IWO DTNOI7 Sports Smart Watch User Manual
- June 5, 2024
- iwo
Table of Contents
DTNOI7 Sports Smart Watch
User Manual
Thank you for choosing our smartwatch. You can fully understand the use and
operation of the equipment by reading this manual. The company reserves the
right to modify the contents of this manual without any prior notice.
The package box contains a packing box, a manual, a host, and a data cable.
Watch function description
Button description:
- Short press on the dial interface to enter the menu style interface, and short press on the menu style interface to exit;
- In the menu style interface, short press twice continuously to switch the menu style;
- When entering the second-level interface or the third-level interface, the short-press function is the first-level and first-level exit function;
- Long press the switch, choose X to not shut down, and choose √ to shut down.
- In the dial interface or menu interface, rotate the button to switch between different dials and menu pages.
Charging instructions
Wireless charging, as shown in the picture below.
Shortcut function:
- Swipe to the left to find the “+” icon, and click the icon to add part of the menu as a shortcut function.
- Slide down to find Bluetooth connection status, time, power, do not disturb mode, brightness adjustment, and other functions.
- Swipe to the right to display, time/date/week, the latest message (enter to view multiple messages)/turn on or off Bluetooth for calls and display some of the recently used menu functions.
- Swipe up to enter the menu interface, and slide up and down to find the corresponding function.
- Long press the watch face interface to slide to switch the watch face, select it and touch it to set it successfully.
Push message
- When the watch is bound to the APP, and the notification permission is turned on, the new messages received in the notification bar of the mobile phone will be pushed to the watch, and a total of 10 messages can be saved. The messages received after 10 messages will be overwritten one by one news.
- Swipe to the bottom to press the delete icon to clear all message records.
Drop-down menu
The dial interface slides down to open the drop-down menu interface.
- Bluetooth connection status; time display, power display;
- The first icon is about;
- The second icon, do not disturb mode, turns on do not disturb only for message-type information, not for phone-type audio;
- The third icon can adjust brightness adjustment;
- The fourth icon can control mobile phone music (connect to APP).
- New shortcuts added to drop down
Add a second page by pulling down half of the screen (after pulling down, slide left or right), you will find more shortcut features:
GPS/mode selection/power saving mode/alarm clock/flashlight/voice assistant In power saving mode, the brightness display will be slightly different.
message
The watch and the APP are successfully bound, the corresponding notification
authority in the mobile phone system is opened, and the mobile phone
information can be synchronized with the watch.
Incoming call notification:
Turn on the call reminder in the personal application. When the phone receives
the call reminder, the watch will light up or vibrate.
SMS notification:
The SMS notification is enabled in the personal application. When one or more
SMS messages are received on the mobile phone, the watch will receive one or
more SMS reminders at the same time.
Other application message notifications:
Turn on the corresponding application message notification switch in personal
applications, such as WeChat, QQ, Outlook, Facebook and other applications.
When the mobile terminal receives one/multiple application message
notifications, the watch terminal will receive one/multiple corresponding
message reminders at the same time Notice.
Frequently used contacts
You can connect to the APP. In the device of the APP” select frequently used
contacts” add contacts (up to 20 contacts can be added), which can be
synchronized to the watch, and the watch can display up to 20 contacts.
Fitness data
The fitness data is turned on by default. Enter the fitness data interface and
slide from bottom to top to display the current number of steps, distance, and
calories of the watch. The data is cleared at 12 o’clock in the morning every
day.
Smart mode selection
When the watch is switched to watch mode, the watch will disconnect the
Bluetooth connection and the watch can be used independently, making it more
power-efficient.
When the watch is switched back to smart mode, the watch can connect to the
APP on the phone to perform more smart operations.
Sports modes (strike, running, cycling, skipping rope, badminton, basketball, football, etc.)
- Select the corresponding exercise mode, click the start button on the screen to enter the corresponding exercise mode; click the start button of the exercise being calculated to pause the exercise, click the end button to end the exercise, and save the data.
- When the exercise time is longer than 1 minute, the exercise data can be saved; when the exercise is saved under this condition, it will prompt “Too little data to save”.
- Newly added more exercise modes to choose from, such as gym, yoga, indoor running, and free training.
- Newly added GPS tracks. When the APP enters the motion function, the watch will enter the GPS motion at the same time; After the exercise, the GPS motion track (such as data) of the mobile APP will be synchronized to the watch for users to check.
Heart rate
Put the watch on your wrist correctly, enter the heart rate menu, and you
can measure the heart rate value at a time.
ECG
Put the watch on your wrist correctly, enter the ECG menu (need to open the
APP “ECG monitor” interface), you can measure the ECG value in a single time,
and the single ECG measurement can be saved in the APP simultaneously. This
function needs to be connected to the APP to use.
