AKKTOL BT-607 RIVET Nut Tool User Manual
- June 3, 2024
- Akktol
Table of Contents
AKKTOL BT-607 RIVET Nut Tool
Thank you for choosing to buy an AKKTOL product, please register your warranty, if you have any doubts left, welcome to contact us, we are here to help you.
Warranty Registration
3 easy ways to register your 2-year limited warranty.
Precautions
-
Before your start, please inspect the hand nut riveter and accessories.
Make sure they are all intact. -
Before your start, please check if there is any foreign matter on the mandrel.
-
To avoid damage to threads, do not tighten too much with a wrench.
-
Maintenance of the machine:
For long time storage, the foreign parts of the mandrel need to be cleaned and coated with a little anti-rust oil or lubricating oil. -
Keep the hand nut riveter and accessories away from Children.
Parts Name
Technical Description
Name
|
Rivet Nut Tool
---|---
Model| BT-607
Weight| Approx. 1350g
Length| 410mm (16″)
Max. Working Stroke
|
9mm
Max. Effective Working Stroke| 7mm
Mandrel Specification
| Metric M3,M4,MS,M6,M8,M10,M12
SAE 6-32,8-32,10-32,10-24,1/4-20,5/16-18, 3/8-16,1/2-13
Max. Multiple of Arm Force| 30 Times
Packing List
| Name | Picture | Qty |
|---|
Rivet Nut Tool
| |
1pcs
Nosepiece
| ****
M3,M4,M5,M6,M8,M10,M12,
6-32,8-32,10-32,10/24,1/4-20,5/16-18,3/8-16,1/2-13
| ****
1pcs/ model
Mandrel
| ****
M3,M4,M5,M6,M8,M10,M12,
6-32,8-32,10-32,10/24,1/4-20,5/16-18,3/8-16,1/2-13
| ****
1pcs/ model
Mandrel Box
| ****
M3,M4,M5,M6,M8,M10,M12,
6-32,8-32,10-32,10/24,1/4-20,5/16-18,3/8-16,1/2-13
| ****
1pcs/ model
Rivet Nut
| M3,M4,M5,M6,M8,M10,M12,
6-32,8-32,10-32,10/24,1/4-20,5/16-18,3/8-16,1/2-13
| 1pack/ model
Wrench
| |
1pcs
Storage Box
| |
1pcs
User Manual
| | ****
1pcs
Warranty Card
| | ****
1pcs
Apply to All Kinds Nut for Various Materials:
NOTE:
Once you have determined the hole size, the hand nut riveter must be equipped
with the appropriate mandrel and a matching-size nosepiece.
Riveting Diagram
How to use the Scale Identification
-
Initial State
The top of white line should be at 0mm when the handles are closed (Fig 1 ).
-
Stroke Check
Open the handles, the top of white line is at 6mm( Fig 2), so the working stroke is 6mm, the nut height will be decreased 6mm after riveting.
Working Stroke Adjustment
- Fully open the handles to thread the nut onto the mandrel stem.
- Loosen the locking nut.
- By rotating the outer sleeve outwards(Fig4), the working stroke will become longer, by rotating the outer sleeve inwards(Fig4), the working stroke will become shorter.
- Close the handles slightly until the rivet nut get a force, confirm the working stroke or adjust the suitable working stroke again.
- Tighten the locking nut.
- Make sure the rivet nut is always at the bottom of the mandrel stem.
How to work
STEP 1:
Open the handles to thread the rivet nut onto the mandrel stem.
STEP 2:
Put the rivet nut into the hole and close the handles to rivet.
STEP 3:
Rotate the installation knob counterclockwise to release the rivet nut tool after riveting.
Changing Mandrels
Use a matched wrench to remove the nosepiece.
Push the sliding sleeve back and hold it down. Rotate the mandrel to remove it.
Push the sliding sleeve back and hold it down, screw the mandrel.
Thread on and tighten the nosepiece, release the sliding sleeve.
Ready to rivet.
Check the video on youtube
AKKTOL CUSTOMER CARE
If you have any doubts left, welcome to contact us, we are here to help you.
Made in China
Yibei Technology (Shenzhen) Co., Ltd 13A10, Global Logistics Center, China
South City, Pinghu Longgang, Shenzhen, China 518000 AKKTOL is a trademark of
Yibei technology (Shenzhen) Co., Ltd, registered in the United States and
other countries.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>