Shenzhen Hangrui Hechuang Technology HR-133S 13.3 Inch Android Rear Seat Entertainment System User Manual

Shenzhen Hangrui Hechuang Technology HR-133S 13.3 Inch Android Rear Seat

Entertainment System

INTRODUCTION

The scheme is created based on 64 bit Amlogic972 Android chip, Cotex A55 1.8GHz Octa-core CPU, Android operating system, which supports Android Mobile Phones and iPhone Wireless Miracast/Airplay, built-in 2GB DDR4 and 16GB memory. It processes powerful multimedia audio and video processing capabilities, supports 4K/8K ultra high definition video playback, built-in graphic processing unit, and capacitive touch screen. The scheme uses high- performance Wi-Fi. Core board external interface has USB, TF, HDMI and earphone, with strong extensibility and a slim design, which is able to meet the demands of various car systems.

SPECIAL FEATURE

• Various signal interfaces, no external chip expansion required
  Support HDMI, Video input, TF card, USB.

• Built-in quality image processing engine
  MACE-PRO4 image processing engine can eliminate noise from TV or network video, remove the loss of details and color in video signal transmission, thus improve picture quality, recover all the content details and restore natural and detailed image of the world.

SPECIAL FEATURE

• Super multimedia processing capability,
  support max 4K/8K H. 265 video

• Support mobile phone wireless Miracast
  Support Android Miracast, iphone Airplay wireless Miracast.

TECHNICAL SPECIFICATIONS AND PARAMETERS

Video: complex video signal output (AV) USB port

MS/MMC/SD card port

Video System| PAL / NTSC / AUTO
Power Voltage| DC 12V/1.5A
Power Consumption| About: 12W; Rating Circuit: 800mA; Rating Power: 9.6W
Working Temperature| -20°C ~ +60°C
Working Humidity| 15~75% (No water drop is coagulated)
Video Decoder| Support HEVC / H. 265 3840 ×2160@60 fps DXVA Support H. 264 decoding 1080P @60 fps

Support SVC decoding 1080P @60 fps Support MVC decoding 1080P @60 fps

Support H. 263 decoding, max image resolution is 720×576 Support Sorenson Spark decoding 1080P @60 fps

Support MPEG-4 decoding 1080P @30 fps Support MPEG-2 decoding 1080P @60 fps Support MPEG-1 decoding 1080P @60 fps Support MPEG-2 decoding 1080P @60 fps Support VC 1 decoding 1080P @60 fps Support JPEG decoding

Support RV decoding 1080P @60 fps Support VP 6 decoding 1080P @60 fps Support VP 7 decoding 1080P @60 fps Support VP 8 decoding 1080P @60 fps Support WebP decoding 1080P @60 fps Support AVS+ decoding 1080P @60 fps Support RMVB decoding 1080P @60 fps

WIFI| 2.4G/5G WIFI
HDMI| Support HMDI 2.0/1.4 b Support HDMI ARC function

Support one input of MHL3.0/2.1

USB| Support 2-way high-speed USB 2.0 Host
TF Card| Support high-speed SDIO 3.0 Support max capacity of 1TB
Audio| Support stereo audio input Support stereo earphone output Built-in 2X5W@4 ohm Speaker
FM Receiver| Support stereo audio receiver, freq 76 MHz-108 MHz can be chosen
Infrared| Support stereo infrared transmission
Other Hardware Features| Automatically enter the sleep or shutdown mode upon closing ACC

Low battery monitoring protection system Prevention of reversing the power supply Support max 36V voltage input

Software Features| Operation system: Android

Support Android/Iphone wireless Miracast

FUNCTION INTRODUCTION

1. LED Settings
2. Function of Android system to return to the previous level
3. Back to main interface of Android system
4. Shortcut icon function (slide each process to end)
5. Short press to turn on and long press to turn off; Short press to turn off the display screen when working
6. Shortcut operation
7. Hidden icon
8. Water light
9. LED light
10. System settings
11. HDMI input
12. Reset
13. TF card interface
14. HDMI output
15. USB interface
16. Earphone interface
17.  DC 12V input

INSTALLATION

1. After press the switch down, as shown in figure 1.

2. Put the matching model of pipe size plastic ring in groove, as shown in figure 2.

3. Adjust the bracket spacing to the left/right,adjust the spacing to proper car model pillow pipe, then the bracket snaps into pipe.

