Wireless Earbud, Bluetooth 5.3 Headphones with 4 Microphones-Complete Features/User Manual

: June 5, 2024
: Xinwld

Table of Contents

Xinwld

Xinwld

Wireless Earbud, Bluetooth 5.3 Headphones with 4 Microphones

Wireless-Earbud-Bluetooth-5.3-Headphones-with-4-Microphones-
immgg

Specifications

BRAND: Xinwld
COLOR: White
CONNECTIVITY TECHNOLOGY: Wireless
FORM FACTOR: Over-Ear
PRODUCT DIMENSIONS: 1.93 x 2.13 x 0.91 inches
ITEM WEIGHT: 0.141 ounces
BLUETOOTH VERSION: 5.3
SUPPORT: HSP/HFP/2AVRCP
CHARGING PORT: type C
BATTERY CAPACITY: earbuds;25 mAh
BATTERY LIFE: 5 hours
CHARGING TIME: 1 hour
TRANSMISSION RANGE: 15 meters

Introduction

The Bluetooth 5.3 high-performance processor in the wireless earphones enables faster transmission speed, stronger connection stability, and a longer Bluetooth range (Up to 15m). You can enjoy crystal clear music with amazing accuracy and clarity thanks to an innovative chip with AAC and SBC audio codex and premium 13mm dynamic speakers. Get rid of the cord and enjoy full wireless freedom. The wireless headphones feature ENC noise cancellation technology and a four-microphone design. Two built-in microphones in each earbud use ENC noise cancellation to provide clear and true sound, allowing you to have high- quality conversations whenever and wherever you want, just like you would if you were speaking face-to-face. You’ll have more smooth and clear calls than ever before, with no worry about the other party’s lack of understanding. Earbuds that are wireless are small, light, and pleasant. Each earbud is under 4g in weight, and the ultra-light and ergonomic design allow you to wear them for long periods of time without discomfort. The earphones in your ears will be forgotten due to their small weight. The charging case is 2.151.950.91 inches and weighs 0.1 pounds. There will be no strain if you exercise vigorously while carrying the charging case in your pocket.

Hall switch is used in Bluetooth earphones. The earphones will automatically pair and reconnect to the most recently connected Bluetooth device when the lid of the charging case is opened. The charging case’s lid must be closed once the earphones have been placed in it to terminate the Bluetooth connection and allow the earphones to charge. Both the left and right earbuds could individually connect to the smartphone. It just takes 1 hour to charge the charging case using UCB-C quick charge. The Bluetooth earbuds may last up to 5 hours on a single charge and up to 20 hours with the charging case. The digital component of the LED panel displays the percentage of the charging case’s real-time battery remaining. The charging box’s power status can be accurately controlled. (Please charge it completely before using it for the first time.)

TABLE OF PRODUCT CONTENTS

INTRODUCTION

HOW DO I PAIR TWO HEADPHONES WITH MY PHONE?

Please make sure both the earbud& and the charging case are fully charged before first use

STEP 1

Take both out Of the Charging Case and both will power on and start pairing automatically (If the earbuds are not connected to your device for more than 5 minutes, the earbuds will automatically turn off press the M FB button for about 3 seconds to the earbuds when prompted “Power on”.)

The indicator light of one earbud will flash red and blue alternately, and the indicator light Of the Other Will Slowly flash blue when paired successfully

STEP 2

Enable the Bluetooth pairing mode on your phone device, and search select to Connect (You should hear a voice prompt “connected” when wearing earbuds).

If the indicator light of the earbud is off, it means the phone is connected

AUTOMATIC CONNECTION

By default, the earbuds will connect to the last paired mobile automatically when powered on.

PROMPT

If you have any problem pairing the two earbuds with your phone, put the earbuds back in the charging case and repeat the Steps.
These Can be not together, but also individually

If you want to use a single earbud:

Just take it out Of the Case and Connect it to the phone.
or when using two earbuds, manually turn off one earbud or put one back in the charging case and you’ll be able to use the other one ear-bud alone.