My QR code
Connect the watch to the APP, find my QR code on the APP interface, and select
WeChat/QQ/ Alipay and other “Receive money QR codes” to save (the specific
operation method is based on the instructions of the APP).
-
Calculator
Simple calculations can be performed after entering. -
Remote music
Connecting to the APP, you can control the phone’s music/start/pause/previous/next song, and the speaker sound will appear on the phone.
Connect the call Bluetooth, you can control the phone’s music/start/pause/previous/next song, and the speaker sound appears on the watch. -
Sleep
Sleep monitoring time period: from 18:00 in the evening to 10:00 the next day, the watch generates data. After exiting the sleep monitoring, the sleep data on the watch can be synchronized to the APP for viewing after connecting to the app. -
Stopwatch
Click the stopwatch to enter the timing interface, and you can record the time at a time. -
Weather
After the watch is connected to the app and the data is synchronized, click on the weather on the watch to display the weather information of the day. -
Find mobile phone
After the watch is bound to the app, click on the phone to find the phone on the watch, and the phone will vibrate or ring tones. -
Meteorology
Click the weather on the watch side to display the ultraviolet (UV) and air pressure conditions of the day. -
Breathing
There are three modes of breathing: slow, moderate, and fast, which can be selected, and the breathing can be carried out according to the mode selected by the user. -
Massager
Tap the green button to start the massage, and the watch is in a vibrating state, tap the red button to end the massage state. -
Time setting
Disconnected from the mobile APP and set the timer function on the watch separately. -
Voice assistant
After connecting audio Bluetooth, you can wake up the phone’s voice assistant feature (for, For example, an IOS phone is Siri, and the Android phone is the voice assistant) -
Flashlight
Tap the flashlight icon, the watch screen will be fully lit to achieve the torch function.
Female assistants
Record the status of women’s menstrual period, you can view the data of the
most recent month-end time, the length of the menstrual period, and the number
of days between menstrual periods on the app.
-
Menu style
There are a variety of menu styles to choose from. After setting, the menu style of the watch will also be changed. -
Settings
- When you enter, you can select the watch language, connect to the APP, and
synchronize data.
The watch and the phone have the same language. - Switch the watch face, slide right to select the next watch face, select a watch face, and click to set the watch face.
- Bright screen time; a variety of bright screen time lengths can be selected.
- Vibration intensity; click to set reminder vibration intensity.
- Bluetooth phone; Bluetooth phone can be turned on/off
- Password; a 4-digit password can be set (if you forget the password, please enter 8762, which can be decrypted)
- Restore factory settings; click √ to enable the factory reset, and click X to cancel the factory reset.
APP Binding
APP download
-
Scan the QR code to download the APP
http://dt1pro.cn/app-download/wearpro/index.html -
For Android end users:
Search for “WearPro” in the Google Play App Store or any customized Android Store to download, remember to check the phone pop-up box to agree to the permissions when installing; -
For IOS end users:
Search for “WearPro” in the APP Store to download, remember to check the mobile phone pop-up box to agree to the permissions when installing;
After WearPro is installed, the application icon is shown as :
Connect APP through mobile phone Bluetooth
-
Search for Bluetooth name to connect/pair
Scroll down on the watch’s main interface, find the first icon “About (i)” and click it, and remember the Bluetooth name of the watch; then, open the WearPro APP on the mobile phone, click on the “Device” column, and click on “Search to bind device” to start searching, In the Bluetooth list, find the Bluetooth name of your watch and pair it. If the connection is successful, the Bluetooth icon of the watch will light up green (in the middle of the icon); -
Scan QR code to connect/pair
After pulling down on the watch’s main interface, click on the first icon displayed “About (i)”, you can see a QR code for connection, then take out the phone to open WearPro, and in the “Device” column, select “Scan to bind device”, the pairing box will pop up after scanning the QR code. Click “Pair” to connect the App to the watch. Remember to check to agree to the notification permissions of various Apps;
Connect the watch’s audio/call Bluetooth channel:
Open the Bluetooth settings of the phone, swipe right on the main interface of
the watch, click the “phone call” icon that appears below, and click “Open” to
see the name of the audio/call Bluetooth. Find the Bluetooth name in the
Bluetooth list of the phone and pair; after the audio/call Bluetooth is
connected, the Bluetooth icon of the watch is displayed as (the outer
periphery ) lights up in blue;
Tip: Based on this connection, make sure to tap on various APP
notification synchronization permissions in WearPro settings, to realize
synchronously viewing of various messages from the mobile phone on the watch
side; to realize all connection functions(like making a phone call through the
watch), make sure that both App side and audio Bluetooth are connected to the
phone.
