MOTION CM-36 Li-Ion Battery Powered Curtain Motor User Manual

MANUAL CM-36
Li-ion battery-powered curtain motor
with pull and remote operation
User Manual

CM-36 Li-Ion Battery Powered Curtain Motor

Motor features

| | | |
---|---|---|---|---
Integrated lithium-ion battery| Rechargeable with
Micro USB| High torque motorization for
heavy application| Low noise
motorization for
quiet operation| Two-way
communication for
real-time response

Control options

| | |
---|---|---|---
Operate with pull control| Operate with remote controls| Operate with the MOTION app| Compatible with home and building
automation

Support

How to install, program, and operate
rtube.nl/red1495| Download the MOTION app rtube.nl/red981| Download the MOTION app rtube.nl/red982

WARNING
Read the instructions carefully before assembling and using the product. Assembly can be completed by nonprofessionals. For indoor use only.

• Young children can strangle themselves with the loop of pull cords, chains and tapes, and cords that operate window coverings.
• To avoid strangulation and entanglement, keep cords out of reach of young children.
• Cords may ensnare a child’s neck.
• Move beds, cots, and furniture away from window-covering cords.
• Do not tie cords together.
• Make sure cords do not twist together and form a loop.

Cleaning
Follow these general rules when cleaning the outside
of the device and its components:

• Use a damp, soft, lint-free cloth. Avoid getting moisture in openings.
• Do not use aerosol sprays, solvents, alcohol, or abrasives.

Service & Support
Do not perform repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside.
Warranty Service
First, follow the advice in this manual. If the product appears to be damaged or does not function properly, go to your local dealer for instructions on how to obtain warranty service.
Recycle
This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

Important Safety instructions

WARNING: To reduce the risk of severe injury or death, it is important to follow these instructions for personal safety. Save these instructions.

• Read and follow all installation instructions.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children should not play with the appliance. Cleaning and user maintenance should not be performed by children without supervision.
• Do not allow children to play with fixed controls. Keep remote controls away from children.
• Frequently examine the installation for imbalance and signs of wear or damage to cables and springs. Do not use if repair or adjustment is necessary.
• This instruction manual is also available on the website.
• The drive must be disconnected from its power source during cleaning, maintenance, and when replacing parts.
• The A-weighted emission sound pressure level of the drive is equal to or less than 70dB(A).
• Indoor and household use only.
• Disconnect the drive from the power supply or switch off the automatic controls when maintenance, such as window cleaning, is being carried out in the vicinity.
• When operating a biased switch, make sure that other persons are kept away.
• Do not operate when maintenance, such as window cleaning, is being carried out in the vicinity.
• The tube motor must only be supplied with safety extra low voltage corresponding to the marking on the appliance.

Important Installation instructions

WARNING: Important safety instructions. Follow all instructions, since incorrect installation can lead to severe injury.

• This motor can only be used with soft material for driven parts.
• Hazardous unprotected moving parts of the drive must be installed higher than 2.5m above the floor or any other level surface that could provide access to it.
• Install the actuating member of a manual release at a height of less than 1.8m.
• The actuating member of a biased switch is to be located within direct sight of the driven part but away from moving parts. It is to be installed at a minimum height of 1.5m and not accessible to the public.
• The mass and the dimension of the driven part must be compatible with the rated torque and rated operating time.
• Fixed controls have to be clearly visible after installation.
• The driven part must be compatible with the rated torque (CM-36 1.2N.m) and rated operating time (12 min).
• The drive is intended to be installed at a height of at least 2.5m above the floor or any other accessible level surface.
• All-pole disconnection switches must be incorporated into the fixed wiring in accordance with the wiring rules.
• The appliance must only be supplied at safety extra low voltage corresponding to the marking on the appliance.
• Before installing the drive, remove any unnecessary cords or components and disable any equipment not needed for powered operation.

