Vacmaster Respira UC0412EUK Bagless Upright Vacuum Cleaner User Manual

Respira UC0412EUK Bagless Upright Vacuum Cleaner
User Manual

Thank you for purchasing this Vacmaster ® vacuum cleaner. This is a vacuum cleaner intended for domestic use only and suitable for indoor use within a normal household environment for light, dry dust and debris.
FOR YOUR SAFETY: CAREFULLY READ AND UNDERSTAND ALL INSTRUCTIONS.

SYMBOLS

instructions may result in electric shock, fire and/or serious injury.
| Appliance in which protection against electric shock does not rely on basic insulation only but in which additional safety precautions are provided, such as double insulation or reinforced insulation, there is no provision for protective earthing or reliance upon installation conditions.
****| Do not dispose of electrical equipment in domestic waste.

SAFETY INFORMATION

READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
When using the equipment, a few safety precautions must be observed to avoid injuries and damage. Please read the complete operating manual with due care. Keep this manual in a safe place so that the information is always available. If you give the equipment to any other person, give them these operating instructions as well. We cannot accept any liability for damage or accidents which arise due to a failure to follow these instructions and the safety information.

• This machine is for dry and indoor use only.
• Never leave the appliance switched on unattended, if you leave the work area, switch the appliance off or unplug it from the power supply.
• Do not vacuum or use this vacuum cleaner near flammable liquids, gases or explosive vapors like gasoline or other fuels, lighter fluids, cleaners, oil-based paints, natural gas, hydrogen, or explosive dust like coal dust, magnesium dust, grain dust, or gun power, or toxic materials. Sparks inside the motor can ignite flammable vapors or dust. Do not vacuum toxic materials.
• This vacuum cleaner is not suitable for the vacuuming of asbestos or asbestos dust.
• Do not vacuum anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use the vacuum cleaner in a wet environment or to vacuum wet materials.
• Do not use steam cleaners, pressure washers or immersion in water to clean the vacuum cleaner.
• Ensure the hose and connections are always pointed away from the operator’s face, hair, ears and eyes during operation and never direct the nozzle towards persons or animals.
• Clear the working area of any items or possessions that you do not wish to be vacuumed before operation.
• Keep cord away from heated surfaces.
• Do not expose to rain. Store indoors only.
•  Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.
• Do not use with a damaged cord, plug or other parts.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners.
• Do not handle the plug or vacuum cleaner with wet hands.
• Do not use or store near hazardous materials.
• Do not use this vacuum cleaner with a torn filter or without the filter installed.
• Do not allow to be used as a toy. Close attention is necessary when used near children. Do not allow the appliance to be used by children.
• Do not try to touch the brush roll while the vacuum cleaner is switched on and the brush roll is spinning.
• Unplug from power supply when not in use or before carrying out maintenance.
• The machine should be disconnected from its power source during cleaning or maintenance and when replacing parts.
• Turn off the vacuum cleaner before unplugging from the power source.
• Do not cover the ventilation openings. Do not vacuum with any ventilation openings blocked; keep free of dust, lint, hair or anything that may reduce air flow.
• Keep hair, loose clothing, fingers, all parts of body away from openings and moving parts.
• If the supply cord is damaged, it must be replaced by the manufacturer, a qualified service agent or similarly qualified persons in order to avoid a hazard.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Besides the operating instructions and the binding accident prevention regulations valid in the country of use, observe recognized regulations for safety and proper use.
• Before starting work, the operating staff must be informed on – use of the vacuum cleaner. – risks associated with the material to be picked up. – safe disposal of the picked-up material.

UNPACKING AND PRODUCT FEATURES

ASSEMBLY

A flat-headed screwdriver is required for part of the assembly process.

1.  Remove all the contents from the packaging; make sure you have all contents as listed on page 7.

2.  Remove the pre-installed screw bolt with a screwdriver or a coin. Insert the handle assembly into the main body and secure with the screw bolt (Fig. 1).

3.  Insert the larger end of the extension wand into the top of the connection hose through the bracket until the wand is fully seated on the post (Fig. 2).

4. Insert the end of the flexible hose into the main body by aligning the UNLOCKED marks ( 1 ).
   Rotate the hose until the marks align with the LOCKED symbol ( 2 ). Run the flexible hose over the lower hose storage and the upper hose storage. Insert the suction hose end onto the top of the extension wand (Fig. 3).

