Shenzhen Sawco Electronic Technology WSC880FCC Wireless Security Camera User Manual
- June 5, 2024
- Shenzhen Sawco Electronic Technology
Table of Contents
USER MANUAL
REC YOUR LIMITS
Boxing
Diagram
Waterproof Rating: IP64 ( IP64: Fully dust tight and complete protection against solid objects; Protection assured against water splashing from any angle.)
| |
---|---|---
No using underwater| No using in torrential rain weather| Allow using in light
rain weather
Mounts Description :
How to Replace the Mounts
|
---|---
Push backward and Pull-Up (At the same time)| Pull-Down and Push backward (At
the same time)
1/4” screw mount: Add a 1/4” screw mount that could work on
Bike/Motorcycle/Car ( Excluded )
LED Indicators
LED Indicators
| RED LED| BLUE LED| GREEN LED
Power Less| Quickly flashing then turns off| |
Charging| Solid ON ( charging ) / OFF ( fully charged )| |
Loop Recording ( switch to motion
recording mode on APP)| | Flashing ( record ng)/ solid on ( stop recording g
)|
WIFI MODE| Flashing (disconnected with phone)/ Solid
ON (connected with phone )| |
Motion Recording( switch to loop recording mode on APP )| | | Flashing (
record ng) / solid on
( stop recording g )
If the LED indicator has an abnormal operation， Click the reset button 1 time
to reset the camera , and reboot again.
SD Card
Inserted a Micro SD Card （**Camera does not work without SD card）**
Inserted a formatted memory card, use only a high-speed Class 10 Fat formatted
Micro SD Memory Card ( ≤32GB choose Fat32 format; ≥64GB choose exFat format)
FORMATE SD CARD ON PC
→ Use a card reader to connect the sd card to the PC
→ You could get a New “USB DRIVE” on the Computer
→ Right-click “USB DRIVE”, and select “Format” to completely format. ( ≤32GB
choose Fat32 format; ≥64GB choose exFat format)
**** If you do not have a card reader, you could insert the sd card into the camera, and connect the camera to the PC to format the sd card.
Charging
CAMERA CHARGING
→ Plug into an external 5V1A/2A wall charger, computer, or power bank with the
USB cable provided. ( Do not support recording while connecting with computer
)
→ RED LED light is ON while charging; once the camera is fully charged, RED
LED light turns OFF. ( takes about 4 hours)
Power Less
-
When the battery is in low capacity :
A RED LED light is flashing until the battery died out then The camera shuts down. -
To avoid adverse effects, please do not use a high voltage charger.
-
When the camera is working while charging, the RED LED will display the charging working indicator state first, and display the WIFI working indicator state after fully charged. ( WIFI Mode is working normally )
Power ON/OFF & Recording
*If no/defect micro-SD card is inserted, RED /BLUE/GREEN LED will flash a
few times and then the camera will power off
Press and hold the button for 3 seconds to power ON/OFF the camera.
→ The camera starts video recording after powering on ( A BLUE LED light is
flashing during recording )
→ Press the once button to stop recording ( the flashing BLUE LED light turns
to solid on ), and press again to record a new video file.
For long time recording, the video streaming is saved and divided into
separate clips every 5 Minutes.
Connect the camera to WIFI on the APP for synchronizing the timestamp in
videos.
WIFI Connecting
Connect to the “RICAM ” APP
http://www.ligoor.com/app/ricam/ricam.html
→ Search APP name “ RICAM ” in Google Store or Apple Store to download the app
( Or scan the QR-Code );
→ Press and hold the button for 3 seconds to power ON the camera.
→ Push the button 1 time to open WIFI ( A RED LED is flashing ) ;
→ Tap setting > WIFI ( on smartphone );
→ Select WI-FI SSID “WIFI-Mate” and enter WI-FI Password ( default
password:12345678), then confirm it ( The flashing RED LED switches to a solid
one ) ;
→ Open the “RICAM” APP, Click to connect the camera
**** WIFI is a point-to-point, the camera can not be viewed remotely. the phone needs to be close to the camera ( less than 10 meters) to be able to view the live videos. Only support 1 visitor online. If you want to connect to a new smartphone, please disconnect the device from the old smartphone.
