Level 7 Motorsports C10 Extended High Hump Cover Instructions
- June 5, 2024
- Level 7 Motorsports
Table of Contents
Product Instructions
Level 7 Motorsports
High Hump Instructions, 1967-72
Thank you!
Thank you for purchasing a product from Level 7 Motorsports! We have been in business since 2001 and have built a very diverse list of completed projects. Some of these projects have shown us a need for certain parts in the market. We are very passionate about what we do and are fortunate enough to be able to share some of these parts with you.
Product Information / Installation
Our high hump transmission cover is a reproduction of the factory high hump cover, but extended further back to completely cover a Tremec T56 Magnum 6 Speed transmission. You will also have room to get the transmission up high enough to get pinion angles correct on a truck that has been significantly lowered. Below is a photo showing a factory low hump floor. You can see in the photo that there is a raised area to the rear of the transmission tunnel, just under the bench seat. The new cover will be set on top of this area.
In the next photo you will see a factory high hump cover that we extended to
fit over a T56 magnum. This photo will also show you the locations of each
fastener. The cut line on the floor is fairly self explanatory but we do
recommend cutting a rough opening a bit too small at first.
Set your new high hump cover down on the floor and mark the outside diameter as well as the hole locations. Once you have made your mark, you will be able to drill holes and make your final clean cut on the floor.
We recommend you install the new cover using 3M 08611 ribbon sealer to seal between the cover and the floor. We also include the necessary fasteners and rivnut to cleanly install the cover. To install the rivnuts you will need to purchase a rivnut gun. These are available from Harbor Freight (1210) or the one we use, Astro Pneumatic (1442) off of Amazon. You will drill a 23/64″ hole to install the rivnut. We have included one extra rivnut for you to test with. Once you have the rinuts installed, you can simply bolt the cover down with the ribbon seal between the floor and cover.
Level 7 Motorsports LLC • Liability Waiver RELEASE OF LIABILITY
Read this document (the “Release of Liability”) carefully. This release agreement will affect your legal rights and will limit or eliminate your ability to bring a future lawsuit.
I, the Buyer, do hereby agree that Level 7 Motorsports LLC has no control over the installation and use of the parts once sold. I also understand that Level 7 Motorsports LLC highly recommends that certified professionals install all parts that it sells. I, the Buyer, agree that I rely on my own skill and judgment in evaluating the installation of parts bought from Level 7 Motorsports LLC, and I agree that I am solely responsible for the part’s use.
I, the Buyer, agree to hold the Seller (Level 7 Motorsports LLC) harmless from, and hereby assume the entire responsibility and liability for, any and all damage or injury of any kind or nature whatever, including death, as to all persons, whether Buyer’s employees, agents or otherwise, and as to all property, including Buyer’s own property, caused by, resulting from, arising out of, or occurring in connection with the use by Buyer or any other person, of any parts serviced by and or purchased from Level 7 Motorsports LLC.
I, the Buyer, agree that if any person makes a claim for any damage or injury, including death, resulting from the use of the parts or services Buyer purchased from Seller, whether based upon Seller’s alleged active or passive negligence, or based upon principles of product liability, or based upon any alleged breach of any statutory/contractual or common law duty or obligation Seller may have, I shall defend, indemnify and hold harmless Seller, its agents, servants and employees, from and against any and all loss, expense, damage or injury that Seller may sustain as a result of any such claim.
Having read this agreement and knowing these facts and in consideration of Seller accepting my purchase, I, the Buyer, for myself and anyone entitled to act on my behalf, waive and release Level 7 Motorsports LLC, its members, shareholders, officers, directors, agents, volunteers and employees, from all claims or liabilities of any kind arising out of the installation and or use of parts sold and or serviced by Level 7 Motorsports LLC even though that liability may arise out of negligence or carelessness on the part of the Seller.
Jesse Vaughn
Level 7 Motorsports
618-841-1875
Jesse@levelsevenmotorsports.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>