5. Insert the combination tool onto the accessory storage post located on the back of the main body (Fig. 4).

6. Wrap the power cord around the upper and lower cord hooks (Fig. 5).
   NOTE: Make sure to wrap the power cord around the upper cord hook first, secure the power cord into the guide ( 3 ).

7. Secure the plug to the power cord (Fig. 6).
   WARNING: Wrapping the power cord too tightly with excessive stress on the cord may cause damage. A damaged cord is an electrical shock hazard and could cause personal injury or damage.

OPERATION

CAUTION: Moving parts! To reduce the risk of personal injury, DO NOT touch the brush roll when the vacuum cleaner is turned on. Contacting the brush roll while it is rotating can cut, bruise or cause other personal injuries. Always turn off before maintenance. Use caution when operating near children or pets (Fig. 7).
1. Power Cord – Release & Use

1. Turn the upper cord hook to either side to release the power cord (Fig. 8).
2. Detach the power cord plug from the power cord.
3. Be sure the power cord is locked into the upper locking notch ( 3 ) as shown (Fig. 9).
4. Plug the power cord into a power outlet.
5. Move the On/Off switch to the desired cleaning operation. Refer to page 9.
6. Once you have completed vacuuming, move the On/Off switch to the Off ‘O’ position and unplug the power cord plug from the outlet.
7. Return the upper cable hook into the upright storage position and wrap the cord loosely.

WARNING: If any abnormality/failure occurs, stop using the product immediately and disconnect the power plug.

2. Operation Modes
UPRIGHT MODE
NOTE: Make sure the vacuum cleaner is correctly assembled and the dust bin is empty before using. Do not operate a vacuum cleaner without filters in place.

1. Release the handle by placing foot on the floor head nozzle and pull back (Fig. 10).
2. To turn the vacuum cleaner on, press the On/Off switch to the desired position (Fig. 11).
   ‘O’ Power Off
   ‘I’ Hard floor, small area rugs and delicate surfaces. NOTE: The brush roll will not spin in this position.
   ‘II’ Carpets. NOTE: The brush roll will spin in this position.
   CAUTION: Do not allow the vacuum cleaner to remain in one spot for any length of time when the brush roll is turning. Damage to carpet may occur.
3. Once you have completed vacuuming, switch to the Off “O” position and unplug the power cord from the power outlet.
   NOTE: Do not allow the motorized floor head to be lifted away from the floor surface when vacuuming.
   The brush roll indicator status light:

the vacuum. Remove any blockages in the nozzle.
No Light| The brush roll is not active.

ABOVE FLOOR MODE

1. Place the vacuum cleaner in the upright locked position.
2. Release the flexible hose and/or extension wand (Fig. 12).
3.  Choose the desired extension wand/attachments (Fig. 13).

CAUTION: When using attachments, be careful not to over-stretch the suction hose to avoid causing the vacuum cleaner to tip over.
3. Attachments
NOTE: All accessories are compatible with both the flexible hose and extension wand. Included accessories will vary by model.

1. 3-in-1 Combination Tool
   Use a crevice tool for cleaning in tight spaces (Fig. 14).
   Use the dusting brush mode by sliding the adapter towards the end of the tool (Fig. 15). Ensure the locking button ( 4 ) is engaged. Use the dusting brush for cleaning loose or delicate surfaces. Press the locking button to remove the tool adaptor. Remove and flip the adapter to use the upholstery brush (Fig. 16). Use an upholstery brush for cleaning fabric surfaces. To return the combination tool to crevice tool mode, press the locking button and slide the adaptor back down the tool.
2. Pet Mate (only for UC0413EUK)
   Use Pet Mate to pick up pet hair and loose debris. Rotating brush roll powerfully, deep cleans dander out of upholstery and other surfaces (Fig. 17).
   WARNING: Never use the Pet Mate directly on pets.
   CAUTION: Moving parts! To reduce the risk of personal injury, DO NOT touch the brush roll when the vacuum cleaner is on. Contacting the brush roll while it is rotating can cut, bruise or cause other personal injuries.
   3. Suction Control
   The suction control is located on the flexible hose. This allows you to adjust the suction performance depending on the floor type.
   Rotate to “+” to increase suction.
   Rotate to “-” to reduce suction and increase maneuverability (Fig. 18).