Unbind Bluetooth connection from the APP side
-
Android system unbinds Bluetooth from the APP
In the “Device” column of WearPro, pull down to the “Unbind” and click to unbind the App; -
IOS system unbind APP Bluetooth
In the “Device” column of WearPro, scroll down to “Unbind” and click to unbind the App; then go to the Bluetooth settings of the phone, select the Bluetooth name of the smartwatch, and click “Ignore this device”
After canceling the Bluetooth connection on the APP, the green connection in the middle of The Bluetooth icon of the watch is released, and the blue outside the circle is still lit;
Unbind audio Bluetooth connection
TO disable the audio Bluetooth connection, find the name of the audio
Bluetooth in the Bluetooth settings of the mobile phone, and click “Ignore
this device” to unbind all Bluetooth connections with the watch. After all
operations are completed, the watch’s Bluetooth icon will return to gray,
which means no connection.
Find the device
The watch is successfully bound to the app. Click to find the watch on the
mobile app, and the watch will vibrate once when the screen is on.
Camera
Tap the camera to wake up the watch device’s camera mode, tap the camera
button to take a photo, and the picture will be automatically saved to the
phone system album.
Data synchronization
The watch is successfully bound to the app, and the data from the watch can be
synchronized to the app.
Raise your hand to brighten the screen
Wear the watch correctly on your wrist (left/right hand). When you turn on the
hand-up button, when you lift your wrist to look at the watch, the watch will
automatically brighten the screen.
Do not disturb mode
In the APP Device>More, set the start to end time, such as 12:00 to 14:00 noon
for the do not disturb mode, during this time there will be no phone calls and
message sound reminders on the watch.
Daily alarm clock
In the APP in the APP Device,>More set the start to end time, the alarm can be
set only once or repeatedly select the date (week) setting, and the alarm can
be turned on/off.
Sedentary reminder
Set the start to end time period and the sedentary time interval (minutes)
in the APP, click to enter the repeat setting only once, or select the
sedentary reminder date (week). When the sedentary time is reached, the watch
will vibrate and there will be a sedentary icon.
Drink water reminder
Set the start to end time period and frequency (minutes) in the APP, click to
enter the repeat setting, select the drinking reminder date (week), check the
drinking reminder, and save it. When the reminder time for drinking water
arrives, the watch will vibrate and there will be a drinking water icon.
Dial push
-
Push an existing watch face
Connect to the app, go to Device>Dial Push>Select Dial>, and make sure to replace it with this dial. After the dial is synchronized, the watch will automatically restart and then automatically connect to the app. -
Customize the watch face
Connect to the APP, select Device>Dial Push>(Dials with pen icons belong to custom dials) Custom Dial Settings>You can choose a custom background. After the dial is synchronized, the watch will automatically restart and then automatically connect to the app.
Firmware version
The version of the watch is displayed, and the user can choose to upgrade the
firmware version.
QR code of Alipay payment
The watch features the payment function, which requires the phone to scan the
code to verify the binding. Follow the steps below:
Click the Alipay icon on the main interface(drop-down screen) of the watch,
and complete the binding and use of the personal Alipay account and smartwatch
payment function according to the instructions in the popup box. If you do not
use the watch to pay, you can also unbind it.
Frequently asked questions and answers
Please avoid exposing the device to extreme temperatures that are too cold or too hot for a long time, which may cause permanent damage.
Why can’t I take a hot bath with my watch?
The temperature of the bath water is relatively changed, it will produce a lot
of water vapor, and the water vapor is in the gas phase, and its molecular
radius is small, and it is easy to seep into the gap of the watch case. The
internal circuit of the watch is short-circuited, which damages the circuit
board of the watch and damages the watch.
*No power on, no charging
If you receive the goods and the watch does not turn on, it may be caused by a
collision during the transportation of the watch and the battery Seiko board
has been protected, so plug in the charging cable to activate it.
If the battery is too low or the watch does not turn on after a long period of
time, please plug in the data cable and charge it for more than half an hour
to activate.
Warranty Description:
-
When this product is in normal use, if there are product quality problems caused by manufacturing, materials, design, etc.,
From the date of purchase, the motherboard is guaranteed for free within one year, and the battery and charger are guaranteed for half a year. -
No free warranty is provided for failures caused by the user’s personal reasons, as follows:
1). Failure caused by unauthorized disassembly or modification of the watch.
2). Failure caused by accidental fall during use.
3). All man-made xuns or due to the third party’s fault, misuse (such as: water in the main engine, external force cracking, scratches on peripheral components Damage, etc.) are not covered by the warranty. -
When requesting a free warranty, please provide a warranty card with the date of purchase and the stamp of the place of purchase.
-
When the user repairs the product, please take the product to our company or our company’s dealership.
-
All functions of the product are based on physical objects.
Purchase date:
IMEI code:
Where to buy:
Customer Signature:
Signature of Store Clerk:
Stamp of Store:
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit with different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>