Shenzhen Lingan Wireless Technology D01 Short Video Controller and Self-Timer User Manual
- June 5, 2024
- Shenzhen Lingan Wireless Technology
Table of Contents
Shenzhen Lingan Wireless Technology D01 Short Video Controller and Self-
Timer
Packing List
Use Diagrams
Power On
in the power-on state press and hold the middle key for one second the blue light will come on.
Power On
In the Power on state, press and hold the key for about 5 seconds, the red light will be on.
Pairing
When in the Power off, press and hold the middle key for a long time for one second the red and blue lights flash alternately (or when the phone is disconnected)
Connect a Mobile Phone
In the power-off state, press and hold the middle key of the controller for one second, the red and blue lights flash alternately. The controller is in the pairing state. At this time, turn on the Bluetooth of the mobile phone and search for the device. The Bluetooth menu shows: D01 and click, and complete the Bluetooth connection according to the prompt. If you can’t find it please try turning off Bluetooth and tuming it on again until the connection is completed
Key Function
Double-click: Video swipe right Long press for one second and let go:Lock screen Double -click:Video swipe left
Take Pictures And Records videos
- In photo or video recording mode, press dny one of these two keys for 2 seconds take a photo or start recording video and end recording video
- Short press the middle buttom to focus Be careful: 1.Support the original camera and various beauty cameras to take photos and record videos
- For TikTok short videos, long press the button to adjust the volume of background music, so photographing and video recording are not supported
Charging Diagram
Automatic shutdown function
- For normal pairing or pairing enabled by disconnecting from the mobile phone, it the mobile phone is not connected within 5 minutes, it will automatically shut down
- If there is no operation after pressing the button for 30 minutes, it will shut down automatically
About iPhone
Special reminder about the use of iPhone:
- Turn on iPhone Setting-Accessibility-Touch- AccessibilityTouch Setting to Open See the picture below:
Until the following illustration appears
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: this device may not cause harmful interference,
and this device must accept any interference received, including interference
that may cause undesired operation. Changes or modifications to this unit not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements in
portable exposure conditions without restriction.