SimPal TY130 WiFi Thermostat Socket User Manual
- June 12, 2024
- SimPal
Table of Contents
****
SimPal TY130 WiFi Thermostat Socket
Package contents
Socket
instruction
Light
indicator
Install APP and add device
Download
Tuya “Smart Life” APP and install on your Android or iOS smart phone. All
operation and settings will be done on APP.
- Plug the TY130 socket onto 110-230V AC power, t he LED will flash slow, then its waiting to set WiFi. If the LED constant light, it means already set WiFi before. It needs to keep press M button for 10 seconds to reset. After reset, the LED will slowly flash.
- Register the APP account and log in, after log in, click”+” icon to add device.
- It will auto display “Discovering devices … “, click “Add” button to add this device, select local WiFi SSID and input Password, then it can add device success.
Manual power on/off
It will display current temperature on the device home page. Turn “Auto work”
function off, then it can manual power on/off. When the power button in grey,
ii means power “OFF”, click the power button, it will turn power on and
display power icon in blue color.
Thermostat control
Turn the “Auto work” function ON, ii will display thermostat control details.
Select the “Heating” or “Cooling” mode, set the target temperature, then ii
will auto turn on/off according temperature value.
Timer control
It can set schedule to make device auto process thermostat control. Timer
Control function only can set when “Auto work” function is turn on. Select the
“ ” icon to set timer control. It allow temporarily manual turn on/off power,
but the timer control will process again when it reach next action time.
Temperature alert
Click the ” ” button to set temperature alert. When temperature lower or
higher the setting range, it will send message to alarm.
Check temperature record
Click “ ” icon to check temperature record. It can check day, week or month
temperature record.
Reset factory settings
Reset factory settings will make the device removed from all registered APP
account, need to set wifi and add device again on APP after reset. Keep press
the M button for 10 seconds, device will reset factory settings.
Technical Specification
- Product size: 1206040 mm (No included plug)
- WiFi protocol: 802.11 b/g/n
- Power input: AC 110-250V
- Temperature sensor range: -20 C -105 C
- Indicator: Power output and wireless signal in Blue
- Max power loading: 16A or 3500W
- Standby power consumption: 25mA