JBC CLMU-A Senior Tip Cleaner with Metal Brushes Instruction Manual

JBC CLMU-A Senior Tip Cleaner with Metal Brushes

Packing List

The following items are included:

Features and Connections

Set Up

The CLU/CLUP allows you to choose between continuous operation and sensor operation. The tip cleaner contains a sensor that detects when the soldering cartridge approaches the window and automatically starts the brush rotation. You can choose between 3 different settings for sensor operation:

Levels can be selected as follows:

1.  Turn on the CLU/CLUP by pressing the On / Off key.
2.  Push the “Sensor Mode” key until the interior light and keypad LEDs make one, two or three blinks. The number of blinks indicates the selected level.
3.  Push the sensor mode button to change to the next level. If the button is held down, the level changes continuously to the next one until the button is released (changes from level 1 to 2, from 2 to 3 and from 3 to 1).

The level configuration is saved by the tip cleaner and will not be changed after the device is restarted.

Keypad

Operation

For best cleaning results, we recommend placing the tip between the two brushes for just 1 second. Longer exposure time would lead to dewetting of tip surface causing oxidation. If excessive pressure is applied with the tool against any of the brushes, the cleaner stops automatically in order to protect the motors. Putting the tool out of the sensor detection area automatically reactivates the cleaner.

Changing Brushes

Changing

Accessories: Brush Range

All brushes are offered with black and blue core, to distingish them when working with lead-free and leaded solder.

Note: As a refereance, the cleaning process should last around 1 second.

IMPORTANT: *Only use the non-metal brushes when they are rotating. Incorrect use will damage them.

USB Connector

Download the latest software from our website to improve your CLUP.

JBC Updater

www.jbctools.com/software.html
Update the cleaner software via USB connection:

JBC Manager

www.jbctools.com/manager.html
Manage and monitor as many stations as your PC can handle by using the JBC Manager. You can export data to another PC

Maintenance

Before carrying out maintenance or storage, always unplug the equipment from the mains.

•  Use a damp cloth to clean the splashguard outside and inside.
•  Check periodically that the sensor’s window is clean. Use a cotton bud with alcohol to clean it.
•  Maintain the brushes and the solder collection tray clean.
•  Brushes (Metal- and Non-Metal Brushes ) can be cleaned by immersing them in isopropyl alcohol. They must be allowed to dry before use.
•  Replace any defective or damaged piece. Use original JBC spare parts only.
•  Repairs should be performed only by a JBC-authorized technical service.

Safety

NOTE: It is imperative to follow safety guidelines to prevent electric shock, injury, fire or explosion.

•  Do not use the appliance for any purpose other than tip cleaning. It is not a tool stand.
•  The AC Adapter power supply must be plugged into approved bases.
•  Do not leave the appliance unattended when it is running.
•  Remove power cord by holding the plug, not the wire.
•  Avoid contact with moving parts.
•  Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when working to avoid harm.
•  This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision.
•  Utmost care must be taken with liquid tin waste which can cause burns.
•  Be careful with the fumes produced when soldering.

Specifications

Warranty

JBC’s 2-year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labor. Warranty does not cover product wear or misuse. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.

This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility.

References

• Manager DOWNLOAD

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>