IPMedia Holdings Pulse Bluetooth BT Earbuds Instructions
- June 5, 2024
- IPMedia Holdings
Table of Contents
IPMedia Holdings Pulse Bluetooth BT Earbuds Instructions
Product Specs:
- Bluetooth Version: 5.0
- Bluetooth Range (Effective Distance): 10 meters
- Frequency Response: 20Hz-20kHz
- Input: 5V/50mA
- Battery:70mAh
- Play Time: 3-4 hours
- Charging Time: 1 hour
Pairing Name: Pulse BT 5.0 Earbuds
- Hold Power Button for 3 seconds to Power On/Off.
- Single press Power Button to Play, Pause, Answer and End calls.
- Press (+) Button to Skip Backwards.
- Hold (+) Button to Increase Volume.
- Press (-) Button to Skip Forwards.
- Hold (-) Button to Decrease Volume.
- When ON, the LED light will Blink Blue, until Paired with Device.
- When Charging, the LED light will Glow Red.
- When Fully Charged, the LED light will Glow Blue.
- Micro USB charging port. Plug-in using power cable to charge earbuds.
Safety & Compliance:
-
This product is NOT waterproof or water resistant. Exposing the earbuds to rain, moisture or other liquids may damage the product and may result in injury to the user. Do not touch or use with wet hands.
-
The product packaging contains small items that may be hazardous to children and may pose a choking or strangulation hazard. Keep the product, accessories and packaging out of reach of children at all times.
-
This product is not a toy.
-
Do not attempt to disassemble or insert items into the earbuds as this may cause short circuits resulting in electrical shock or fire.
-
The product contains no user replaceable parts. Only authorized service engineers may open up the product.
-
If the product is damaged in any way, pierced, dropped, exposed to liquid, or if the product overheats or if the charging cable is damaged, you should discontinue use.
CAUTION: The battery in this product may present risk of fire, explosion, electrical shock or chemical burn if misused. -
The battery in this product is not user replaceable and should only be handled by authorized service engineers.
-
Under certain conditions, exposing the device to a strong electrostatic discharge may cause the device to stop operating. Resulting in the need to reset.
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF exposure statement:
The transmitter must not be colocated or operated in conjunction with any
other antenna or transmitter. This equipment complies with the FCC RF
radiation exposure limits for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of 5mm between the
radiator and any part of your body
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>