MAINTENANCE

IMPORTANT! Unplug the power cord from the supply before performing any maintenance.
WARNING: Disconnect the electrical supply before servicing or cleaning the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury.
WARNING: There are sharp edges inside the motorized floor head to prevent hair entanglement. Do not put any part of the body into the nozzle when servicing or cleaning, or it may cause personal injury.
1. Cleaning Exterior And Attachments

1. To clean exterior or to reduce static electricity and dust build-up, wipe the outer surface with a clean, dry, soft cloth.
2. Wash attachments in warm soapy water, rinse and air dry.

2. Vacuum Cleaner Storage

1.  Replace flexible hose and attachments in storage position if necessary (see page 8).
2. Wrap the power cord loosely around the upper and lower cord hooks. Lock plug retainer onto the power cord.
3. Store the vacuum cleaner in a dry, indoor area, on the floor with the handle locked in the upright position.

3. Emptying Dust Bin
When emptying any vacuum cleaner, it is difficult to avoid exposure to dust. To minimize this risk, please ensure that you encase the dust bin in a large bag to empty it and close the bag as tightly as possible round the bin. Remove the dust bin and close the bag as tightly and quickly as possible and dispose of this immediately. It is advisable to wear disposable gloves and a face mask while emptying the cleaner. If at all possible, ask a non-allergy sufferer to empty the dust pot when required.
For best performance, empty dust bin after each use. Never operate vacuum cleaner without dust bin and filters in place.

1. To remove the dust bin, slide the dust bin release button and tilt forwards to release (Fig. 19).
2. Remove any debris that might be located in the suction port ( 5 ) (Fig. 20).
3. Position dust bin over the waste receptacle. Press the dust release button to open lid (Fig. 21).
4. To reinstall the dust bin, align the bottom of the bin with the slots on the bottom of the main body. Tilt back against the body until a click is heard (Fig. 22).

4. Pre-Filter Cleaning
The pre-filter is located within the dust bin. It is recommended to clean the pre-filter every three months to optimize performance.

NOTE: Make sure dust bin is free of debris before opening.

1. Remove the dust bin.

2. Press the dust bin lid release button (Fig. 23).

3. Grasp the pre-filter ( 6 ) and rotate counterclockwise (Fig. 24).

4. Clean pre-filter by gently tapping.
   NOTE: If necessary, rinse with cold water only. DO NOT use detergent or soap. Allow parts to dry 24 hours before putting back into vacuum cleaner. DO NOT wash in the dishwasher. DO NOT install damp.

5. Place the pre-filter back into the dust bin and rotate clockwise to lock into place.

6. Reinstall the dust bin into the main body.

5. Pre-Motor Filters
Regularly rinse the filters to maintain your vacuum’s suction power.
Rinse filters with cold water only. Allow all filters to air-dry for at least 24 hours before reinstalling them to prevent liquid from being drawn into electronic parts.
NOTE: When the cleaning of filters no longer restores vacuum cleaner suction to full power, or the filters are worn or broken, replace the filters. To purchase filters, contact the After Sales Helpline. It is recommended to clean the foam and felt filters with cold water every three months.

1. With the dust bin removed, take out the foam ( 7 ) and felt filter ( 8 ) (Fig. 25).
2. Wash with cold water only. DO NOT use detergent or soap. Allow all filters to air dry before reinstalling.

NOTE: DO NOT operate without foam and felt filters installed. DO NOT wash in the dishwasher. DO NOT install foam and felt filters if damp.

6. HEPA Exhaust Filter
It is recommended to clean the HEPA exhaust filter with cold water every year.

1. Remove the exhaust filter cover by pressing the release tab ( 9 ) at the bottom of the cover. Remove the HEPA exhaust filter (10 ) together with the foam filter (11 ) (Fig. 26).

2.  Wash with cold water only. DO NOT use detergent or soap. Allow to air dry. Allow parts to air dry before putting back into the vacuum cleaner.
   NOTE: DO NOT operate without an exhaust filter installed. DO NOT wash in the dishwasher. DO NOT install the filter if damp.

3. Replace the foam filter to the HEPA exhaust filter first. Then replace the HEPA exhaust filter with foam filter into the vacuum cleaner.

4. Insert the exhaust filter cover tabs (12 ) into the upper slots (13 ) and lock the filter cover into place by pressing the lower part of the cover until a click is heard (Fig. 27).

7. WrapFree Brushroll
The motorized floor head is fitted with a WrapFree brush roll, which actively removes the hair from the brush roll when vacuuming.
If you see any hair wrapped around the brush roll, continue cleaning, ensuring the On/Off switch is in ‘II’ position with the brush roll rotating on low pile carpets or tile floors. Hair will be removed from the WrapFree brush roll and be sucked into the dust bin.
If you hear a sound change when vacuuming, check for blockages or objects caught in the brush roll.