FCC Manual | FCC ID: ZY4CM36
Regulatory Information
1 FCC Information for User
This product does not contain any user-serviceable components and is to be used with approved antennas only. Any product changes or modifications will invalidate all applicable regulatory certifications and approvals.
2 FCC Electronic Emission Notices
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

3 FCC Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area may cause harmful interference, in which case the user will be required to correct the interference at their own expense. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the distance separating the equipment and receiver
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help

EU Declaration
Hereby, Coulisse declares that the radio equipment type CM-36 is in compliance with directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.my.coulisse.com

|
---|---
|
|
|
|
|

1 Install the blind

|
---|---

2 Insert the battery
3 Pair a remote
Pair a remote control that is able to program blinds. See pages 6 and 7 for remote control details. In this manual CM-12 is displayed.
3.1 Shortly press the program button on the motor. The blind will start stepping, indicating that the program mode has been activated. (The blind remains stepping until the program mode is deactivated.)
3.2 Select the desired channel for the blind using the channel selection button on the remote control.
3.3 Press the pair button on the back of the remote control to pair the blind to the selected channel. The blind will shortly stop stepping indicating that the remote has been paired with the blind.
Repeat steps 3.1 – 3.3 to remove a blind from a channel.
End limits must be programmed to use a blind properly and to prevent it from being damaged. Proceed to step 7 if end limits are already set.
4 Check the direction of rotation
WARNING: risk of damage.
Stop the blind before reaching the end positions.
4.1 Shortly press the down button to check if the blind moves the right way: away from the motor. If the blind moves the other way, the rotational direction must be changed.
4.2 Simultaneously press the up and down button to change the direction of rotation.
5 Set closed position 5.1 Before programming the end positions, program mode must be deactivated. Shortly press the program button to deactivate program mode. The blind stops stepping and the end positions can be set.
5.2 Press the down button down to automatically move the blind to the closed position. Once the closed position has been reached, the position is saved.
6 Set open position
7 Set favorite position (optional)

7.1 Move the blind to a desired favorite position.
7.2 Activate program mode by shortly pressing the program button. The curtain will start stepping and the favorite position can be set.
7.3 Hold the center button to save this favorite position. The blind shortly stops stepping indicating the favorite position has been saved.
7.4 Shortly press the program button to deactivate program mode. The blind stops stepping and can be operated.
8 Operate the blind Remote control: Choose the channel to which the blind has been paired using the channel button.
Press the up or down button to operate the blind. Press the center button to stop the blind. Use the left and right buttons to move the blind in small steps.
Pull control: Pull once to move the blind to the end positions.
9 Move to your favorite position Remote control: Press the center button to move the blind to your favorite position.
10 Reset your favorite position
10.1 Move the blind to a desired favorite position.
10.2 Press the program button on the motor to activate program mode. The blind starts stepping.
10.3 Hold the center button to save this favorite position. The blind shortly stops stepping indicating the favorite position has been saved successfully. Press the program button on the motor to de-activate
10.4 program mode. The blind stops stepping.
11 Reset the blind
It is possible to only delete end limits or to do a factory reset.
Factory reset will delete the end limits and remove the connection to any paired remote.
11.1 Press the program button on the motor to activate program mode.
Delete end limits: To delete the end limits of the blind hold the program button until the blind stops stepping for the first time, and keep holding the button until the blind stops stepping for the second time. (approximately 10 seconds)
Factory reset: To reset the blind to factory defaults hold the button for at least 20 seconds. The blind will stop stepping twice. After the second stop, the blind will give one extra step to confirm the factory reset.
12 Recharge the battery
Advanced options
13 Manual control
In case there is no remote control or pull control, the blind can be operated with the program button on the motor.
13.1 Hold the program button to manually operate the blind. The blind will move as long as the button is pressed. (max. 15 sec.)
13.2 To move the blind in opposite direction, release the program button and repeat step 13.1.
14 Single select 5-channel remote
Single select makes it possible to activate program mode on a single-blind through remote control, without having to physically press the program button on the blind.
14.1 To activate Single select simultaneously hold the center button and press the pair button.
14.2 The remote start searching for blinds (search mode). This is indicated by the LED’s flashing from left to right.
14.3 Once a blind is found the channel LED will flash and the blind starts stepping, indicating that program mode has been activated. The blind can now be (un)paired to the remote and/or programmed.
14.4 To search for the next blind press the right button. Search mode will be activated. To find the previous blind press the left button.
14.5 To exit Single select press the right button during search mode.
15 Single-select 15-channel remote
Single select makes it possible to activate program mode on a single-blind through remote control, without having to physically press the program button on the blind.
15.1 To activate Single select simultaneously hold the center button and press the pair button.
15.2 The remote start searching for blinds (search mode). This is indicated by the horizontal bars on the remote.
15.3 Once a blind is found the channel number will flash and the blind starts stepping, indicating that program mode has been activated. The blind can now be (un) paired to the remote and/or programmed.
15.4 To search for the next blind press the right button. Search mode will be activated. To find the previous blind press the left button.
15.5 To exit Single select press the right button during search mode. The display shows the letter O.
16 Channel select 5 channel remote
Channel selection makes it possible to copy blinds in between channels/remotes without having to physically press the program button on the motors.
16.1 Select the channel from which the blinds must be copied.
16.2 To activate channel selection simultaneously hold the channel selection button and press the pair button.
16.3 All blinds in the selected channel will start stepping, indicating program mode has been activated. All blinds can be copied to a new channel on the same remote or another remote. Select a new channel on the (new) remote.
16.4 Press the pair button on the (new) remote to pair the blinds to the new channel.
16.5 To exit channel select go back to the channel selected at step 16.1 and repeat step 16.2
17 Channel select 15 channel remote
Channel selection makes it possible to copy blinds in between channels/remotes without having to physically press the program button on the motors.
17.1 Select the channel you would like to copy.
17.2 To activate channel selection simultaneously hold the channel selection button and press the pair button.
17.3 All blinds in the selected channel will start stepping, indicating program mode has been activated. All blinds can be copied to a new channel on the same remote or to other
remotes. Select a channel on a (new) remote.
17.4 Press the program button on the (new) remote to pair the blinds to the (new) remote.
17.5 To exit the channel select choose the channel you selected at step 17.1 and repeat step 17.2

