GLAMOUR BZJ001 White Noise Device Instruction Manual
- June 5, 2024
- Glamour
Table of Contents
GLAMOUR BZJ001 White Noise Device
Overview
- White noise function
- Night light function
- Colorful lights function
- The Clock function
- Bluetooth speakers
- Music rhythm function
- Headphones function
Directions For Use
- While plug the USB cable, short press (short press < 2 seconds, the same blow) to turn on the device, voice play” Power on” and shows the clock.
- When the device is working on, press the on/off button to turn off the device and memorize the current music and volume to enter the standby state. If the clock is on, it will still display the clock.
- In working state, long press (hold for 2 seconds, the same below) on on/off button to enter shutdown state, voice play” Power off”.
- Child lock function: When the device is in the current working state, press the button together for 2 seconds, the device will enter the locking state, the voice will play “lock” when the device is locked, press other keys is invalid
- Child lock unlock: When the device is locked, press the button together for 2 seconds to unlock the device and voice play “unlock”..
- adjust the volume (brightness and time) upward, adjust the volume in play mode, adjust the brightness in night light or atmosphere light mode. and adjust the time in clock state.
- Down to adjust the volume, brightness, time, play mode sort of volume, night light lamp or atmosphere model sort of brightness, set the clock state sort of time.
- Time on and off: When plugged in, press the “on” key to power on, the clock will display the current time.
- While the device in on, press the clock button in standby state (when no light or music is played) to turn on or off the clock display
- Adjust clock: standby long press 2 seconds, the clock, enter the clock setting function, first of all, the clock (flash), and then through the “” and” – “button to set the time, short press the clock button to enter again set the minute hand (flash), press the clock button for 2 seconds or longer after no action to save the current time interval for 10 seconds, and exit the clock setting function.
- Timing function: when turn on the light or local music, press the clock button, timer for 15, 30, 60, 90, and 120 minutes (LED accordingly instructions), each are switched on by default for the timing.
Local music playing
- When the device is on: press “Music button”. “Weather button” and “White noise button”, the device starts to play the same song (corresponding to music, natural sound or white noise) repeatedly, and the display prompt “ONE“ indicates the single cycle.
- With memory function when shutting down, memory of the track and volume when shutting down, when the user enters again directly play the selected tracks and volume before shutting down.
- Long press “music” and “Weather” “white noise” button, the device will be effected according to the light music or natural music or white noise in the list of ALL tracks corresponding looping, screen prompts “ALL” said the whole song cycle, short by a single loop current tracks again.
- Play the local store music, will not open the music rhythm function.
- When playing music through short press clock timing set, in time to shut down automatically after the current play songs and music and memory volume.
Lighting options
- When the device is on, press the light button to turn on the night light function
- Switch the light in a short time. The lighting sequence Is: warm light, blue light, red light, green light, blue + red, blue + green, red + green, blue + red + green, colorful breathing, colorful horse running, and lights off.
- Turn on the light condition long press lights, directly to turn off the lights, or short press the open key until shut the lights turn off the lights and gear
- Lighting brightness is divided into three gears: high, middle and low. When the light is on, it is high by default. When the light is on, the LED brightness can be adjusted by and button.
- When the lights by short press clock timing set, in time to shut down automatically after the
- In standby mode (lights and sound did not work when the device is turned on), tap the device to automatically light up the night light (the brightness is the same as when it was turned off last time). After turning on the light, long press the light button to turn off the light directly, or short press the on key until turning off the light.
Bluetooth play
After the Bluetooth is connected to the device, if the Bluetooth device start to push music, it will automatically switch to the Bluetooth play mode, and the voice play “connected” will be displayed when connecting. When Bluetooth plays music, it will automatically turn on the music rhythm lighting effect and move quickly according to the music When Bluetooth music is playing, press the light button to turn off or on the rhythmic light.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.