ZOOKKI ZK-G-09 GoPro Action Camera User Manual
- June 5, 2024
- ZOOKKI
Table of Contents
- ZOOKKI ZK-G-09 GoPro Accessories User Manual
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ZOOKKI ZK-G-09 GoPro Accessories User Manual
CAUTIONS
- Keep away from reach of children.
- Use by children must be under safe guide of adult.
- To make sure that you can use successfully, all screw bolts and adapters have to be screwed tightly in the process of assembling.
- There is no single standard about the collocation. Instructions only acts as a reference. More uses depend on your needs.
- This specification does not cover all about the Gopro accessories, if you want to know more, please consult: http://www.smzdm.com/mall/gopro_cn/haitao
Adapter & Surface Quick Release Buckle & Surface J-Hook Buckle
The bottom of the adapter is international 1/4 camera mouth standard
connector, the upper is the Gopro camera standard bayonet
Surface quick release buckle is the most convenient Gopro bayonet converter.
J-Hook buckle promises a greater retention of the distance between the base of
the camera buckle and camera, which makes the installation more convenient
Assembling Steps
As the picture shows:
Fix the surface quick release buckle base on any other mounts, then fix the
camera on the buckle with a screw bolt
The adapter can be used with the self-pole, tripod, waterproof shell interface
Fix the J-Hook buckle on any other mounts, then fix the camera on the buckle
with a screw bolt
Car Suction Cup Mount
The sucker at the bottom with full blockade of gas tightness plate
The intermediate portion of the sucker can rotate 180 °from the left to the
right, and the neck can rotate 180 ° from the front to the back
Assembling Steps
As the picture shows:
The car suction cup mount can be used with the quick release buckle or J-Hook
mount
Fix the camera on the quick release buckle or J-Hook mount
Press the plate buckle, the car cup mount can be attached to the car glass and
be sucked tightly.
Extendable Handle Monopod
It uses six extended arms. The head of the monopod can rotate 180 ° freely
The length is 24.5cm in a collapsed state, and 106.5cm in an elongated state
You can adjust the shooting length according to your own needs
Assembling Steps
As the picture shows:
It can be used with the adapter as the picture shows
Then fix the camera on the adapter
Head Belt Strap Mount
It is an adjustable, anti-slip headband, and will not fall off in the movement
Assembling Steps
As the picture shows:
It can be used with the extendable helmet arm to extend the shooting distance
It can be used with the three-way adjustable pivot arm to get more shooting
perspectives
Removable Adjustable Pivot Arm
To assemble the removable adjustable pivot arm, you need 2 adapters, 3 long
screw bolts and 1 short screw bolt.
It permits three- way to change and will be useful in all sports
Assembling Steps
Bike clip to reasonably use on three transfer, changed the perspective on the
bike stand still
The handlebar clamp and three connector combination, can meet your more
demanding of filming, promote shooting multiple points of view on motor
vehicles.
The number of connector used with helmet with collocation, is greatly
increased by the head fixed Angle changes.
A number of combinations of connector and small suction cups, without the
whole barrier-free Angle shot.
Three connector with the strong combination, formed four adjustable direction,
at any Angle without any pressure.
Three connector and head with collocation, increased the diversity of the head
movement Angle
A number of connector and dog are tie-in, increase the Angle to the dog to see
the world in all aspects.
A number of connector combined with chest strap, changed the chest Angle
observation horizon
Chest Belt Strap Mount
It is adjustable and suitable for adults.
Put on the chest belt strap mount in the chest. Shooting at the chest angle
give you an immersive feeling in the movement
Assembling Steps
As the picture shows:
The chest belt strap mount can be used with the quick release buckle or the
J-Hook mount, such combination can fix the camera quickly and tightly
Floating Handle Grip
Floating handle grip can be used in water sports (surfing, swimming, etc.)
Float design and comfort grip are its major features
The bright yellow is very easy to find in the water. And the adjustable wrist
band can also prevent the camera lost. It is dual anti-lost protection
Assembling Steps
As the picture shows:
Because floating handle grip itself has a quick bayonet of the Gopro camera,
it can be used independently without any other accessories except a screw
bolt and a wrist band
Address: Minkang Road No.284, Minzhi Street, Longhua New District
Shenzhen
Guangdong
China
Tel: 18312506810
E-mail: zookkibrandus4@sina.com
86556.666