Pinghu City Cang Sheng Plastic Factory CS03-12VTOUCH Device Instruction Manual

June 5, 2024
Pinghu City Cang Sheng Plastic Factory

Pinghu City Cang Sheng Plastic Factory CS03-12VTOUCH Device

Pinghu City Cang Sheng Plastic Factory CS03-12VTOUCH
Device

CS03-12VTOUCH

Pinghu City Cang Sheng Plastic Factory CS03-12VTOUCH Device FIG
1

  1. Panel buttons are the touch buttons
  2. Mode key: (Cut into Bluetooth mode/radio mode, long-press the pause/ play key in radio mode, automatic search station
  3. Bluetooth name: Kidzone Ride-On
  4. External button 1: short press switch D, (D light on when switching D,) D icon is blue
  5. button 2: short press to switch S gear, (the D gear light will turn off when you switch S gear,) the S gear icon is red

There is a low power prompt sound: when the power is lower than 14V, there is a low power prompt, prompt once every 30 seconds, prompt after 10 times, will prompt the very low power prompt sound twice after turning off.

FCC

FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Statement
To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated with a minimum distance of 20cm from the radiator of your body. This device and its antenna(s) must not be co‐located or operated in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals