Grandex PS860-01 True Wireless Smart Meat Thermometer Instruction Manual
- June 5, 2024
- Grandex
Table of Contents
Grandex PS860-01 True Wireless Smart Meat Thermometer
FIRST TIME SETUP
- Open your preferred mobile app store. Search and download “The MeatStick App”. You can also find these instructions on the App.
- Place stick on the charger, insert 2 new AA batteries, click the button to activate your charger. Please charge the stick for a minimum of 4 hours before your first use.
- Press the button on the charger to activate the stick. Select the stick in the App and choose your desired cook.
- You can NOW remove the stick from the charger and insert it completely into the meat, up to the ceramic handle. The stick should be in the thickest part, away from fat and bones.
- YOu WIll get rea-time data on your smartphone, the App will let you know when it’s ready to eat.
- After enjoying your meat, allow the stick to cool down, then clean it to look like new and replace on charger. It will auto turn off when not in use.
- The stick will auto-charge whileon the charger so it’s ready to use for your next co
CAUTION
- The stainless steel stick withstands up to 212°F/100°C and the ceramic handle withstands up to 572°F/300°C.
- Exceeding the recommended temperatures may damage the stick.
- If not within a heat source, the stick will turn off automatically after 30 minutes.
- Position the stick completely into the meat. This allows the stick to withstand the high temperatures.
- Cooks over direct heat may cause fire flare-ups that can instantly exceed 900°F/500°C. Please be aware and remove the stick to avoid damaging it.
- In an open grill you can be up to 33ft/10m away from your stick. The range will be reduced to 6ft/2m orless in enclosed cooking setups (i.e. oven).
STICK & CHARGER
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCCRules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.the equipment generates uses andcan radiate radio frequency energy and, if not installed and used in accordance with these Thisinstructions, may cause harmful interference communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by oneto radio of the followingor more measures:-Reorient or relocate the receiving antennaHncrease the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.Consult the experienced radio/TV technician for helpThis the device complies with part 15 of the FCC Rules. Operation is subject to the following twoconditions: () This device may not cause harmful interference, and (2) this device interference received, includinginterference that may cause undesired operation. Changes or modifications not expressly approved by the partyresponsible for compliance could void the users authority to operate the equipment dealer oran must accept any.