Frequently Asked Questions

12. The remote battery is empty. (LEDs of the remote are flashing rapidly.)| Replace the battery in the remote. See the manual for the remote.
    The remote battery is inserted incorrectly.| Replace the battery in the remote. See the manual for the remote.
    Radio-frequency interference| Make sure that the antenna of the motor is out of the way of metal objects.
    The distance from the remote to the motor is too far.| Move closer to the motor.
    The remote is not connected to the blind.| Pair the remote with the motor. See step 6.
    Motor LED flashes red| The battery of the motor is empty.| Charge the motor. See step 12.
    Multiple blinds respond to
    a remote. (Unable to program a single blind)| Multiple blinds are paired to a single channel.| Pair the blind to a free channel to program or use single select to program the blind.
    Blind moves in small steps.| No end limits are programmed.| Program end limits. See steps 5 – 6.
    The favorite position can not be programmed.| No end limits are programmed.| Program end limits. See steps 5 – 6.
    Blind moves in the opposite direction.| The direction of rotation has been set incorrectly.| Change the direction of rotation. See step 4.
    The blind keep moving left and right.| The blind is in program mode.| Press the program button on the motor to exit program mode.

For the latest information and updated manuals visitrtube.nl/cm-36
Disclaimer:
© Copyright Coulisse
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, by any means, electronic, mechanical, photocopying, recording, digital, or otherwise without the written permission of the publisher. Although this manual has been composed with the most care, Coulisse B.V. does not accept any responsibility for damage due to mistakes and/or faults in this manual.
Coulisse B.V. reserves the right to revise the manual and to revise and/or change its content at any time, without obligation to notify any person or entity of such revisions or changes. The most recent version replaces older versions of this manual. The most recent version is available at my.coulisse.com or contacts your Coulisse contact person. We invite you to send remarks and comments about this manual to Coulisse at manuals@coulisse.com.

References

• Log in to Coulisse
• ‎Motionblinds Bridge in de App Store
• Motionblinds Bridge - Apps on Google Play

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>