FUNCTIONS

TELEPHONE COMMUNICATION

ANSWER CALL: Tap once
HANG UP: Press and hold the key for 2s
REFUSE INCOMING CALL: Press and hold the key for 2s
FOR MUSIC
PLAY/PAUSE: Tap twice
PREVIOUS TRACK: Press and hold “L” for 2s
NEXT TRACK: Press and hold for 2s
ACTIVATE SIRI: Quick tap for three times
TURN DOWN VOLUME: Single tap on left earbud
TURN UP VOLUME: Single tap on right earbud

CHARGING

EARBUDS CHARGING

The Will be Charged When you correctly place in the charging slots and close the lid. (You can charge the charging case and the earbuds at the same time, Or you can charge the charging case first and then the earbuds_)
The charging case will stop charging automatically and the indicator light on the earbuds will go out when fully charged.
When the earbuds are charging in the charging case, the digital display bar Of the Case Will keep blinking and turn Off after 60 seconds.

CASE CHARGING

There is a “Type-C USB charging cable in the package, please use it to Charge the Case directly.
During charging, the digital display will flash and display the battery level in real-time. When fully charged, the number shows 100.

CHARGING ALERTS

After using it for a period Of time, to oxidation Of the magnet connector, the earbuds might not be charged or even turned
You Can fix this problem by Cleaning the Connectors on the ear-buds and charging case with an alcohol wipe
Put the earbuds in the charging case, the earbuds will turn off immediately and the charging case will start to charging automatically.

The earbuds will Connect to the last paired mobile automatically

STORAGE AND MAINTENANCE

If the earbuds have not been used for more than 3 months, we recommend that you charge it.
Please use a charger approved by FCC.

**FFC

** (Federal Communications Commission).

Do not dissemble the earbuds.
Children aged 12 and under require adult supervision.
Do not expose the earbuds to high or low temperatures, and do not use the earbuds during a thunderstorm.
Avoid free fall or violent shock to the device. Keep the device away from sources of fire and do not place the device in water.

Frequently Asked Questions

Why don’t these earbuds pair with my phone?
Make sure the earbuds are fully charged and powered on. Make sure your phone’s Bluetooth is enabled If there is no problem with the two points stated above, turn off the powered-on earbuds after 5 continuous and quick clicks. Put them back into the charging case and close the lip, wait for 1 minute, then open the charging case and reconnect the earbuds to the phone.
Why does the music cut in or out?
First. keep the than 49 feet (no obstacles). If the distance is less than 49 feet, follow these steps:
Put the earbuds back into the case and close the lid, manual click “forget the M D026” your|
After 10 seconds, open the charging case and reconnect these earbuds with your phone
Why the earbuds still won’t be charged or disconnect from the phone after I put them in the case and close the lid?
Make sure the charging case is not in a low battery State. If the Charging Case is in a low battery State, the earbuds will neither be charged nor disconnected. In this case, please use a type-c charging cable to fully charge the case.
Are these earbuds sweat- and water-resistant?
These earbuds are sweatproof and slightly waterproof. For electronic devices, we do not recommend that you submerge the earbuds in water.
When my wireless earphones are fully charged, how do I know?
When your earbuds are plugged in and charging, the charging case will blink red. The LED will stop flashing and become solid red once fully charged.
What’s the best way to make my wireless earbuds operate together?
Reset your earbuds (red lights blinking), then place them back in the case and wait about a minute before pulling the right one out first and allowing it to fully turn on, then pulling the left one out and allowing it to do the same.
Is it possible to use the earbuds separately or do they have to be used together?
Yes, you are allowed to utilize one at a time. I’ll leave one in the case and use the other on occasion. Yes, removing one will halt your music/video, however, double-tapping the earpiece in your ear will continue it.
How long does it take to charge genuine wireless earbuds?
The earphones take around 2 hours to fully charge. If the battery is low, charging it in the charging case for 10 to 20 minutes can give you an extra hour of use. Connect the charging case to a USB power source or an approved wall charger.
When not in use, can I store wireless earbuds in a charging case?
When not in use, can I store wireless earbuds in a charging case? Yes. They won’t overcharge or be harmed in any way, and you’ll be less likely to misplace one if you make it a practice to always put them back in the case.
What does the blue light on earbuds indicate?
The headphones may be in pairing mode if they have a slow pulsing blue light. Blinking red and blue is the most popular light pattern for pairing mode. However, you should try pairing your headphones with another device to check whether the flashing blue light goes away after the device is linked. Interference is a possibility.