1. Turn off the vacuum cleaner and unplug the power cord.
2. Check and rotate the brush roll counterclockwise to remove the blockage (Fig. 28).

NOTE: If any fibers remain wrapped around brush roll, carefully cut them and remove them from the brush roll.
8. Pet Mate Cleaning (Only for UC0413EUK)
CAUTION: To reduce the risk of injury from moving parts, remove Pet Mate from vacuum hose or wand before servicing.
Cut any tangled hair, carpet pile and lint entangled around brush roll (Fig. 29).
9. Checking for Blockages
FLEXIBLE HOSE BLOCKAGE

1. Rotate the flexible hose until marks align as shown in the UNLOCKED symbol to remove the hose end (Fig. 30).
2. Check and remove any debris in the flexible hose.

CONNECTION HOSE BLOCKAGE

1. Press the release tab (14 ) on hose cuff and pull the connection hose away from the main body (Fig. 31).
2. Check and remove any debris in the hose.

EXTENSION WAND BLOCKAGE

1. Release the flexible hose first, then remove the extension wand (Fig. 32).
2. Check and remove any debris in the wand.

TROUBLESHOOTING

WARNING: Disconnect the electrical supply before performing maintenance to the vacuum cleaner. Failure to do so could result in electrical shock or personal injury.
Cleaning Performance
Vacmaster vacuum cleaners are tested for endurance. If your motor is operating, then the most The likely cause for a loss in suction is a blockage or an opening in the vacuum.
To maintain a high cleaning performance from your machine, it is important to replace or clean filters as necessary. Empty full dust cup to prevent performance drops. A performance drop with clean filters can only be caused by a blockage in the tools or the hose.

Plug in firmly, press the On/Off switch to -r or “I r position.
The OrVOff switch is not pressed to start the vacuum cleaner.| Press the On/Off switch to T or “II’ position.
Motor overheating protection during use.| Unplug the power cord and let the vacuum cool down for 50 minutes before restarting it for use.
Functional fault in the power cord,  switch, or motor.| Have the damaged part checked by qualified personnel or contact the after sales helpline.
Defective wall outlet.| Check with a good appliance or lamp. Be sure the power cord plug is fully plugged into a good wall outlet.
Dirt pick-up is poor or suction power is weak.| Full or clogged dust bin.| Empty the dust bin (page 11).
Filters need cleaning.| Follow filter cleaning instructions on page 11&12.
The flexible hose is worn.| Replace the hose Contact the after
sales helpline.
The brushroll is worn.| Contact the after sales helpline for assistance.
The foam and felt filters are dirty or worn.| Clean the foam and felt filters. Replace if they are worn or broken. Follow instructions on page 12.
There is a clog in the flexible hose or connection hose of the vacuum cleaner.| Check and remove all clogs. Follow the instructions on page 13.
PROBLEM| POSSIBLE CAUSE| SOLUTION
---|---|---
| Dust bin is not installed correctly.| Check dust bin for correct installation and ensure it is snapped firmly in place.
The hose or attachments are not installed correctly.| Check the hose and attachments for correct installation and ensure they are snapped firmly in place.
Suction control is in open position.| Adjust the suction control to increase suction. Follow the instructions on page 10.
Dust escapes from the vacuum.| HEPA exhaust filter is damaged and needs to be replaced.| Replace the exhaust filter. To purchase online at www.clevaeurope.com.
Dust bin is installed incorrectly.| Position dust bin correctly and snap firmly in place.
HEPA exhaust filter is installed incorrectly.| Check exhaust filter for correct installation. Follow instructions on page 12.
The brush roll does not spin.| The brush roll is jammed.| Turn off and unplug the vacuum cleaner, remove the obstruction, then turn on the vacuum cleaner.
The brush roll is not installed correctly.| Contact the after-sales helpline for assistance.
The belt is worn or broken.| Contact the after-sales helpline for assistance.
The belt is not routed correctly.| Contact the after-sales helpline for assistance.
Fault in the PCB section of the motorized nozzle.| Contact the after-sales helpline for assistance.
Overheat protector of the motorized nozzle is activated.| Wait the motorized floor head to cool down, and then restart.
Sound changes.| Attachments in use restrict airflow.| Check attachments for fuzz, lint, pet hair or other debris.
Blocked air path. clean the hose| Check for and remove any clogs and c
HEPA exhaust filter is installed incorrectly.| Check the exhaust filter and the exhaust filter cover for correct installation. Ensure the filter cover is snapped firmly in place.
PROBLEM| POSSIBLE CAUSE| SOLUTION
---|---|---
The vacuum turns off on its own.| The thermal protector is activated.| Turn the vacuum cleaner off and unplug it. Allow the vacuum cleaner to cool for a minimum of 50 minutes. Plug in a vacuum and turn it on.
The power cord plug is loose from
the outlet when using the vacuum.| Reinsert the power cord plug fully into the outlet. Avoid pulling or dragging the power cord when using the vacuum.
The motor is damaged.| Contact the after-sales helpline for assistance.
The brushroll status indicator light emits red.| There is a jam in the brush roll area.| Turn off and unplug the vacuum, and
remove any blockages in the nozzle.
Fault in the brush roll motor or PCB section of the motorized nozzle.| Contact the after-sales helpline for assistance.

