AKKTOL BT-811 Heavy Duty Hand Riveter User Manual
- June 3, 2024
- Akktol
Table of Contents
BT-811 Heavy Duty Hand Riveter
User Manual
Thank you for choosing to buy an AKKTOL product, please register your warranty, if you have any doubts left, welcome to contact us, we are here to help you.
Warranty Registration
3 easy ways to register your 2-year limited warranty.
https://www.facebook.com/akktol
Precautions
- Before your start, please inspect the hand riveter and accessories. Make sure they are all intact.
- Keep the hand riveter and accessories away from Children.
Technical Description
| Name | Heavy Duty Hand Riveter |
|---|---|
| Model | BT-811 |
| Weight | Approx. 940g |
| Length | 330mm (13) |
| Work Area | 9mm |
| Max. Multiple of Arm Force | 30 Times |
| Nozzle Specification | 2.4mm(3/32), 3.2mm(1/8), 4.0mm(5/32), 4.8mm(3/16), |
6.4mm(1/4)
Product
1. Round Knurling Sleeve
2-6. Nozzle
7. Collection Bottle
8. Handle
Precautions:
- Please check if the accessories are complete and correct before use.
- Please check if the Nozzle has foreign objects before use.
- Do not place the rivet gun in a damp or oily place.
- Please use the rivets corresponding to the specifications in the manual for rivet work.
- When drilling work is required to drive the workpiece, please read the drill instructions and do the work to avoid accidental injury.
- Please recycle the discarded rivets correctly.
- Pull rivets and rivet guns. Please keep it out of the reach of children.
Apply all kinds of materials for rivets:
Rivets| 2.4mm
(3/32″)| 3.2mm
(1/8″)| 4.0mm
(5/32″)| 4.8mm
(3/16″)| 6.4mm
(1/4″)
---|---|---|---|---|---
Aluminum| | •| •| •| •| •
Steel| •| •| •| •| •
Stainless
Steel| •| •| •| •| •
Pull rivet gun use range:
Pull rivet gun work steps:
Drilling a suitable hole in two needed riveting parts.| insert the riveted into the hole.| Close the handles to the rivet, well then exit the riveter.
If you need to drill the hole, please refer to the size of the blowing table.
Rivet nozzle| 2.4mm (3/32″)| 3.2mm (1/8″)| 4.0mm (5/32″)| 4.8mm (3/16″)| 6.4mm
(1/4″)
---|---|---|---|---|---
Drill hole size (D)| 2.5-2.6 mm| 3.3-3.4 mm| 4.1-4.2 mm| 4.9-5.0 mm| 6.5-6.6
mm
-
Refer to the installed hole and select the matching rivet and rivet nozzle.
-
Open the handle to the maximum angle, insert the rivet into the rivet nozzle. Insert the rivet into the rivet hole.
3. Close the handle back as shown, the rivet will be pulled off after
repeated riveting 2-5 times. ( Different rivets are broken several times)
-
After putting in place the rivet, as shown in the figure, open the handle and the nail core fall into the collection bottle.
Check the video on youtube
https://www.youtube.com/channel/UCb8xHXWadYAHnGPIo_o4UcA
Trouble Shooting
If jamming occurs, it is mainly caused by a mismatch between the rivet used and the rivet nozzle.
Solution:
- Close the handle twice to let the discarded mandrel stay on the side of the gripper.
- Choose the largest nozzle (6.4mm, 1/4) to replace.
- Before replacing it, make sure the handle is closed.
- After replacement, open the handle and the discarded core will fall off immediately.
AKKTOL CUSTOMER CARE
If you have any doubts left, welcome to contact us, we are here to help you.
Web
www.akktol.com
https://www.facebook.com/akktol
Made in China
Yibei Technology (Shenzhen) Co., Ltd
13A10, Global Logistics Center, China South City, Pinghu,
Longgang, Shenzhen, China 518000
AKKTOL is a trademark of Yibei Technology (Shenzhen) Co., Ltd,
registered in the United States and other countries.