JBC PH218 Thermocouple Type K Temperature Reader Instruction Manual
- June 5, 2024
- JBC
Table of Contents
INSTRUCTION MANUAL
PH218
Thermocouple Type K
This manual corresponds to the following references: PH218
The following items are included:
Packing List
PH218 Thermocouple
Type K ………………………….. 1 unit
Manual …………………………. 1 unit
Ref. 0028991
Features and Connections
The Thermocouple Type K reads the temperature on a specific point of the PCB.
PH218 helps to manage the temperature profiles when used with JBC’s preheaters
and hot airs stations. It also works with TID, JBC’s digital thermometer.
Recommendations
The use of kapton tape is recomended to fix the end of the thermocouple wire
onto the PCB.
Place the control thermocouple as near as possible to the component being
soldered/reworked (1).
If there are any sensitive components, use a second thermocouple (2) as
protection.
IPC does not recommend exceeding ramp-up rates over 3 – 4 °C / sec (5 – 7 °F / sec) so as to reduce the risk of thermal stress on the PCB.
Specifications
PH218
Thermocouple Type K
Ref.: PH218
- Temperature Rating: 70 to 250 ºC / -94 to 482 ºF
- Wire Isolation: PFA
- Wire Diameter: 2x Ø 0,2 mm / 2x Ø 0.008 in
- Wire Length: 1 m / 39.37 in
- Total Net Weight: 11.8 g / 0.026 lb
- Package Dimensions/Weight: 110 x 80 x 40 mm / 32.7 g
(L x W x H) 4.33 x 3.15 x 1.57 in / 0.072 lb
Complies with CE standards. ESD safe.
Warranty
JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear or misuse. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.
This product should not be thrown in the garbage. In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility.
www.jbctools.com
0029001-130522
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>