Sony DJ Headphones Black Standard-Complete Features/User Guide

Sony DJ Headphones Black Standard

Specifications

• BRAND : Sony
• CONNECTIVITY TECHNOLOGY : Wired
• FORM FACTOR : Over-Ear
• PRODUCT DIMENSIONS: 10 x 8 x 6 inches
• ITEM WEIGHT: 1.35 pounds

Introduction

It has a Closed Design with 40mm Neodymium Drivers. It is Single-Sided Cable having Swiveling Ear Cups. The closed-ear design delivers excellent noise suppression and comfort. The 9.8-foot cord is not removable and ends in a gold-plated plug. Included is a 1/4-inch adaptor. These foldable headphones with a big diaphragm have a tough construction and a secure, very effective closed-ear design.

HOW TO USE

These headphones have a closed-back design and may be utilized for DJing as well as studio referencing. They have an exceptionally flat frequency response, making them ideal for music production, as well as excellent sound isolation, making them ideal for club DJing!

HOW TO USE HEADPHONES WITH A MIXER

To utilize headphones as a microphone, simply put your headphones into the microphone socket on the mixer. Headphones and microphones normally have the same 1/4″ jack plug connector, but if yours isn’t, you can use an adaptor.

HOW TO CONNECT BLUETOOTH HEADPHONES TO VIRTUAL DJ

Go to audio configuration, choose two soundcards, and set your Bluetooth as master and your computer soundcard as headphones. One word of advice: due to the time delay caused by the Bluetooth connection on your master out, you will have to beat match solely in headphones.

HOW TO ADD HEADPHONES TO VIRTUAL DJ

You must go to CONFIG to configure Virtual DJ to use your headphones. Unless you have external inputs and/or timecodes linked, you should leave the INPUTS box set to NONE. Set this to HEADPHONES in the OUTPUTS box to allow sound to be routed to both your speakers and your headphones.

Frequently Asked Questions

• Is it possible to DJ with Sony headphones?
  We tested the Sony MDR-7506 as the best headphones for DJs for around $100. These over-ear headphones boast a classic design and a lengthy coiled wire that prevents tangles when you’re on the move.

• DJs wear headphones in one ear for a reason?
  As a result, DJs frequently place one of the headphones against their ear. The cause for this is due to a forthcoming music track or a track that is about to be played in the headphones. They can listen to both the music going out of the speaker and the music coming in by placing just one side of the headphones close to their ears.

• Are noise-canceling headphones used by DJs?
  When it comes to ANC, though, most DJs prefer to use a different set of headphones. As The Verge learned through What’s In Your Bag, the Bose QC35s are a particular favorite, with its ANC being used by Rüfüs Du Sol, R3HAB, Peking Duk, Jon Hopkins, and others to relax on long-haul flights.

• DJs use earphones for a variety of reasons?
  DJs use headphones for a variety of reasons. DJs listen to the music track they’re about to mix into the music track that’s already playing on the speakers through headphones. DJs listen to the track by pressing the Cue button on the appropriate channel, which allows them to beat match the music to live performances.

• Is it true that DJs utilize wireless headphones?
  In a nutshell, wireless headphones can be used to DJ. The only additional equipment you’ll need is a Bluetooth transmitter with aptX low latency (since Bluetooth adds 150 mms latency) and no audio delay, as well as an audio cord that connects to your DJ controller.

• Why do musicians use headphones in the studio?
  When recording, musicians use headphones to reduce bleeding and to communicate with the producer and engineer (who are usually in a separate room). Musicians can also use headphones to listen to a metronome, control their own levels, and hear replay with an additional layer of production.

• When it comes to headphones, what’s the difference between studio and DJ?
  To summarize, DJ headphones are designed with DJs in mind. They aid in the mixing process, ensuring that all performances are of the highest quality possible. Studio headphones, on the other hand, are intended for musicians as well as casual users. They provide a more real-world listening experience.

• Why aren’t some DJs wearing headphones?
  Good DJs learn to “read” the music based on this data, changing EQ and other parameters instinctively and without having to listen as attentively. Whether they like it or not, they’ve succumbed to the dark art of wave-riding. Even if they don’t wear headphones, they’ll be able to mix flawlessly! Serato ITCH offers advanced wave riding.

• What do DJs do in the intervals between songs?
  The DJ can use the crossfader to blend or transition from one song to the next. The cue knobs or switches allow the DJ to “listen” to recorded music in headphones before playing it live in a club or on the radio.

• When DJs turn knobs, what exactly are they doing?
  Everything from effects to volume control on certain areas of the track is controlled by them. The “Bass EQ” knob, for example, can be used to lower the level of a song’s bass lines and bass drums, while the “Treble EQ” knob can be used to raise the volume of melody lines, guitars, and vocals.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>