4. Open the switch lock of adjusting direction, move forward and backward adjust to appropriate length, then lock the switch lock.

SYSTEM SETTING

• Language setting
  Click “setting” button under the menu and choose “Language & input”.

Select “Language” project and then select corresponding language.

• Function setting of Wi-Fi
  Click “settings” button under the main menu and open “Wi-Fi” and select suitable access source.

• Setting of car logo
  Click “settings” button under the main menu, select “Display” and then click “Boot logo” and input password “ANDRSE” and then select corresponding car logo (show changed car logo after restarting).

• Screenshot settings
  Click “settings” button under the main menu, select “System” and then select “Screenshot” in the display pictures, input password “ANDRSE” and then conduct corresponding operations.

• Shortcut operation
  Click “ ” icon under the main menu, to display four function selections.

  • 1 Ambient lighting selection
  • 2. LED light adjust
  • 3. FM
  • 4. Volume adjust
  • 5. Screen brightness

• Led light effect
  Atmosphere lights:
  Click “settings” button under the main menu, select “Led light effect”, there are 7 different colors of atmosphere lights, click the corresponding color on the screen, the LED light on the back of the device will show the corresponding color, and click “CLOSE” to turn off .

• Change the theme

  • 1. Click “Settings”
  • 2. Find “Display” and click to enter.
  • 3. Click “Factory settings”, Enter password: ANDRSE and click “OK”.
  • 4. Click “Theme Setting”.
    Then you can choose the home screen you want.

FUNCTION OPERATION

• File explorer
  Click the icon “File Browser” under the main menu, enter next level menu and then conduct document copy, paste, move and deletion and other corresponding operations.

• Mobile phone interconnection of Android system
  Firstly, click “Settings” button under the main menu and open “Wi-Fi” function and then return upper level to click “MiraCast” icon, enter sub-menu to open “Enable Mcast” and then select the name of this mobile phone device.

• Mobile phone interconnection of Android system
  Firstly, click “Settings” button under the main menu and open “Wi-Fi” function and then return upper level to click “MiraCast” icon, enter sub-menu to open “Enable Mcast” and then select the name of this mobile phone device.

• After successful connection, picture operated on Mobile phone will synchronously display on the device.

• Select “Multi-screen interaction” of mobile phone, and then select “Back to my device”and then you can exit mobile phone interconnection.

• Apple iOS

  • Enter into “Wi-Fi” function option of the mobile phone firstly, turn on Wi-Fi hot spot of the mobile phone.

  • Choose “HappyCast” icon in menu.

  • At the same time open “AirPlay” of iPhone (The “AirPaly” function option will appear when you slide the mobile phone main interface from below upward).

  • Choose corresponding AirPlay device name from the mobile phone, open mirror image. When successful connection, images operated on the mobile phone shall be synchronously displayed on device screen.

  • Exit from mobile interconnection when choosing “iPhone” on the mobile phone.

• Connect to the network
  Set Wi-Fi hot spot of mobile firstly, and then set the access code. Turn on the Wi-Fi function of android monitor, to find Wi-Fi hot spot name of corresponding mobile phone, click to access. (Input password if necessary)

  • Enter into mobile network share of the smart phone, launch 4G (or 3G) network, Re-enter into WLAN hot spot, open the interface of mobile phone device number to set hot spot name, password and save them at last.

  • After well set the iPhone, to set local settings. Turn on Wi-Fi function of the android monitor. Find Wi-Fi hot spot device name of corresponding iPone, input password corresponding to iPhone, click to access.

DEVICE CONNECTION

FCC

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>