ORIVER SW203 Smartwatch User Manual
- June 15, 2024
- ORIVER
Table of Contents
ORIVER SW203 Smartwatch
Product Information
Specifications
- Compliance: Part 15 of the FCC Rules
- Interference: Must not cause harmful interference
- Operation: Must accept any interference received
Product Usage Instructions
Introduction
Welcome to the product usage instructions for our device. This guide will provide you with detailed information on how to operate the equipment effectively and safely
Safety Precautions
Before using the device, please read and understand the following safety precautions:
- Do not make any changes or modifications to the device that are not expressly approved by the responsible party. Doing so may void your authority to operate the equipment.
- Avoid using the device in areas where its operation may interfere with other electronic devices.
- Keep the device away from water and other liquids to prevent damage.
- Do not expose the device to extreme temperatures or direct sunlight.
- Only use accessories and attachments recommended by the manufacturer.
Setting Up
Follow these steps to set up the device:
- Choose a suitable location for the device, ensuring proper ventilation and access to power sources.
- Connect the device to a power outlet using the provided power cable.
- Once connected, turn on the device using the power button located on the front panel.
- Wait for the device to initialize and display the startup screen.
Operating the Device
To operate the device, follow these instructions:
- Use the control buttons or touch screen to navigate through the device’s menu.
- Refer to the user interface guide for specific instructions on accessing various features and functions.
- Use the device’s remote control, if provided, for convenient operation from a distance.
- Ensure that you follow any additional guidelines or instructions provided in the user manual for specific operations.
Maintenance
Proper maintenance of the device is essential for optimal performance and longevity. Follow these maintenance guidelines:
- Clean the device regularly using a soft, lint-free cloth to remove dust and fingerprints.
- Avoid using harsh chemicals or solvents that may damage the device’s surface.
- Keep the device’s vents and openings clear of obstructions to prevent overheating.
- Refer to the user manual for any specific maintenance instructions or recommended cleaning procedures.
Troubleshooting
If you encounter any issues with the device, refer to the troubleshooting section of the user manual. If the problem persists, contact our customer support for further assistance.
Frequently Asked Questions (FAQ)
- Q: What should I do if the device does not power on?
- A: First, ensure that the device is properly connected to a power outlet. Check if the power cable is securely plugged in. If the issue persists, try using a different power outlet or contact our customer support for assistance.
- Q: Can I use the device outdoors?
- A: No, it is not recommended to use the device outdoors as exposure to extreme temperatures, moisture, and direct sunlight can damage the equipment.
- Q: What should I do if the device emits a strange odor or smoke?
- A: Immediately turn off the device, unplug it from the power source, and contact our customer support for further instructions. Do not attempt to repair or use the device again until it has been inspected by a professional.
FRONT BACK VIEW
Connecting &
Pairing
Use your phone to scan the following QR code, and download and install the Da Fit app. For the best user experience, update the app to the latest version as prompted. Keep the phone Bluetooth is on.
Go to app Device >Add device to connect the device to your phone.
Getting started
Power on
Long press the button to turn on the screen and go to the start screen. If turning on the watch by long pressing the button doesn’t work, charge the watch and try again.
Shutdown
When the device is on, long press the button for 5 sec to go to the power menu to shut down or restart the watch. Charging This product charges via a magnetic charging cable. Align the charging port on the back of the watch with the metal contacts on the charging base, and wait until the charging level indicator appears on the watch screen.
Note:
Use the original charging cable and ensure the charging port is dry.
Wearing & Replacing Watch Strap
Put the strap on with comfortable looseness to allow the skin to breathe and the sensor to function. You can tighten the watch strap during the workout and loosen it afterward. Tighten the strap appropriately if your watch is always on your wrist or fails to output data. To change the watch strap, refer to the illustration below:
Functions available when the watch Is connected to the phone
App alerts
Keep the watch connected to your phone to receive phone app alerts on your watch. You can swipe up on the Watch the face page to view the latest 8 alerts in the Notification Center.
