Kensington SD4800P Docking Stations Compliance Instructions
- June 5, 2024
- Kensington
Table of Contents
- Kensington SD4800P Docking Stations Compliance
- FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT
- Radiation Exposure Statement
- FCC DECLARATION OF CONFORMITY
- IC STATEMENT
- Radiation Exposure Statement
- CE DECLARATION OF CONFORMITY
- INFORMATION FOR EU MEMBER-STATES ONLY
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Kensington SD4800P Docking Stations Compliance
FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio /TV technician for help
Modifications: Modifications not expressly approved by Kensington may void the user’s authority to operate the device under FCC regulations and must not be made. Shielded Cables: In order to meet FCC requirements, all connections to equipment using a Kensington input device should be made using only the shielded cables.
Radiation Exposure Statement
The product complies with the FCC RF Exposure for Low Power Consumer Wireless Power Transfer. RF exposure limits set forth for an uncontrolled environment and are set for the intended operation as described in this manual need greater separation from a re-user DOuy or set the device to lower output power such function is available
FCC DECLARATION OF CONFORMITY
This product complies with Part 15 of the FLC rules. operation is subject to
the following two conditions:
including interference that may cause undesired operation. As the section 2
the ues the (1) This device may not cause harmful interference, and (2) This
device must accept any interference received,
94404, USA, 800-535-4242 device Is
Kensington Computer Products Group, 1500 Fashion Island Eve, 3rd Foor, San
Mateo,
IC STATEMENT
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions: (1) This device
may not cause interference. (2) This device must accept any interference,
including interference that may cause undesired operation or the device.
This class [B] digital apparatus complies with Canadian ICES-003, CAN
ICES-3(B)/NMB-3(B).
Radiation Exposure Statement
The product complies with the Ic RF Exposure for Low Power Consumer Wireless
Power Transfer. RF exposure limit set forth for an uncontrolled environment
and are safe tor intended operation as described in this manual The further RF
exposure that compliance was demonstrated at 1Ocm and greater separation from
the user body or set the device to lower output power if such function is
available.
RSS-102, at 10 cm from the wPT system in all directions,
CE DECLARATION OF CONFORMITY
Kensington declares that this wireless product model is in compliance with the
essential requirements and other
relevant provisions ot RED2014/53/EUand other applicable Et directives.
Documentation link at
www.support.kensington.com may de be
obtained by clicking on the Compliance The dock meets EU ErP (EC) 1275/2008
and (EU) 801/2013 Regulation. The power consumption is less than 0.5W in off
mode.
INFORMATION FOR EU MEMBER-STATES ONLY
The use of the symbol indicates that this product may not de treated as household waste. by ensuring this product IS disposed or correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service, or the shop where you purchased the product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>