Max Sales Group NV-06782-2 Rechargeable Quadcopter Drone Instruction Manual

VISTAEC
INSTRUCTION MANUAL

• Please read this manual corefully before operation and keep it properly for fulure reference.

KNOW YOUR DRONE

With 2.4G frequency band for long remote control distance, Orone allows multiple flights at the same time without any interference. User can control it to fly, hover and take photos/ videos with APP and WIFI connection on smartphone.

1. Upper Casing
2. Lower Casing
3. Blode
4. Blode Guard| 5. Arm
6. Bottery
7. Motor
8. Comera
---|---

ACCESSORIES

PRE-FIGHT PREPARATION

1. FLIGHT ENVIRONMENT

indoor: Spacious spaces away from bartiars, crowds or pets ore preferred

Outdoor: Sunny & windless weather are preferred.

Please keep the drone in sight during the flight and keep it way from barriers, high-tension cables, trees and people.

Do not y in extreme weather such as very hot temperature, very cold temperature, strong winds o¢ raining.

2. OPEN THE WINGS
OPENING STEPS:

1. Open the front armiciase to camera}
2. Open the back arm
   To close the wings reverse the steps.

3. ASSEMBLING BLADE GUARD

|
---|---
1. Align the blade guard with the two holes below.| 2. Press firmly on the arrow position

4. REPLACING THE BLADE

| |
---|---|---
1. Unscrew and remove the blade.| 2. Replace with corresponding blade.
Note: there is a marking (A or B) on the blade and on the heam.,| 3. Screw the blade frrmly

5. CHARGE THE DRONE

A. Remove the rechorgeabie battery from the boitom of the drone.

B. Connect the USB charging cable to USB DC SV power supply and the rechargeable battery.

Notes:
Red LED light is on when charging. Red LED light is off when fully changed. Charging time is about 150 minutes. Playtime is about 7 minutes.
The red and bive light on the drone will start flashing which indicates the battery is low. The battery needs to be charged fully before operating again.

BATTERY CAUTIONS

• There is a certain risk when using lithium battery. It may couse free, body injury or property loss. Users must be owore of the risks and take full responsibility of using batlery improperly
• If battery leakage occurs, please avoid contacting your eyes or skin «with electrolytes. When in contact, please wash your eves with clean water and seek medical care immediately,
• Please remove the plug immediately if you sense any pecubar smell, noise, or smoke,

Battery Charging

• Pleose use the original USB changing cable provided from the Manufociurer to ensure your sole usage.
• Do not overcharge botlery. Please unplug the charger once fully charged
• Donot charge overnight.
• Do not charge the battery next to inflammobles, such os carpet, timber floor, or wood furniture or on the surface of electro-conductive objects Please always keep an eye on the battery when charging.
• Do not charge battery when it is hot or worm.
• The charging temperature should be between 32 F to 104 F. Battery Racycling
• Do not dispose the battery as doily rubbish Please fomisorize yourself with the local garbage disposal method and dispose it according to the special requirement

KNOW YOUR REMOTE CONTROL

1. Parts of remote control

1. Antenna
2. Left side fly fine-tuning
3. Left joystick
4. One-key toke off
5. One-key landing
6. Power ON/OFF button
7.  Backward fine-tuning| 8. Forward fine-tuning
9. Right joystick
10. Right side fly fine-tuning
11. Headless mode
12. High/low speed
13. One-key 360° flip & roll
(14. One-key calibration
---|---

REPLACING BATTERY OF THE REMOTE CONTROL

1. Open the remote contro! battery cover

Open the battery cover and insert the 3 AA botteries correctly ‘according to the electrode instructions (Batterles not included)

Notes:

1. Make sure the bottery ore loaded correctly according to the polarity indications on the battery compartment
2. Please do not mix old and new batteries together
3. Please do not mix different types of battenes together

PAIRING THE REMOTE CONTROL AND THE DRONE

1. Press the ON/OFF button on the drone for 2 seconds fo tum on the drone. The indicator light on the drone will stort flashing. Ptoce it on a flat surface.

2. Press the ON/OFF button on the remote control. The indicator light on the remote control! will start flashing. Push left joystick totally up and then push totally down. Both LED indicator lights on the drone and remote control will turn to steady if pairing is success.

CALIBRATION
Prass the one-key calibration button when the drone fails to toke off vertically. The indicator on the drone will start flashing when calibration. Turn to steady after finish. The drone must be place on horizontal flat surface when calibration.

START YOUR FLIGHT

1. One-key take off
   Press the One-key take-off button, the drone will fly to about 5 feet height.

2. Basic Flight
   Use lel joystick bo control the flight altitude and burn left / right.
   Right joystick fo control the forward, backward, left ond right side flight directions.

Left joystick

Right joystick

360° Flip & Roll
Make sure the drone is reaching over 9.8 feel height. Press 360° Flip & Roll button and move the right joystick to left or right direction.
The drone vill rotate in that direction.

Right joystick

Headless Mode
The flight directon of the drone is subjected 10 the direction of the remote control.

