SNIPES 46365-2 Interactive Shooting Targets User Manual
- June 5, 2024
- SNIPES
Table of Contents
SNIPES 46365-2 Interactive Shooting Targets
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Product Information:
SNIPES is a set of interactive targets to connect your hockey net. Train your
shooting accuracy, power and reaction time and track your progression! Snipes
can be used standalone with our 4 preloaded game modes, or in tandem with our
mobile app to unlock all functionalities. Within the app are multiple game
modes, scorekeeping functions and in future updates will include online
capabilities to play against your friends and opponents from around the world.
Setup:
- Side A (carabiner), Side B (carabiner/spring)
- Connect side A by wrapping the carabiner around the post and clipping back on the lace
- Slide targets to desired position
- Connect side B around the post onto the hockey net, ensure the spring is slightly extended so there is tension on the lace
Removing SNIPES remove side B, then side A
Connecting/Removing electronics case
- Slide case into the back of the target
- Turn the dial by hand or with allan key to secure it into place
- To charge, simply unscrew the dialby and or with allan key and slide the case out
Charging:
- Remove the electronics case from the target and charge separately or together
- The red light indicates charging
Usage:
Without App:
-
Turn on all SNIPES targets you wish to use, they will all flash green
-
Hit one of the Snipes targets so it flashes blue, other targets will
connect automatically and bring you to main menu -
Select from one of the four preloaded game modes on SNIPES targets:
-
Single light (solid): single player, classic mode
-
Single light (flashing): single player, react mode
-
Two lights (solid): 2 player, classic mode
-
2 lights (flashing): 2 player, react mode
-
After the two player game finishes, you will automatically return to the main menu
-
To return to the main menu of single player mode, hit a target that’s not lit up 3 times consecutively
With APP:
- Turn on all SNIPES targets you wish to use, they will all flash green
- Within Bolt APP, connect to targets from main menu or settings page
- Navigate desired game modes from APP
Game Modes
Preloaded On Targets:
- Single Player, Classic: no time limit, aim for the target that’s lit up
- Single Player, React: no time limit, hit the target as quick as you can once it lights up
- Two Player, Classic: head to head classic mode, 30 seconds, whichever color hits more points wins
- Two Player React: head to head react mode, first to 5 points wins
Within APP:
Classic: 45 seconds, hit as many targets as you can
Pro: Same with classic with a twist! Every few seconds the targets will
change.
React: All lights are off. When one lights up, hit it as quick as you can!
Score 10 times to win. Your score is a total of time it took to hit all the
targets.
Arcade: Green = 1, Red = 2, Blue = 3. 45 seconds. Be careful, you’ll have
to choose which target to hit and some targets are on longer than others!
2-Player: 30 seconds, player 1 is green, player 2 is blue, highest score wins!
Trainer Mode: This mode is designed for coaches or friends to use. Gives them the capability to
Adjusting Target Sensitivity
In the ‘Settings’ menu of the mobile app, you can change the sensitivity of the targets to make them more or less sensitive. Targets come preloaded to sensitivity 5 (default). Slide up towards 10 make them less sensitive (harder to set off the sensor) and down towards 1 to make them more sensitive (easier to set off the sensor). All connected targets will be adjusted when you change the slider.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.