Setting method:
Keep the watch connected to your phone, start the app, and go to Notification. Here, you can select Phone/Messages etc. for which the app alerts function needs to be enabled.
Note:
To enable this function on an Android phone, you need to add the app to the whitelist or auto-run list in the phone background so that the app always runs in the background. If the app is killed by the phone’s background process, the watch will be disconnected from your phone, and you cannot receive app alerts on the watch.
Phone Call
Pair the watch with your phone, you can use the watch to dial and control the phone to make and receive calls. You need to keep the connection between the watch and the phone when using the phone call function.
Find Mobile/Watch
- Keep the watch connected to your phone.
- In-app list> Find device, your watch will have a tinkling sound.
- Swipe right to preview the watch faces> Find phone, your phone will have a tinkling sound.
Watch Face Gallery
- Wake up the watch face, and long press the watch face page to go to the watch face selection page.
- Swipe left or right to preview the watch faces available to the watch, including built-in watch faces and synchronized online watch faces which you chose from the app Dial market.
Shortcuts
control center On the watch face page, swipe down to go to the control center for the following system functions.
Various functions with shortcuts
Swipe up/down on the watch face to go to the smart assistant page, which supports the easy use and view of various functions and information.
Activities and Health
Exercise The watch supports 33 sports modes, wake up the watch, and press
the physical exercise page to start a new training measure recording. View
data: During a workout, you can swipe up or down on the screen to view
different data. When you stop a workout, the workout data is not saved if the
distance is too short or the workout time is too short.
Activity data
The watch automatically records your activity data, including steps, calories, and distance. When a target is achieved, the watch vibrates to congratulate you.
Heart Rate
Heart rate is an important indicator of physical condition. Highly-frequent
heart rate measurement helps capture more heart rate changes and provides a
reference for a healthy lifestyle.
Wake up the watch, Swipe the screen left or right, then select the heart rate
app, tap to start measuring. You can also view measurement results for the
whole day on app. Also, you can go to the Dafit app >other >Health to choose
the turn on Full-day heart rate option, However, once turned on, the battery
consumption will speed up, affecting the length of use, so please turn it on
as needed.
Sleep
Keep the watch connected with your phone, the watch will automatically monitor sleep breathing quality when it detects that you wear the device during sleep.
SpO2
Blood oxygen saturation (SpO2) is an important physiological parameter of
respiration and circulation. Wake up the watch, Swipe the screen left or
right, then select the SpO2 app, tap to start measuring. You can also view
measurement results for the whole day on the app.
BP
Blood pressure is an important physiological parameter of respiration and circulation. Wake up the watch, Swipe the screen left or right, then select the BP app, tip to start measuring. After the measurement is complete, the result will be displayed on the watch. You can also view measurement results for the whole day on the app.
Stress
Wake up the watch, Swipe the screen left or right, then select the Stress app, and tap to start measuring. After the measurement is complete, the result will be displayed on the watch. You can also view measurement results for the whole day on the app.
Multimedia Function Alarm
You can add alarms in the app and on the watch. Alarms can be repeated, enabled, or deleted. Tap alarms that are no longer needed to delete them. When the preset time for an alarm arrives, the watch will vibrate as a reminder. You can choose to nap or turn it off. If you choose to nap, it will vibrate again after 10 mins. You can only use this function 5 times per alarm.
Weather
You can check today’s weather, wind, and other information at any time. The weather data needs to be synchronized through the mobile network. Therefore, you need to keep the watch connected to your phone to keep weather information up to date.
Play Music
Swipe the screen to find the Play app, and control music playback on the watch apps or phone apps during your workout.
Stopwatch
The stopwatch begins counting time from zero. You can then perform the activity or task you want to time, and when you are finished, you can press the stop button. The stopwatch will then display the elapsed time between the start and stop points.
camera
Keep the watch connected to your phone. In-app list, turn on Shutter and shake the watch, the device can control your camera to take photos.
Cycle Tracking
In App list, Turn on other > Health> Physiological cycle reminder to set period information. Swipe the screen to find the period app to check more details.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>