ANGELS HORN

ANGELS HORN Vinyl Record Player, Hi-Fi System Bluetooth Turntable

Players with Stereo

Specifications

• BRAND: ANGELS HORN
• CONNECTIVITY TECHNOLOGY: Wireless, Wired
• COLOR: Wood
• MATERIAL: Plastic
• SIGNAL FORMAT: Digital
• PRODUCT DIMENSIONS: 16.54 x 14.17 x 4.92 inches
• ITEM WEIGHT: 24.9 pounds
• POWER: AC power adaptor, DC output 15 V 2.4A
• SPEAKER: 40 18W X 2
• TURNTABLE SPEED: 331/3, 45 RPM
• SPEED VARIANCE: 1.5%
• WOW AND FLUTTER: 0.15%
• SIGNAL TO NOISE: 72 dB
• DOWNFORCE RANGE: 3.0-6.0g
• EFFECTIVE TONEARM LENGTH: 8.6″ (218.5mm)
• OVERHANG: 0.73″
• LINE OUT: 180mV(1KHz-10Db,33RPM)
• PHONO OUT: 2.5mV(1KHz-10Db,33RPM)

Introduction

The sound quality was prioritized in our finances and technical efforts for this vinyl record player. Consider how impressed your guests will be by this record player’s sleek design and pleasant, distortion-free speakers. You will believe it is a record player worth possessing at that point. When it comes to the sound quality of this old vinyl record player, you can count on its feeling of realism, high-end AT brand phono cartridge, well-made woods, instrumental authenticity, and detail that less expensive versions simply can’t match.

This set of vinyl record players with 2 bookshelf speakers is also an outstanding décor to have, and the natural wood look design fits nicely with your bookshelf or furniture. They won’t take up a lot of room in the room and won’t conflict with the rest of the furnishings. Built-in Bluetooth 4.2 input for playing music from other mobile devices (digital music), phono preamp and RCA line output, sturdy iron platter for reducing vibration, adjustable counterweight force to avoid skipping and distortion, 2 speeds (33 1/3 & 45RPM), easy to install and use.

ITEMS IN THIS PACKAGE

Before throwing away any packaging materials, please check thoroughly and make sure you find the following items that come along with this package:

• Turntable
• Turntable Lid
• Turntable Slip Mat
• Turntable Platter
• 45 RPM adapter
• Tonearm Counterweight
• Drive Belt
• Cartridge Alignment Protractor
• Power Adaptor
• Speakers
• Speaker Wire x 2

PRODUCT DIAGRAM

1. Hinge
2. Drive Pulley
3. Drive Belt
4. Turntable Spindle
5. Turntable Hub
6. Turntable Platter
7. Tonearm Lift
8. Tonearm Counterweight
9. Downforce Scale Dial
10. Cue Lever
11. Hold Down Clip
12. Tonearm Rest
13. Function Knob
14. Tonearm
15. Volume Knob
16. Speakers
17. Ground Connector
18. RCA Jacks
19. Phono/Line Switch
20. Power Jack
21. Speaker Output Terminals
22. Power Switch

INITIAL SETUP

ESSENTIAL SETUP

1. Place the unit on a flat and level surface. The selected location should be stable and free from vibration.
2. Install the turntable lid on the hinges.
3. Remove the tie-wrap that is holding the tonearm.
4. Install the turntable platter and drive belt accordingly.
5. Place the slip mat on top of the turntable platter.
6. Slide Tonearm Counterweight onto the tonearm and twist it lightly onto the rear shaft of the tonearm.
7. Adjust the counterweight to set proper stylus pressure.
8. Connect the AC adaptor to the Power Jack of the unit.

NOTE
 Do not plug the AC power adaptor to the power outlet before all the assembly is completed. Before turning the power on, make sure again all the connection settings are correct. Always turn off the power when connecting or disconnecting.

TONEARM COUNTERWEIGHT ADJUSTMENT FOR STYLUS PRESSURE

1. Remove the stylus protector from the cartridge and avoid touching the stylus tip during the adjustment.

2. Release the tonearm Hold Down Clip, gently hold the tonearm and move it away from the Tonearm Rest. At this point, the tone arm is unbalanced and free to swing.

3. Lift up the Tonearm from its rest and gently hold it. The tonearm is unbalanced at this point.

4. Carefully rotate the Counterweight towards the front of the turntable until the tonearm is horizontally balanced and hovers freely just above the platter without the stylus touching the platter surface.

5. Return the tonearm to the Tonearm Rest and lock the Hold Down Clip.

6. While holding the counterweight steady without any rotation, rotate carefully only the Downforce Scale Dial until the “O” on the scale lines up with the centerline marked along the top of the tonearm.

7. Rotate the counterweight including the downforce scale dial counter-clockwise (as seen from the front of the turntable) to adjust the pressure to the stylus manufacturer’s recommendations.

NOTE:

• Each mark on the scale represents 0.05 g (gram).
• The recommended pressure for the factory-installed cartridge is 3.5 g.

NOTE
The cartridge only goes up to 1.75g. You will need to make two full rotations to reach 3.5g.

TURNTABLE PLATTER AND BELT SETUP

1. Put the drive belt around the Turntable Hub, and then use the provided drive belt assembly tool to help pull the belt to fit around the slot of the motor pulley.
2. Place the turntable platter through the turntable spindle.

STEREO SYSTEM CONNECTION

RCA JACKS

• The RCA jacks of this unit are shared as both the Phono output jacks and the Line output jacks. They are determined by the Phono/Line Switch.
• When used as a Line Output, the jack’s output analog line-level signals could be connected directly with a pair of active speakers or the appropriate input of your stereo system.
• When used as a Phono Output, they should be connected to the phono pre-amp or the phono input of the stereo system.
• The Red plug connects with the Right channel and the White plug connects with the Left channel.