TECHNICAL DATA

RECYCLING AND DISPOSAL

This marking indicates that this product should not be disposed with other household wastes. The machine must be delivered in rigid packaging to avoid damage during
transportation. The packaging and the machine itself are manufactured from recyclable materials and should be disposed of accordingly.

GUARANTEE

The following terms and conditions describe the prerequisites and the key terms associated with our manufacturer’s guarantee only and do not affect your statutory rights or the obligations of your retailer and your contract with them. All Vacmaster products are carefully checked, tested and are subject to our stringent quality control process.
Your Vacmaster appliance is automatically covered by an initially limited 2-year (24-month) guarantee against material and/or workmanship defects from the date of purchase. An extended 1-year (12 months) will be applied on top of the initial manufacturer’s guarantee period upon registering the product providing a total of 3-years (36 month) guarantee period at no additional cost. The extended warranty offer detailed is limited to residences within UK and Ireland.
The guarantee covers replacement parts and/or replacement of the product (at the manufacturer’s discretion) within the guarantee period. All claims must be accompanied by a valid proof of purchase. This guarantee excludes (at the manufacturer’s discretion) damage resulting from direct or indirect abuse, negligence, product misuse, accidents, unauthorized repairs or alteration and lack of maintenance.
How to register your extended Guarantee?
If you have purchased your Vacmaster product directly from our website, your product will automatically be registered for the full extended 3-year (36-month) period. If purchased from an independent retailer follow the information below. To benefit from your product’s extended guarantee period, simply register your product within 28
days of purchase . cleva-europe.com/register To register your extended guarantee, you will require the product’s model number and serial number which are located on the product rating label located on the vacuum cleaner and proof of purchase.![Vacmaster Respira UC0412EUK Bagless Upright Vacuum Cleaner

• fig 2](https://manuals.plus/wp-content/uploads/2022/06/Vacmaster-Respira- UC0412EUK-Bagless-Upright-Vacuum-Cleaner-fig-2.jpg)

What is not covered by the guarantee?

• Guarantee applies to the original owner and is not transferable nor does it carry a cash value.
• Appliances purchased from an unauthorized dealer.
•  Use of appliance not in accordance with the product instruction manual including careless operation or handling, misuse, abuse and/or lack of regular maintenance.
• Unauthorized use of the application or anything other than for domestic purposes e.g. For commercial or rental use.
• Accidental damage or faults caused by negligent use or care.
• Repairs or alterations carried out by unauthorized parties or agents.
• Normal wear and tear of parts and accessories, including normal wearing parts and consumables such as; Dust bin, Brush bar, filter(s) belt drive, fuses, batteries etc.
• Damage caused by blockages or other hazardous materials.
• The use of non-genuine parts and/or accessories.

|
---|---

UC0412EUK / UC0413EUK
Suzhou Cleva Electric Appliance Co., Ltd.
No.8 Ting Rong Street
Suzhou Industrial Park, Suzhou
Jiangsu Province, China
www.cleva-europe.com
Made in P.R.C

Documents / Resources

| Vacmaster Respira UC0412EUK Bagless Upright Vacuum Cleaner [pdf] User Manual
Respira UC0412EUK, Respira UC0413EUK, Bagless Upright Vacuum Cleaner, Respira UC0412EUK Bagless Upright Vacuum Cleaner
---|---

References

• Register Extended Guarantee – by Cleva
• Home - Cleva Europe

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>