ednet 84103 Quick Charge 3.0 Car Charger User Manual

: June 5, 2024
: ednet

Table of Contents

ednet 84103 Quick Charge 3.0 Car Charger
INTRODUCTION
FEATURES
SPECIFICATIONS
PACKAGE CONTENTS
OPERATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ednet 84103 Quick Charge 3.0 Car Charger

INTRODUCTION

This product is a high-performance car charger equipped with two USB output ports, one supports 5V/2.4A smart charging, and another is compliant with Qualcomm® Quick Charger™ 3.0 technology. With this car charger, it is feasible for you to charge any devices (eg: digital cameras, PDAs, mobile phones, USB accessories) in your car when it is in necessary. Two devices can be charged at the same time. It is helpful and convenient in a long time journey or a business trip.

FEATURES

Allows the 12 -24VDC of input voltage
2 USB ports with different output:

USB1: 5V/2.4A, with intelligent IC detect output requirements of your device automatically

USB2: Intelligent integrated circuit equipped measures output and automatically adjusts power outputs of 3~6.5V/3A, 6.5~9V/2A, and 9~12V/1.5A for charging fast and safety.

Compliant with Qualcomm Quick Charge 3.0, charging speed is four times faster than normal charger.
Accurate limited current output and over current protection.
Over load protection and short circuit protection.
Over temperature protection with auto-recovery.
Select precision electrical components, fire lane version, and imported file-resistant plastic materials.
Light, smart and convenient to use.

SPECIFICATIONS

Input/Output

Input| 12~24VDC
Input Plug| Cigarette Lighter
Output| USB1 (Smart): 5V DC 2.4A

USB2 (QC 3.0): 3~6.5V/3A, 6.5~9V/2A,

9~12V/1.5A

NOTE

More than 98% of electronic products on the market can be charged via USB1
The charging speed is four times faster than the normal when charged via USB2

PACKAGE CONTENTS

Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:

Main unit × 1
User Manual × 1.

OPERATION

Operation Procedure

Plug the USB car charger into the car cigarette lighter, and LED light turns blue.
Plug the USB connector of the USB cable into the car charger’s output interface, then plug the other end of the USB cable into the electronic devises (such as mobile phone, MP3, camera series).
Please pull the car charger out after the electronic devises are fully charged.

Operation Notes

Please plug the car charger after starting the car.
Please pull the car charger out after use or car flameout.

Note: Our products have protection functions, and the two tips above are suggestions just for safety.

Do not use the car charger with electronic products which own over-charging specifications, so as to avoid any problems caused by specification mismatching.
Car charger will be a little overheated in the use process, and it’s a normal phenomenon under the normal room temperature of less than 65 degree Celsius.
When the car charger stops working under over-current, over-temperature or short-circuit protection, please unplug the device after it automatically returns to work. Please check whether the device is compatible with this charger.
Do not place or storage the car charger close to fire, such as stove, candles etc.
Do not place or storage the car charger soak into liquid, such as swimming pool, bathtub, etc.
Do not wash the car charger with corrosive cleaner.
If the car charger cannot work properly, please contact the store or distributor in your area.

Hereby ASSMANN Electronic GmbH declares that this device is in compliance with the requirements of Directive 2014/30/EU and the Directive 2011/65/EU for RoHS compliance. The complete declaration of conformity can be requested by post under the below-mentioned manufacturer address.

Warning: This device is a class B product. This equipment may cause some radio interference in the living environment. In this case, the user can be requested to undertake appropriate measures to prevent interference.