Lear JYU22A Transmitter test report User Manual
- June 5, 2024
- Lear
Table of Contents
Lear JYU22A Transmitter test report
introduction
The device under test is manufactured by the grantee (Lear Corporation), and
sold as an OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, etc…, the
grantee must ensure the end-user has all applicable/appropriate operating
instructions. When end-user instructions are required, as in the case of this
product, the grantee must notify the OEM to notify the end-user.
Lear Corporation will supply this document to the reseller/distributor
dictating what must be included in the end user’s manual for the commercial
product. INFORMATION TO BE INCLUDED IN THE END USER’S MANUAL
The following information (in blue) must be included in the end-product user’s manual to ensure continued FCC and Industry Canada regulatory compliance. The ID numbers must be included in the manual if the device label is not readily accessible to the end-user. The compliance paragraphs below must be included in the user’s manual.
FCC ID: KOBJYU22A IC: 3521A-JYU22A
FCC Rules
This device complies with Part 15 of the FCC Rules and with ISED Canada license-exempt RSSs. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
Note : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Lear Corporation
E-Systems Division 21557 Telegraph Road Southfield, MI 48033
Phone: 248-447-1500