SENDEM G10 Truly Wireless Earbuds User Manual
- June 6, 2024
- SENDEM
Table of Contents
User Manual
Thank you for purchasing this product, this product has a fashionable appearance and high-end sound quality. Before using this product, please read and strictly follow the instructions and precautions, and keep it for future reference.
PRODUCT DIAGRAM
Pls full charge the earbuds and charging box before first use!
Product description:
- After taking out the earbuds from the charging box, the earbuds will turn on and pair automatically, the mobile phones can search the earbuds devices and use them directly(The first search will take Ss)
- Please charge the earbuds and charging box with a 5V adaptor, It is prohibited to use a fast-charging adaptor or any other adaptor which a voltage over 5V.
- When the earbuds can not be charged when put into the charging box, pls kindly check if the charging box has power or not firstly, then please wipe off the charging pin with a rag and put the earbuds into the charging box again to charge the earbuds.
- When the earbuds are abnormal in the process of using, for example, there is only a single channel is working, please put two earbuds into the charging box for 3-4s, then take them out to get pairing again.
- The two earbuds in this product can be workable separately, after connecting with mobile phones, if turned off one of the earbuds, the other one can be workable continuously.
| Bluetooth Earbuds | Charging Box |
|---|
Earbuds Model: TL1721
Bluetooth version: BT5.0
Earbuds battery: Li-polymer 35mAh
Playing time: 3-4hrs
Stand-by time: 40-50hrs| Battery capacity: 300mAh
Charging voltage: DCSV
Charging current: 300mAh
Discharging current: 500mAh
Charging port: Type-C/Touchable magnetic pin
Warning: It is strictly prohibited to place the product in an overheated or undercooled place. The temperature higher than 50 t or lower than 10 t will affect the battery performance.
Hearing Protection:
Do not use It at high volume for a long time to prevent hearing damage.
Do not adjust the sound too large, in case you cannot hear the surrounding
sound.
Do not use it while driving.
Starting/Pairing/Connecting
Starting
Taking the earbuds out of the charging box, the LED flashing indicates earbuds
start on automatically.
At the status of switching on, long touch the left/right button for 3s to turn
on the earbuds
At the status of switching off, long touch the left/right button for 5s to
turn off the earbuds
Pairing
Earbuds get paired automatically when taking the earbuds out of the charging box, White indicator fast flashes when the earbuds are pairing, once the pairing is finished, the red and blue indicators alternately fast flash, and the earbuds get into the pairing mode to connect with mobile phones, White indicator keep lighting on after the earbuds connected with mobile phones. (The earbuds are paired before ex-factory under normal circumstances)
Connecting
Auto connection: Take the earbuds out of the charging box, wait for 2-3s
for earbuds pairing, Open your Bluetooth devices and search “G10”, and choose
and get a connection.
If connecting fails, turn off the mobile phone’s Bluetooth function and re-
open it again.
Charging
Earbuds charging
The red indicator keeps lighting on when charging the earbuds Indicator light off when the earbuds are fully charged.
charging box charging
The red indicator flashes slowly when charging the charging box.
The red indicator keeps lighting on when the charging box is fully charged.
Charging port Type-C
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>