perixx PERIMICE-608 Programmable Ergonomic Mouse User Manual

June 5, 2024
Perixx

perixx PERIMICE-608 Programmable Ergonomic Mouse User Manual
perixx PERIMICE-608 Programmable Ergonomic Mouse

Product Illustration

Low Battery Status: LED keeps flashing
DPI 800: Flashing once
DPI 1200 (Default): Flashing twice
DPI 1600: Flashing thrice

How do you connect PERIMICE-608?

How do you connect PERIMICE-608?

Important Safety Instructions:

  • Avoid dropping.
  • Do not disassemble.
  • This product is suitable for moderate climates only.
  • The maximum ambient temperature during use of this product must not exceed 40 degree
  • Open flame sources, such as candles, must not be placed on this product.
  • Only use a dry cloth or brush to clean this product.

Perixx offers a one-year limited warranty with an optional one-year extension.

Specifications

Interface 7.4GHz
Size 124•68•62mm
Weight 10215g
Input Current 3V/6mA
Battery Required MA batteries 2pcs
Material ABS
Operating System Requirements Win 7 or later
Number of Buttons 7
DPI 800/1200/1600
Acceleration 10G
Tracking Speed 30IPS
Report Rate 125H2
Durability 5 million keypresses

PERI MICE-608 Programmable Driver Settings

Please download and install PERIMICE-608 programmable driver from our website. (https://eu.perixx.comioages/download-driver) After the Installation, you can start the setting by clicking the Icon.

Main Control

There are 5 buttons which can be set up.
In section A STANDARD BUTTON ASSIGNMENT , you can assign standard functions to 5 buttons with the drop-down list options.
In section B GAME PROFILES , you can create, save and load your own settings for up to 5 profiles. You can also edit the existing profiles by clicking EDIT PROFILE.
In section C DOUBLE CLICK , speed can be adjusted based on your needs.

After the settings, please press APPLY to save the settings. Then you can press OK to dose the window or CANCEL to discard the settings.
For more information, please visit our website. https://eu.perixx.com/pages /user-manual

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class 8 digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

  • The manufacturer and re-resellers are not responsible for any technical malfunctions, damage, or personal injury incurred by:
    Any attempt to dismantle, change or modify the product in any manner
    Malfunction or damage is due to misuse or improper alteration or repair.
    Malfunction or damage caused by external influence such as falling
    Malfunction or damage is caused by fire, salt, gas, earthquake, lightning, wind, water, or other natural calamities, or abnormal voltage.
    Malfunction or damage is caused by other devices connected to the products. Malfunction or damage is caused by high temperature, humid, greasy, dusty, and hazardous environment.

  • You are cautioned that changes or modifications not expressly approved by Perixx Computer GmbH could void your authority to operate the equipment.

  • All brand names, trademarks, and logos are the properties of their respective owners.

Please Note: Long-term repetitive use of any keyboard and mouse could cause injury to the user. Perixx recommends users avoid excessive use of this or any keyboard and mouse.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Perixx User Manuals

Related Manuals