NOTE

• If the Phono/Line switch is set at LINE position but RCA jacks are connected to the stereo system’s phono input, the sound might be distorted due to input overload and could damage your stereo system.
• If the Phono/Line switch is set at the PHONO position but the RCA jack is connected to the stereo system’s line input, the volume will be very low due to lacking signal pre-amplification.
• RCA Jack is not designed to be connected directly to the passive/unpowered speakers and if it does, the volume will be very low.

SPRING CLIP SPEAKER TERMINALS

The spring-clip speaker terminals deliver amplified, speaker-level signals as output and should be connected with the passive speakers.

BLUETOOTH OPERATIONS

1. Turn the Function Knob to Bluetooth mode, you will hear an activation sound from the unit.
2. Turn on the Bluetooth feature of your audio device, search for “Angelshorn 05” and pair.
3. Once your device is successfully paired with the unit, you will hear a short confirmation sound from the unit.
4. Play and stream music from your device to the unit.

NOTE
Bluetooth version – 4.2

TURNTABLE OPERATION

1. Press the Power Switch to turn on the power.

2. Set the Function Knob accordingly.

3. Place the record on the turntable. Use the 45 RPM Adapter if necessary.

4. Remove the stylus protector from the stylus assembly.
   NOTE
   To avoid stylus damage, make certain the included stylus guard is in place whenever the turntable is being moved or cleaned.

5. Release the tonearm Hold Down Clip.

NOTE
 when the turntable is not in use, remember to lock back the hold-down clip.

6. Use the Cue Lever to lift up the tonearm.
7. Gently move the tonearm over the record where play is desired to begin. Set the Cue Lever back to the down position, the tonearm will descend slowly onto the record and begin to playback.
8. When the record is finished playing, use the Cue Lever again to raise the tonearm and then return it to the Tonearm Rest. Release the lever to let the tonearm sit back at its rest. To suspend the playback, repeat the same steps.
9. Lock the Hold Down Clip to secure the tonearm.

NEEDLE REPLACEMENT

REMOVING NEEDLE

1. Gently pull down the front edge of the needle.
2. Pull needle forward.
3. Pull out and remove.

INSTALLING NEEDLE

1. Position the needle with its tip facing down.
2. Line up the back of the needle with the cartridge.
3. Insert the needle with its front end at a downward angle and gently lift the front of the needle upward until it snaps into place.

TURNTABLE MAINTENANCE

1. Do not touch the stylus tip with your fingers. Avoid bumping the stylus on the turntable mat or a record’s edge.
2. Clean the stylus frequently with a soft brush with a back-to-front motion only.
3. Clean the records to get rid of dust or grease with a record cleaning brush and record cleaning solution.
4. Clean the turntable lid and turntable cabinet with a slightly damped microfiber cloth.

NOTE
 Do not use cleanser that contains alcohol, benzene or any other harsh chemicals, which might damage the paint and finish of the turntable.

Frequently Asked Questions

• What’s the deal with my vinyl not playing?
  While dirt or dust on the record is the most likely cause, you could also have a balance issue. You may need to improve the balance of the arm or the stylus cartridge if it is not balanced properly. The technique of re-balancing your arm or cartridge may differ depending on the record player you own.

• What’s the point of putting a penny in a record player?
  Pennies serve as anchors, allowing the needle or stylus to be grounded to the vinyl record. This “penny on the record” motion usually occurs when the needle in the turntable is damaged or stressed, causing it to not thread properly into the grooves of the vinyl.

• Do you keep the record player’s felt?
  While your record is playing, you can store the felt cover inside the record jacket. Even if your turntable has a plastic cover, it is always a good idea to utilize both when not in use. Using both will ensure that no dust or scratches occur, causing any components to be damaged.

• Are GPO turntables of decent quality?
  For those looking to purchase a new vinyl record player, the GPO Stylo is an affordable and high-quality option. It has a nice appearance, a pleasant sound, and provides excellent value for money. There isn’t anything to criticize about this fantastic product.

• Why isn’t my record player playing music?
  If your turntable does not have an internal preamp, make sure the external preamp is turned on and that all RCA and grounding cables are securely connected. Check to see if your speakers or amplifier are turned on. Remove the stylus protector (1) from the stylus (2) before playing back. Make sure it doesn’t come off with the stylus.

• What’s the best way to get my record player to work?
  Turn on the power and place a record on your turntable. Typically, the power switch is found under the turntable, on top of the turntable, or on the motor. Remove the tonearm from its rest and check that the cueing lever is up. Alternatively, if you have a completely automatic turntable, simply move it.

• How can you tell if your turntable is malfunctioning?
  There are audible and physical signs that indicate when your stylus needs to be replaced. On the audible side, if your stylus is old or damaged, your records will not sound as well. More distortion, crackling, static, and overall fuzziness will be heard.

• Do record players on the cheap skip?
  Again, this degrades the sound quality of your vinyl recordings and damages the grooves. The needle will also skip across the record as a result of this. Crosley, Jensen, 1byone, ION, and other brands that import these cheap turntables from China have a well-known problem.

• Do record players cause records to be ruined?
  These things generate wear and tear that isn’t immediately noticeable. It’s subtle, but if you play a record a lot and put a lot of pressure on the cartridge/stylus/needle, the record may ultimately show noticeable damage in the form of “groove wear,” which appears as white discoloration in the grooves.

• Is it possible to handle vinyl records?
  Only hold the vinyl record at its outside borders to prevent your body oils from transferring onto the record’s surface. If you touch the record’s surface, you run the danger of getting dirt on it and maybe destroying it.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>