Heart of Tafiti HT355PT Digital Video Baby Monitor Instruction Manual
- June 5, 2024
- Heart of Tafiti
Table of Contents
Heart of Tafiti HT355PT Digital Video Baby Monitor
Setup and use your digital video baby monitor
Installing Baby Unit
- Connect the small plug of the power adapter to the Baby unit and push the DC plug to the end. Only use the enclosed adapter (5V DC 1000mA). You will see the green LED is turned on.
- 2 Place the Baby Unit on a flat surface, such as a desk or shelf, or mount the camera on a wall.
- Connect the small plug of the power adapter to the Parent unit and push the connector to the end. Only use the enclosed adapter (5V DC 2000mA). Recommend charging time of at least 3 hours before first-time use.
Precaution: use of battery for Parent Unit
When the battery level is low, the power on-off LED flashes red, monitors come with a sound alert and the battery icon on the LCD display flashes red.
Extend the life cycle of the battery: Only charge the battery when the battery life indicator is low. Constant recharging of your battery before the low battery indicator light comes on will decrease the life of your batteries.
Optimize battery life: Louder speaker levels consume more battery power and shorten battery life. Switch on power-saving mode and tune the speaker sound level to level 1 to have optimized battery life
Frequently Asked Questions
The monitor cannot hold camera connection
Please check whether the monitor is selected to CAMERA SCAN mode. Monitor switches between paired cameras around every 10 seconds. When the monitor switches the camera which is not powered on, the monitor display Lost Link.
You could use the SPLIT button to select the camera you want to watch.
Sound Bar
This soundbar is designed for deaf parents to reflect the sound level picked up from the camera. You could disable this display in the menu.
Save more battery energy with ECO mode by switching off both screen and audio
POWER SAVING button switches off-screen and keeps audio on (default setting “SCREEN OFF”). You have another choice of switching off both screen and audio by using the ECO mode option. In ECO mode, both sound and screen are shut off when the monitor is entering POWER SAVING. The monitor will be activated when the camera detects a sound that exceeds the activation sound level you selected (The default level is medium). You could select activation sound level between loud, medium, and little level in the menu.
Switch off “Quick Guide”
When you are familiar with this monitor, you could switch off this Quick Guide in the menu.
Pairing Camera
Choose from unpaired cameras in Menu first, you would see a pairing message showing up on the screen. During the pairing message on the screen, press the camera pairing button for 3 seconds. When the camera and monitor are paired, the video is on the screen automatically.
Audio Scan
Press the MENU button to activate the Audio Scan function in split-screen display mode. Press the MENU button again to deactivate the Audio Scan function. Monitor switches audio between each camera sequentially every 10 seconds. The red frame indicates the camera where the audio comes from.