1. The drone is defaulted as common mode when connected with the remoie consol. Press the headless button, the remote control will beep sound once. The indicator light on the drone will flashing when success in headless mode. Prass again with beep sound to exit the headless mode, The indicator light on the drone tum steady.

2. Inthe headless mode, there is no identify of the nose direction.
   Control the drone according to operate the lever of remote control,

Hover
When you release the left joystick after the ascent/descent action, the drone will hover at c certain height

TRIMMING FUNCTION

When deviating from course, you can fine-tuning for calibration until the drone is back fo normal.

If the drone drifts forward, press the backward fine-tuning button Tepectedly, until the drifing is gone.
If drifts backward, press the forward fine-tuning button forward repeatedly until The dialing stops.
If the drone drifts right, press the left side fly fine-tuning button repeatedly, and the opposite if 4 drifts left. Oo this until you ore solished how the drone hovers.

Notes:
When the drone is flight less than 11.8 inch height from the ground, it will be affected by the blade vortex made by itself and become unstable. This is “ground effect”, The lower the drone is, the greater the effect will be.

FAQ

rechargeable hi: Mery correctly.
Too strong wind force| Do not fly in windy days. The performance and the control of the drone will be affected by the strong wind.
Foil to ascend| The rotation speed of main blades is loo slow.| Push up the left joystick
Low battery.| Please charge the battery.
Landing too soon| Left joystick pull down too fast.| Left joystick pull down slowly.
Out of control| Beyond the effective controlling distance.| Ensure operation within the controllable distance. Remote control: within 164 feet
Wifi control. within 98 feel

USE WITH SMART DEVICE ( NOT INCLUDED)

1. TO INSTALL THE APP IN YOUR SMART DEVICE
   Scan the corresponding QR code to download and install the APP (HFun_Pro).
   https://qr02.cn/ChAiCf

2. CONNECT THE DRONE AND SMART DEVICE USING WIFI
   Turn the drone on. While red flashing light is on, turn on the WIFI function in your smart device and select the name “WIFI_FRH_XXX” in the list to make the connection. After connected, open the “HFun_Pro” app. Press “START” in program. The indicator light on the drone will turn steady after success. The smart device screen will start streaming video with the drone.
   * Please turn off the drone and WIFI function on your smart device. Make sure the app on your smart device is closed completely. Redo the above step if connection is not success.
   * Control distance and the live streaming video will depend on the WIFI quality of your smart device.**

3. MAIN INTERFACE INSTRUCTIONS

4. start
   – To enter the flight interlace

5. ? HELP)
   – Quick start guide and list of icon function

6. INTERFACE OPERATION INSTRUCTIONS

7. Return
   Return to main interface

8. Take Photo
   Press fo take photo

9. Record Video
   Press to start video recording, press again to stop

10. Media
    Enter the photo or video library. Press return icon to exit.

11. Speed Level
    To switch the speed of the drone between 30% / 60% / 100%

12. Gesture Recognition
    Press fo turn on gesture fo take photo or video record function. Press again to turn off.

13. Gravity Control
    To control the drone forward / bockward / left side flight / right side flight by controlling the gravity of the smart device.
    Note: it may not work with some old version or without gravity sensor smart devices.

14. Switch
    Turn off / on the screen left and right joystick.

15. Extra Setiings
    Open / dose the exira function menu.

16. Camera flip
    Flip the camera screen upside down on the smart device.

17. VR Mode
    Provide VR screen for your 3D virtual reality hecdset (not included).

18. Headless
    Tum on/off headless mode.

19. Gyro Calibrote
    Calibration of the drone.

20. Toke Of
    One key take off.

21. Emergency Stop
    Press for the emergency stop.

22. Landing
    One key landing.

23. Spaech Recognition
    Voice recognition: take off / landing / forward / backward / left / right.

24. 360° Roll
    Press 360° roll and drag left joystick to left or right fo 360° flip and roll.

25. Marking Flight
    Drow o path on the smart device screen. The drone will follow the path to flight.

26. Throttle
    Ascent or descent of the drone.

21. 22. Leh / Right Roll
Turn lef or right of the drone.

23. 24. Forward / Backword
Move forword or backward of the drone.

25. 26. left / Right
Move left or right of the drone.

27. 28. Forward / Backword Trim
Fine-tune forward or backward.

29. 30. Left/Right Roll Trim
Fine-tune left / right roll,

31. 32. Left / Right Trim
Fine tune left / right.

USE WITH REMOTE CONTROL AND STREAMING VIDEO ON THE SMART PHONE

1. Tum on the drone and remote control.
2. Pairing the remote control with the drone.
3. Connect the smani device to the drone.
4. Open the app and play.

Note: When the drone is connected to the remote control and the smart device, it cannot be flown using the smort device. Only other functions like recording videos and taking photos con be done vio the smart device.

HOLD THE SMART DEVICE ON THE REMOTE CONTROL

Printed in China

FCC Caution:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. (For:2.4G RC DRONE WITH 0.3MP WIFI CAMERA-Remote Control)
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. (For:2.4G RC DRONE WITH 0.3MP WIFI CAMERA)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>