JBC MS Electric Desoldering Module Instruction Manual

JBC MS Electric Desoldering Module

Packing List

The following items are included:

• Electric Desoldering Module ………………………..1 unit Module Cable
• connector ……………………1 unit Ref. 0026830
• Suction Filter ………………1 unit Ref. 0821830

• Paper Filters Box ……….1 unit Ref. 0005966 Ref. contains 50 filters
• Cotton Filter Set . ………. 1 unit Ref. 0781046 Ref. contains 10 filters
• Manual ………………………..1 unit Ref. 0027989

Features and Connections

Compatibility

Select the equipment that best suits your soldering or desoldering needs .

Maintenance

•  Before carrying out maintenance or storage, always unplug the equipment.
•  Keep the casing clean by using a damp cloth. Especially use a soft cloth for the front side.
•  Periodically check all cable and tube connections.
•  Keep filters clean to ensure proper solder suction and replace them when necessary

Important: Do not use sharp pointed objects to open the suction filter .

•  Use original JBC spare parts only
•  Replace any defective or damaged pieces. Only use original JBC spare parts.
•  Repairs should only be performed by a JBC-authorized technical service.
•  Maintenance must not be carried out by children unless supervised.

Safety

•  Do not use the units for any purpose other than soldering or rework. Incorrect use may cause a fire.
•  The power cord must be plugged into approved bases. Be sure that it is properly grounded before use. When unplugging it, hold the plug, not the wire.
•  Do not work on electrically live parts.
•  The tool should be placed on the stand when not in use in order to activate the sleep mode. The soldering tip or nozzle, the metal part of the tool, and the stand may still be hot even when the station is turned off. Handle with care, including when adjusting the stand position.
•  Do not leave the appliance unattended when it is on.
•  Do not cover the ventilation grills. Heat can cause inflammable products to ignite.
•  Avoid flux coming into contact with skin or eyes to prevent irritation.
•  Be careful with the fumes produced when soldering.
•  Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when working to avoid personal harm.
•  Utmost care must be taken with liquid tin waste which can cause burns.
•  This appliance can be used by children over the age of eight and also persons with reduced physical, sensory or mental capabilities or lack of experience provided that they have been given adequate supervision or instruction concerning use of the appliance and understand the hazards involved. Children must not play with the appliance.
•  Maintenance must not be carried out by children unless supervised.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>