Shenzhen DZH Industrial DW620 2.4GHz Wireless Slim Mouse User Manual

Shenzhen DZH Industrial DW620 2.4GHz Wireless Slim Mouse User Manual

Mouse schematic

A Left Button
B Right Button
C Scroll Wheel
D ON/OFF
E Connect
F Battery SlotJReceiver

2.4G Connection instructions

1. Please tum on the power switch at the bottom, install an AA battery, and indicate the green light.
   

2. Take out the receiver and plug it into the USB port. (Make sure your computer device USB interface is available)

3. After the computer ,s recognized, you can use the mouse

Bluetooth Connection With System (Win10)

1. Tum on the power switch, press the Bluetooth alignment switch, switch to the BT1 channel, and hold down the Bluetooth alignment switch for 3S. The Bluetooth indicator blinks and enters the alignment state.

2. Open the settings, open Bluetooth, click on Bluetooth, and search.

3. Until the “BT3.0 Mouse / BT5.2 Mouse” is found, Then click on the pairing connection.

4. There is a tip for connecting successfully, you can use your mouse comfortably.

Bluetooth Connection With System (MasOS)

1. Turn on the power switch, press the Bluetooth alignment switch, switch to the BT1 channel, and hold down the Bluetooth alignment switch for 3S. The Bluetooth indicator blinks and enters the alignment state

2. Please open system preferences and click on Bluetooth.

3. Until the “BT3.0 Mouse / BT5.2 Mouse” is found, Then click on the pairing connection.

4. Then, is a tip for oonnecting successfully ,you can use your mouse comfortably.

Bluetooth Connection With System (Android)

1. Tum on the power switch, press the Bluetooth alignment switch, switch to the BT1 channel, and hold down the Bluetooth alignment switch for 3S. The Bluetooth indicator blinks and enters the alignment state

2. Open “Bluetooth” into search mode.
   

3. Until the “BT3.0 Mouse / BT5.2 Mouse” is found,Then click on the pairing connection
   

4. There is a tip for connecting successfully,you can use your mouse comfortably
   

Technical Specifications

Product size: 111 X 59 X 30 mm Number of keys : 3 keys
2.4G working current :<16 mA Mouse weight : 56 g
2.4G standby current: <0.7 mA DPI: 1200
Bluetooth working current: <12 mA
Bluetooth standby current: <O. 7 mA
Sleep time: 10 minutes
Awaken way: Press keyv
Sleep current : 60 uA

Troubleshooting
Please contact the after-sales service

Copyright
II 1s forbidden to reproduce any part of this manual without the permission of seller

Safety instructions
Do not open or repair this device, Do not use the device 1n a damp environment Clean the device with a dry cloth

Warranty
The device is provided with one-year limited hardware warranty from the purchase day

Mouse Maintenance

1. Please keep the keyboard away from liquid or humid environment, saunas, swimming pool, steam room and don’t let the keyboard get wet in the rain
2. Please don1 expose the keyboard at too high or too low temperature condition
3. Please don1 put keyboa巾under sun for a long time
4. Please don1 put keyboard close to the flame, such as cooking stoves.candles or fireplace
5. Avoid sharp objects scratching products, timely to recharge products to ensure the nOITTial use

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Warranty Card

This reason due to the product broken and damage is not include on the warranty.

1. accidents, misuse, improper operation, or any unauthorized maintenance, alteration, or disassembly;
2. Improper operation or maintenance, violation of product instructions or improper connection of power during use;
3. Or use consumables (such as spare batteries) that are not provided by the company but applicable laws Except where such restrictions are prohibited.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>