scheppach UMF2000 200cm Universal Mitre Saw Stand Instruction Manual
- June 3, 2024
- Scheppach
Table of Contents
scheppach UMF2000 200cm Universal Mitre Saw Stand
Description
Scope of delivery
Introduction
MANUFACTURER:
scheppach Fabrikation von Holzbearbeitungsmaschine GmbH Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
We hope your new tool brings you much enjoyment and success
NOTE:
According to the applicable product liability laws, the manufacturer of the
device does not assume liability for damages to the product or damages caused
by the product that occurs due to:
- Improper handling,
- Non-compliance of the operating instructions,
- Repairs by third parties, not by authorized service technicians,
- Installation and replacement of non-original spare parts,
- Application other than specified,
Unpacking
- Open the packaging and remove the device carefully.
- Remove the packaging material as well as the packaging and transport bracing (if available).
- Check that the delivery is complete.
- Check the device and accessory parts for transport damage.
- If possible, store the packaging until the warranty period has expired.
ATTENTION
The device and packaging materials are not toys! Children must not be allowed
to play with plastic bags, film and small parts! There is a risk of swallowing
and suffocation!
Technical Specifications
- Dimensions (LxWxH) in mm 1160-2000 x 632 x 900-1000
- Load in kg 250
- Weight in kg 13,5
Maintenance
General maintenance measures
- We recommend that you clean the equipment immediately after you use it.
- Clean the equipment regularly with a damp cloth and some soft soap. Do not use cleaning agents or solvents; these may be aggressive to the plastic parts in the equipment. Ensure that no water can get into the interior of the equipment.
Storage
Store the device and its accessories in a dark, dry and frost-proof place that is inaccessible to children. The optimum storage temperature is between 5 and 30˚C.
Warranty
Apparent defects must be notified within 8 days from the receipt of the goods. Otherwise, the buyerís rights of claim due to such defects are invalidated. We guarantee for our machines in case of proper treatment for the time of the statutory warranty period from delivery in such a way that we replace any machine part free of charge which provably becomes unusable due to faulty material or defects of fabrication within such period of time. With respect to parts not manufactured by us we only warrant insofar as we are entitled to warranty claims against the upstream suppliers. The costs for the installation of the new parts shall be borne by the buyer. The cancellation of sale or the reduction of purchase price as well as any other claims for damages shall be excluded
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>