RICAN APP UI
Disconnected UI
Connected UI
Video Back Play UI
Menu Setting
Modify WIFI Name|
---|---
Modify WIFI Password|
Default Password:12345678, If you forgot the password, Long press the WIFI button until the camera power off to reset the WIFI SSID and Password. Then reboot the camera
Sound Recording| ON/OFF
Time Watermark| ON/OFF
Motion Detection| ON/OFF
Sensor Mirror| ON/OFF
Cycle Recording Time| OFF I 1 MINI3MINI5MIN
Video Resolution| 108011720PIWVGA
Photo Resolution| 12MIIOMI8MI5MI3MI2MHDIVGAII 3M
EV| -2.0 to +2.0
WDR| ON/OFF
TV Mode| NTSC/PAL
Light Frequency| 50Hz/60Hz
SD Total Capacity|
SD Available Capacity|
Format|
Restore Factory Settings|
Switch to Motion Detection mode （APP）:
→ Enter WIFI Setting
→ Turn on “Motion Detection”
→ Loop Recording Mode switch to Motion Recording ( A GREEN LED light is solid
on during motion detection mode )
→ As long as motion is detected, the camera will record ( the solid GREEN LED
light changes to a flashing light during recording, then back to solid on
while nothing is moving )
Data transfer to PC
Connect to Computer
→ Connect the camera to the computer via provided USB cable ( BLUE LED is
solid on )
Or: Take off the SD card from the camera, and use a card reader to connect it
to the PC )
→ A new USB Disk appears on your PC
→ Open the “DCIM” file to view the videos
**** The camera does not support recording while the camera connects with the computer.
Media player software on Windows :
VLC Media Player or KMPlayer
Media player software on Mac :
MPlayer or IINA|
---|---
Specifications
| Features | Loop Recording; Motion Detection |
|---|
WIFI Point to Point, APP Live-Steam
Waterproof IP64
Auto IR ON/OFF Night Vision
Detachable Clip for Body Wear
Detachable 1/4 inch screw universal Interface for the camera mount.
Video Resolution| 1080P (Default)1720PIWVGA
Video Format| H.264, MP4
FPS| 30 fps
Viewing Angles| 130 degree
Night Vision Distance| About 4 meters
Waterproof Rate| IP64
WIFI Distance| About 10 meters without any obstacles
Power Supply| DC 5V 2A / Built-in rechargeable 1050mah battery
Batter Life| About 5 hours ( WIFI OFF, IR OFF)
Storage| Max support 128GB Micro SD card, 128GB record about 21 hours
Interface| USB-C, Card Slot, Reset Hole
Camera Size (LxWxH)| 4.5cm x 2cm x 7cm
Camera Weight| 60g
Q1. I forgot the SSID password and could not connect to the WIFI, what should
I do?
Long press the WIFI button until the camera power off to reset the WIFI SSID
and Password. Then reboot the camera and connect to the WIFI via default
password and SSID.
Q2. The LED indicator abnormal operation， BLUE LED or RED LED always-on,
buttons could not work.
Click the reset hole 1 time to reset the camera, and reboot again.
Q3. Showed unable to join the WIFI network when I connect to the camera’s WIFI
Choose “Forget This Network”, and reconnect the WIFI with the correct
password.
Q6. The videos are showing abnormal when back play on PC. What should I do?
Download the recommended media player to view the videos on PC. Windows: VLC
Media Player or KMPlayer Mac: KMPlayer or IINA
Q7. PC asks me to format the sd card when I connect the camera to the PC.
Check if the micro SD card could format to Fat32 or exFat, If the format
fails, you need to use a new micro SD card
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.