year warranty service.
- Man-made damage is not warranted.
- Customers must offer the necessary information(Order ID, Order Platform).
- To redeem the warranty, please email us at service@bobtot.net for further assistance.
RF warning for Portable devices:
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>