iPriro WA-C02-02 Smart Sprinkler User Guide

iPriro WA-C02-02 Smart Sprinkler

Dear friend

Thanks for choosing our smart sprinkler product! Your satisfaction as a plant customer means everything to us. Before using this unit, please read these operating instructions carefully, and take special care to follow the warning and safety suggestions. If you have any question or problem during using our product, please contact our customer service and your problem will be solved within 24hrs.

Contact on purchase page: Click on” Ask a question”

Email: ipriro@outlook.com
Website: www.ipriro.com

Thank you!

Enjoy building your custom loop using the Smart Sprinkler prior.

What’s in the Box

Design Your Watering Loop

The fun starts at designing your custom watering loop, your custom watering loop contains

• Water source is generally a container (not supplied) of water
• A scissor to cut the pipes
• A cup of hot water (Soften the pipes to set the T-connector and drippers easier)
• The smart sprinkler unit set

We recommend you to drawa design map of your loop, which indicates where the T-connectors will be used. Such a design will help you to determine how to cut the soft pipe and prevent wastes.

The following considerations are advised for your design

1. This smart sprinkler is designed to water up to 15 plants, because of high power pump you’d better to set up more than 4 drippers.
2. For even water flow, the plants should not 2 meters over than the water source (in the container)
3. The inlet pipe should not be more than 3 meters, the outlet pipe should not be more than 10 meters.
4. The important is the smart sprinkler unit should be placed above the water source for preventing Siphon.

Assemble Your Watering Loop

Smart Sprinkler Operation

• Manual Mode: (This means watering anytime, it won’t disturb the timer you already set.)
• Press the middle button to star or stop the pump from working.
• If your “Watering Time” is set up, then the device will stop when finish the “Watering Time”.

Light Meaning

1. Watering-Fast blinking green light
2. Sleep mode-slow (every 5s) blinking green light
3. Low battery-Red blinking light

Watering Time: (Means the watering duration)

• Press the left button to control the “Watering Time”, the time unit is second(5~55s)or minute(1~30min, when the middle dot is lighting means minute unit.) You can change second/minute by pressing or hold the button.
• A single press of the button will increment 5s or 1m accordingly.

Attention

1. When the middle dot is lighting, “0.1” means 1 minute, “1.1” means 11 minutes, “2.0” means 20 minutes, the dot is only for unit meaning.
2. In order to ensure that the water flow is your need, you should press the manual mode to test the “watering time”. The count of drippers and the height of your plants make different flows you get.

Watering Intervals: (Means the time between the last watering time and the next.)

Press the right button to control the “Watering Intervals”, the time unit is day (1~30 days) or hour (1~23 hours, when the middle dot is lighting means hour unit.) You can change day/hour by press or holding the button.

Attention: When the middle dot is lighting, “0.1” means 1 hour, “1.1” means 11 hours, “2.0” means 20 hours, the dot is only for unit meaning.

After finish setting, press the middle button to confirm, it will enter to the first automatic watering mode and the indicator will flash green light quickly.

Example: If your plants need: Watering every day at 9 am, 2 mins each time, You can set the device time at 9 am. Then set the “Watering Time” to “0.2” min, and “Interval Time” to “01” day. Press the middle button, it will enter the first automatic watering mode after setting. By 9 am the next day, the device will work again, and so on.

Product Specification

Q&A Trouble Shooting Guide

This part will be updated on the listing, please refer to the page.

Maintenance and Services

• Email: ipriro@outlook.com
• Manufacturer: Guangdong plant Technology Co,.Ltd.
• Address: Room 106 or 107, Jinhaozhiying Incubation Park, No. 1 Fengxian Road, Huangpu District, Guangzhou, China.

iPřiro Certificate

• Name: …………………………..
• Model: …………………………….
• Standard: ………………………..
• production: ……………………
• Date: …………………..

Guangdong Weiai Technology Co., Ltd.

Made in China

References

• iPřiro

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>